How to Use Car Dashboard Wax?

How many points will be deducted for changing lanes by crossing a solid white line?

Changing lanes by crossing a solid white line will result in a deduction of 3 points. Crossing a solid line to change lanes is a violation of road traffic safety regulations. Below is relevant information about solid white lines and dashed white lines: Information about solid white lines: Solid white lines prohibit crossing the same-direction lane dividing line and are established to distinguish different lanes. When painted on road sections, they are used to separate motor vehicles and non-motor vehicles traveling in the same direction or to indicate the edge of the lane; when painted at intersections, they can serve as guide lane lines or stop lines. When a motor vehicle driver operates a vehicle on the road and crosses a solid white line, this behavior constitutes a violation of prohibited marking instructions and will result in a penalty of 3 points. In addition, the driver's action also seriously violates the road traffic safety laws and regulations regarding road traffic and may be subject to penalties such as a warning. Information about dashed white lines: Dashed white lines can be used to change lanes. When painted on road sections, they are used to separate traffic flows traveling in the same direction or as safety distance recognition lines; when painted at intersections, they are used to guide vehicle movement.

8

1

Share

Can you change lanes on double yellow dashed lines?

If double yellow dashed lines serve as road dividers, lane changing is not permitted. Crossing the line constitutes driving against traffic and will be penalized as such, with full liability in case of an accident. However, if the double yellow dashed lines mark a tidal flow lane, lane changing is allowed under the condition of ensuring safety and not disrupting other vehicles. Therefore, the specific function of double yellow dashed lines determines the applicable rules. Traditional double yellow lines, whether dashed or solid, act as road dividers to separate opposing traffic flows. This means vehicles must stay to the right of the double yellow lines. Crossing them indicates entering the opposite lane, which is considered driving against traffic and subject to penalties. In the event of a collision with an oncoming vehicle, the driver crossing the double yellow lines bears full responsibility. Overtaking by crossing double yellow lines is also prohibited. This implies that if a vehicle is traveling in the innermost lane, passing must be done by accelerating on the right side, not by overtaking from the left in the opposing lane. Double yellow dashed lines as tidal flow lanes represent a relatively new regulation aimed at improving traffic efficiency. These are implemented on sections with heavy one-way traffic, introducing new markings and traffic patterns. For example, during morning rush hours, eastbound traffic may be heavy while westbound traffic is light. Traffic police can then designate tidal flow lanes based on real-time traffic conditions, allowing the lane direction to be flexibly adjusted and enabling lane changes.

19

0

Share

What is the safe following distance when driving at 100 km/h on highways?

When driving on highways, if the vehicle speed exceeds 100 km/h, the driver should maintain a distance of at least 100 meters from the vehicle ahead in the same lane. When the speed is below 100 km/h, this distance can be appropriately reduced, but the minimum distance should not be less than 50 meters. When driving on highways under low visibility weather conditions such as fog, rain, snow, sandstorms, or hail, the following regulations should be observed: When visibility is less than 200 meters, turn on fog lights, low beam headlights, clearance lamps, and front and rear position lights. The speed should not exceed 60 km/h, and maintain a distance of at least 100 meters from the vehicle ahead in the same lane. When visibility is less than 100 meters, turn on fog lights, low beam headlights, clearance lamps, front and rear position lights, and hazard warning flashers. The speed should not exceed 40 km/h, and maintain a distance of at least 50 meters from the vehicle ahead in the same lane. When visibility is less than 50 meters, turn on fog lights, low beam headlights, clearance lamps, front and rear position lights, and hazard warning flashers. The speed should not exceed 20 km/h, and exit the highway as soon as possible from the nearest exit.

7

5

Share

What Causes Water Accumulation Under the Driver's Side Floor Mat?

Water accumulation under the driver's side floor mat can be caused by sunroof leaks, residual water from car washing, or leaks from the heater core. Sunroof Leaks: Blocked drainage holes or deteriorated sealing strips in the sunroof can allow water to enter the cabin. Most vehicles have sunroof drainage holes at the four corners of the sunroof, which can be located by opening the sunroof. These can be cleared using a syringe or compressed air. The sunroof sealing strips, made of rubber, may degrade over time and require replacement to resolve the issue. Residual Water from Car Washing: Negligence during car washing can lead to water entering the cabin, which, if not promptly removed, results in water accumulation. The solution involves removing the soaked carpet or floor mat, opening the sealing plugs under the chassis to quickly drain the water. However, since interior materials like floor coverings are highly absorbent, they should be removed and placed in a ventilated area to facilitate evaporation. Parking the vehicle outside to dry or setting the air circulation to internal recirculation can help expel moisture from the cabin through the air conditioning system. Heater Core Leaks: The heater core is located behind the dashboard inside the cabin, enclosed by the dashboard. If the heater core becomes clogged or corroded, it may leak, causing water to accumulate under the driver's floor mat. It is advisable to have the heater core inspected at a repair facility and replaced if necessary.

15

2

Share

Is INT an automatic rain-sensing wiper?

INT is not an automatic rain-sensing wiper. INT stands for the automatic intermittent function of the wiper. Below is a detailed introduction to the automatic sensing function of the wiper and the automatic rain-sensing wiper: Automatic Intermittent Function: When the automatic intermittent function mode of the wiper is turned on, the wiper will work intermittently instead of continuously. This function can be manually activated using the wiper control lever by simply turning the gear to the INT position. Automatic Rain-Sensing Wiper: AUTO automatic rain-sensing wiper allows the owner to choose the appropriate wiper working mode based on the remaining amount. Adjust the wiper control lever to the AUTO mode, and then the corresponding sensor in the car will control the operating speed of the wiper according to the amount of rain without manual intervention. Precautions for Using Car Wipers: Do not operate the wiper directly without spraying windshield washer fluid, as dry wiping can easily cause abnormal wear of the wiper blade and damage to the wiper motor. If the windshield is too dirty, it is best to gently clean the dirt on the windshield with a dry cloth first to reduce unnecessary wear on the wiper. When the wiper blade does not wipe properly, try soaking the blade with water first, then sand it back and forth with water sandpaper, rinse it clean with water, and place it back on the windshield. Then try wiping again to see if there are any uneven areas. If the problem persists, you can try this method several times. This method is mainly used when the wiper blade is slightly damaged.

8

4

Share

What to Do When Insect Residue on Car Paint Won't Wash Off?

Spray an appropriate amount of insect residue remover on the areas with insect residue and resin, let it sit for 30-60 seconds, and then it can be removed. Here are some related introductions to car paint care: 1. Neutral running water for car washing: When washing the car yourself, use special neutral running water, and avoid using overly alkaline soapy water to prevent washing away the oils in the paint. When washing the car at a car wash, do not let the car wash attendant use wax-stripping detergents, otherwise the paint surface may be damaged. In coastal areas or areas with severe pollution, it is recommended to rinse the car once a day. 2. Sponge washing: Use a clean, soft sponge when washing the car, and ensure that no metal shavings or sand particles are mixed in. Do not use dry cloths or towels to wipe the car to avoid leaving scratches. When wiping, gently wipe in the direction of the water flow from top to bottom, avoiding circular or horizontal motions. 3. Polishing: Car paint polishing should not be done frequently because polishing involves grinding away the scratched or faded surface layer of the paint to reveal the fresh paint underneath. However, car paint cannot regenerate, and the already thin paint layer will become thinner and thinner after polishing, weakening the paint's self-protection ability and eventually leading to irreversible aging.

4

5

Share

How to Use Car Dashboard Wax?

How many points will be deducted for changing lanes by crossing a solid white line?

Can you change lanes on double yellow dashed lines?

What is the safe following distance when driving at 100 km/h on highways?

What Causes Water Accumulation Under the Driver's Side Floor Mat?

Is INT an automatic rain-sensing wiper?

What to Do When Insect Residue on Car Paint Won't Wash Off?

Why Won't My Infiniti Start?

How Often Should the High-Pressure Fuel Pump Be Replaced?

What does the validity period of B2 driver's license inspection mean?

How long after submitting a driver's license application can one take the test?