How to Use Car Glass Anti-Fog Spray?

1 Answers
ErinDella
07/29/25 10:07am
The method of using car glass anti-fog spray is: 1. Pour a small amount of anti-fog spray onto a cotton cloth or tissue; 2. Wipe the glass surface back and forth and let it dry; 3. Reapply if necessary to maintain a fog-free state. Precautions for using glass anti-fog spray include: 1. Store in a well-ventilated area, away from direct sunlight, fire, or heat sources; 2. Do not inhale the spray, as it may cause drowsiness or dizziness; 3. Do not crush, puncture, or burn the can, as empty cans are flammable and should be discarded promptly; 4. Keep out of reach of children and store away from them; 5. Ensure a sufficient thickness of the anti-fog film to guarantee excellent anti-fog performance.
Was this review help?
6
0
Share
More Forum Discussions

What does it mean when the ESC system is turned off?

ESC system being turned off means the electronic stability control system is deactivated. Press and hold the ESC-off button to reactivate this system. Below are specific details about the ESC system: 1. If the system is turned off due to a malfunction, it is recommended to repair it immediately. Continuing to drive with a faulty ESC system poses certain safety risks. The ESC system is the vehicle's electronic stability control system, which is also referred to as ESP on some cars. 2. The electronic stability control system is highly complex, consisting of numerous sensors. The ESC system can monitor wheel speed through wheel speed sensors and track the vehicle's operating state via lateral acceleration sensors, yaw rate sensors, brake pressure sensors, and steering angle sensors, among others. 3. If the ESC system detects that the vehicle's trajectory does not match the driver's intended path, it will intervene and adjust. The ESC system is crucial for maintaining driving stability. Without it, the vehicle would be much harder to control and more prone to losing stability.
20
3
Share

What does 5W in engine oil mean?

Engine oil 5W represents the low-temperature fluidity of the oil as 5W. W stands for Winter; the smaller the number before W, the better the low-temperature fluidity of the oil, and the lower the ambient temperature it can be used in. Here is some introduction to engine oil: 1. Engine oil classification: There are two types, one for gasoline engines and the other for diesel engines. Oils starting with S are for gasoline engines, with quality levels ranging from SA to SN, totaling 12 types; oils starting with C are for diesel engines, with levels including CA, CB, CC, CD, CE, CF, etc. 2. Engine oil viscosity specifications: Different types of oil have their own viscosity specifications. Taking 5W30 oil as an example, 5 represents the cold start performance of the oil, the smaller the number, the stronger the oil's cold resistance; 30 represents the kinematic viscosity standard at 100 degrees Celsius.
16
4
Share

How many kilometers is the first maintenance suitable for the 2019 Bora?

The first maintenance for the 2019 Bora is suitable at 5,000 kilometers. The maintenance items include: 1. Replace the engine oil, oil filter, air filter, and fuel filter; 2. Inspect the body and tires; 3. Inspect the braking system; 4. Inspect the chassis for damage; 5. Check the fluid levels. The 2019 Bora is a compact 4-door 5-seater sedan with body dimensions of: length 4562mm, width 1793mm, height 1468mm, and a wheelbase of 2614mm. It is equipped with a 1.5L engine and a 5-speed manual transmission, with a maximum power of 82 kW and a maximum torque of 145 Nm. The drivetrain is front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using torsion beam non-independent suspension.
5
4
Share

How to Adjust the Height Position of Car Seats?

Methods for adjusting the height position of car seats: 1. Height adjustment: Everyone has a different body shape. For most sedans and SUVs, there should be a distance of one to two fists between the top of the head and the roof, ensuring the eye level is slightly above the center of the vertical distance of the front windshield. 2. Forward and backward adjustment: The feet should be able to fully depress the clutch and brake pedals, and when holding the steering wheel, the arms should be slightly bent. 3. Steering wheel adjustment: Extend the arm to rest on the top of the steering wheel, with the wrist just able to reach the edge of the steering wheel. 4. Backrest angle adjustment: Avoid reclining too much or sitting too upright, as this reduces the distance between the body and the steering wheel, potentially increasing the risk of injury from the airbag in an emergency. 5. Headrest height adjustment: The headrest should be level with the head, or the soft middle part of the headrest should align with the top of the ears. 6. Lumbar support adjustment: It is not recommended to set it too high or too low; a moderate setting is best.
5
2
Share

What does the oil grade 0w40 mean?

The oil grade 0w40 refers to the classification of the oil. The number before the 'w' represents the oil's viscosity at low temperatures, with a smaller number indicating better fluidity and cold resistance. The number after the 'w' represents the oil's viscosity index at high temperatures, with a higher number indicating greater viscosity. Oil, also known as engine lubricant, serves to lubricate and reduce friction in the engine, assist in cooling, seal against leaks, prevent rust and corrosion, dampen shocks, and resist wear. The steps for changing the oil are: 1. Lift the vehicle, remove the undercarriage protection panel, and place a container of about 10 liters under the oil drain plug; 2. Unscrew the oil drain plug and use an air gun to blow into the oil filler port for two minutes; 3. After draining, tighten the oil drain plug and wipe it with a tissue to check for leaks; 4. Reinstall the undercarriage protection panel, lower the vehicle, and use a funnel to add oil through the filler port.
15
2
Share

How to Match the Tire Pressure Monitoring System on Baojun 310?

Baojun 310's tire pressure monitoring system requires professional computer equipment for rematching, and it is recommended to visit a 4S dealership for system matching. When tire pressure is too high, the tire surface becomes curved, reducing the contact area with the ground. A vehicle's power output relies on the static friction generated between the tires and the ground. Insufficient contact area can lead to sliding friction, resulting in loss of power and torque output, especially noticeable during rapid acceleration. Conversely, low tire pressure causes uneven wear, with the center of the tire wearing less and the sides wearing more. This also increases rolling resistance, leading to higher fuel consumption. Low tire pressure also increases the risk of a blowout because the softer tires undergo repeated deformation during high-speed driving, generating excessive heat that can cause a blowout. Therefore, it is essential to inflate the tires according to the manufacturer's recommended standards.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.