How to Use BMW Cruise Control?

1 Answers
StMargaret
07/30/25 1:05am
The following introduces the usage of BMW cruise control: 1. The BMW cruise control switch is located on the left side of the steering wheel, with a total of three buttons. The I/0 button is used to turn the cruise control on or off. 2. Press the I/0 button to activate the function, and the central control screen will display that the cruise system is ready. 3. When driving reaches the desired speed, press the "SET" button to set the vehicle at the current cruising speed, and release the accelerator pedal to achieve cruise control. 4. To adjust the speed, you can use the lever. Pushing it up is to accelerate; pushing it down is to decelerate. 5. Press the brake pedal or clutch pedal to cancel the cruise system. Press the "RES" button to restore the original speed. Press the I/0 button again to cancel the cruise control.
Was this review help?
13
0
Share
More Forum Discussions

Which model is the Sylphy 59800?

Sylphy 59800 refers to the Sylphy Classic model. The exterior of the Sylphy Classic is quite similar to the newer models, but the rear emblem has been updated—newer models feature the SYLPHY Classic badge. The Sylphy 59800 is positioned as a family-oriented compact car, with dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, and a wheelbase of 2712mm. It is powered by a 1.6L naturally aspirated engine, delivering a maximum power of 139 horsepower and a peak torque of 169 Nm. The transmission options include a 5-speed manual gearbox and a CVT (continuously variable transmission).
7
1
Share

What are the symptoms of a broken suspension bushing?

Symptoms of a broken suspension bushing include: 1. Hearing a metallic clanging sound when going over speed bumps, cobblestone roads, or dirt roads; 2. Continuous unusual noises on roads with large potholes; 3. If the damage is severe, it will continuously transmit minor vibrations to the steering wheel. The purpose of the bushing is to prevent vibrations and noise. If there are unusual noises when driving on uneven roads, it should be replaced promptly. The hard connection between the suspension and other metal parts relies on the bushing to buffer vibrations and noise between the metals. If the bushing is aged, it cannot function as a shock absorber, leading to metal parts colliding and producing unusual noises, which in turn affects the vehicle's stability and buffering capability during driving.
19
2
Share

Where is the fuel tank located in a sedan?

The fuel tank of a sedan is generally positioned towards the middle-rear section of the vehicle. However, depending on the model, some fuel tanks are located on the right side while others on the left. This applies to most vehicles, though there are exceptions. For instance, the Honda Fit hatchback has its fuel tank positioned in the middle of the car, essentially beneath the driver's seat, to maximize rear passenger space. The placement of the fuel filler neck considers not only refueling convenience but also safety factors. If you can't remember the location of the fuel filler neck, check the fuel gauge on the dashboard—the small arrow indicates which side it's on. Vehicles with a single exhaust pipe typically have the exhaust pipe positioned opposite to the fuel tank.
9
3
Share

What are the solutions for failing the driving test five times?

Here is a detailed introduction to the solutions for failing the driving test five times: 1. Invalid results and restarting the learning process: In the driving test, the number of scheduled attempts for the road driving skills test (Subject 2 and Subject 3) must not exceed five. If the fifth attempt is still unsuccessful, the results of other previously passed subjects will be invalidated, and the candidate must restart the process from Subject 1. 2. Test items: The motor vehicle driving test is conducted to obtain a motor vehicle driver's license. It follows a nationally unified set of test subjects and passing standards. The test is divided into three subjects and four test items, including theoretical knowledge, field driving skills, road driving skills, and knowledge related to civilized driving. The specific test items vary according to the type of vehicle for which the license is being sought.
13
3
Share

What are the starting steps for the Sylphy?

Sylphy starting steps: For the new Sylphy with one-push start configuration, simply press the brake pedal and push the one-push start button; for the regular version of the new Sylphy, you need to use a mechanical key to start it, just press the brake pedal and turn the mechanical key. The Sylphy is a compact sedan produced by Dongfeng Nissan. The Sylphy has a length, width, and height of 4641mm, 1815mm, and 1450mm respectively, equipped with a 1.6-liter naturally aspirated engine, with a maximum horsepower of 139, a maximum power of 102kw, a maximum torque of 169nm, and options for a 5-speed manual or CVT continuously variable transmission.
1
0
Share

How to Check if Subject 1 Exam Appointment is Successful?

Generally, you will receive an SMS notification from the vehicle management office two days before the scheduled appointment date. Receiving this notification indicates a successful appointment. Here are the relevant details: 1. Subject 1: Subject 1, also known as the Subject 1 theory test or driver's theory test, is part of the motor vehicle driver's license assessment. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the test content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test format is computer-based, consisting of 100 questions, with a passing score of 90 or above. 2. Notes: It's important to note that once an appointment is made, you cannot view information about other test sessions unless you cancel the appointment. Each subject can only be canceled three times.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.