How to Use Car Air Conditioning in Summer?

How to Reset the Maintenance Reminder for Volkswagen Sagitar?

To reset the maintenance reminder for the Volkswagen Sagitar, follow these steps: 1. Press and hold the maintenance reset shortcut button on the Sagitar; 2. Depress the driver's brake pedal; 3. Turn the key to the 'on' position; 4. When the dashboard lights up, release the maintenance reset shortcut button and press it again; 5. Press the OK button on the multifunction steering wheel to confirm the reset. The Sagitar measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. The vehicle is equipped with the Volkswagen MIB infotainment system, featuring an 8-inch capacitive touchscreen that integrates Bluetooth, navigation voice control, rearview camera, OPS, CarPlay, and CarLife among other practical functions.

7

5

Share

Where is the air conditioning filter located in the Jiangling Baodian?

Jiangling Baodian's air conditioning filter is located inside the black plastic panel above the co-driver's foot mat. There is a black plastic panel above the co-driver's foot mat with two retractable clips. Bend and remove the clips. Disconnect the negative terminal of the battery, then remove the body computer and its mounting bracket. Remove the panel on the left side of the co-driver's seat, which is secured by four screws. After removing them one by one, the air conditioning filter will be visible. The Jiangling Baodian has a length of 5345mm, width of 1835mm, height of 1782mm, and a wheelbase of 3085mm. This vehicle features a new design with a more popular black and blue background, white lettering, and red pointer instrument panel, which is reasonably laid out, clear and easy to read, and more sporty.

8

4

Share

Is Higher Gear Oil Viscosity Always Better?

Gear oil viscosity is not always better when higher; the appropriate level is sufficient. The basic performance characteristics of gear oil are as follows: 1. Sufficient extreme pressure anti-wear properties. Extreme pressure anti-wear properties are the most important and primary feature of gear oil, which prevents wear, scuffing, and scoring of gear surfaces during operation. 2. Good demulsibility. If gear oil emulsifies upon contact with water, it can severely affect the formation of lubricating oil films, leading to scuffing and wear. 3. Good oxidation stability and thermal stability. Excellent thermal oxidation stability ensures the service life of the oil. 4. Good anti-foaming properties. If generated foam does not dissipate quickly, it can hinder the formation of oil films at gear meshing points, and the entrained foam reduces the actual working oil volume, affecting heat dissipation. 5. Good rust and corrosion prevention. Corrosion and rust not only damage the geometric characteristics and lubrication state of gears but also cause further deterioration of the gear oil, creating a vicious cycle.

15

2

Share

What does the yellow triangle with an exclamation mark on the Toyota Sienna dashboard mean?

A triangle with an exclamation mark indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark is the automatic transmission fault warning light, indicating a transmission issue or low transmission fluid level. The transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, typically indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire pressure anomaly: A bracket with a horizontal line and an exclamation mark in the middle is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

2

1

Share

Do You Need AC for Car Air Conditioning in Winter?

You don't need to turn on the AC for car air conditioning in winter because what you need is warm air, or heated air. More information about cars is as follows: 1. The warm air is generated by converting the heat from the engine's antifreeze; 2. AC is the air conditioning cooling button. Pressing this button will start the air conditioning compressor, and on some models, the indicator light on the button will illuminate, while others may display a prompt on the central control screen. If you turn off this switch, the car air conditioning can only blow natural air or warm air. During the use of air conditioning in winter, because most vehicles now use automatic air conditioning, you may find that the AC function is automatically turned on after starting the air conditioning. The reason for this situation is: if the driver sets the air outlet direction to the front windshield, the defrosting function will be activated, and the automatic air conditioning system will automatically turn on the AC switch. This is normal because the design is intended to use cold air for the fastest defogging effect.

2

Share

What is the normal value of an automotive air conditioning pressure gauge?

When the automotive air conditioning is running, the red gauge indicates high pressure, and the blue gauge indicates low pressure. The normal values are 1.3-1.7 MPa for high pressure and 0.1-0.25 MPa for low pressure. However, the normal pressure of the air conditioning system can also vary due to changes in external environmental conditions. Below is more information about automotive air conditioning pressure: 1. The data units on an automotive air conditioning pressure gauge generally include megapascals (MPa), bars, kilopascals (kPa), and pounds (psi). Different vehicle models may display different units, so it is necessary to convert the normal range according to the display unit of your specific vehicle. 2. The conversion between these three units is as follows: 1 megapascal equals 10 bars, equals 1000 kilopascals, equals 145 pounds.

4

Share

How to Use Car Air Conditioning in Summer?

How to Reset the Maintenance Reminder for Volkswagen Sagitar?

Where is the air conditioning filter located in the Jiangling Baodian?

Is Higher Gear Oil Viscosity Always Better?

What does the yellow triangle with an exclamation mark on the Toyota Sienna dashboard mean?

Do You Need AC for Car Air Conditioning in Winter?

What is the normal value of an automotive air conditioning pressure gauge?

How to Determine if the Tensioner Pulley is Faulty?

What to Pay Attention to After Buying a Car

How to Replace the Low Beam Headlight on Roewe 350?

Where is the air conditioning filter element of the Tiguan located?