How to Use Auto Start-Stop and Auto Hold Together?

3 Answers
LaJaxson
07/29/25 5:14pm
Auto Hold and Auto Start-Stop can be used together, and when utilized properly, these two functions can also save fuel. Here is the relevant information: 1. While driving, simply press the brake pedal, and the engine will automatically shut off approximately two seconds after the vehicle comes to a complete stop. Keeping the brake pedal pressed will maintain the engine in the off state. As soon as you release the brake or turn the steering wheel, the engine will immediately restart, allowing you to press the accelerator and start moving—all while remaining in D (Drive) gear. 2. Once this function is activated, for example, when stopping at a traffic light, it is equivalent to not having to engage the handbrake. This feature is particularly useful on slopes and during frequent stops and starts. The electronic handbrake is also known as the electronic parking brake system.
Was this review help?
5
4
Share
DominicMarie
08/14/25 7:44am
I always love using these two features together during my daily commute. When stopping at a red light, the auto start-stop system turns off the engine to save fuel, while the auto hold function frees my foot from constantly pressing the brake pedal. When starting off, a light tap on the accelerator immediately restarts the engine and releases the hold, making the operation super smooth. This saves me dozens of yuan on fuel each month and reduces exhaust emissions. However, it's important to monitor the car battery health—if the start-stop frequently malfunctions, the battery might be failing. Additionally, the auto hold is especially safe on slopes or in traffic jams to prevent rolling. Just make sure the settings are enabled and activated in the menu. Simple and practical, it enhances driving pleasure, but don't forget regular maintenance.
Was this review help?
15
0
Share
Expand All
LeParker
10/13/25 5:42am
I often use the combination of auto start-stop and auto hold for city commuting. When waiting at a red light, the engine shuts off to save fuel, and the auto hold function keeps the vehicle stationary without tiring my feet. The engine restarts smoothly and seamlessly when accelerating from a standstill. There are many benefits: fuel savings of about 10%, reduced emissions for environmental protection, and extended brake pad life. The only minor issue is that the start-stop function may not work when the battery is weak, requiring timely replacement. It's recommended to check and enable the settings upon starting the car, as some vehicles have an eco mode to assist. Overall, it makes driving more relaxed and comfortable, especially suitable for daily traffic jams. Once you get used to it, it doesn't feel troublesome at all—energy-efficient and highly effective.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

What procedures are required for a change of vehicle ownership?

Car transfer requires the following procedures: vehicle inspection, license plate removal, photography, number tracing, invoice issuance, change of vehicle owner, number selection, license plate installation, obtaining the updated registration certificate, and a new vehicle license. Documents required for vehicle transfer: ID cards of the original owner and the new owner; The vehicle's motor vehicle registration certificate; The vehicle's motor vehicle license. For the transfer process, we only need to prepare the above three documents. It should be noted that if the owner is not a local resident, a valid temporary residence permit or residence permit is also required. In areas with license plate restrictions or purchase limits, the new owner must also prepare the corresponding license plate quota documents. Additionally, the motor vehicle registration certificate must be in normal status and eligible for transfer; vehicles with mortgages or abnormal status cannot be transferred. The motor vehicle license must be complete. Detailed steps for the transfer process: Vehicle inspection: Similar to the inspection process for new vehicles, this involves checking the vehicle's appearance, any modifications, or abnormalities. Note that if the vehicle has obvious external modifications, such as added external steps, these must be removed before passing the inspection. Number tracing, license plate removal, and photography can be considered part of the vehicle inspection process. Number tracing involves imprinting the chassis number and engine number. License plate removal means taking off the vehicle's license plate for recycling by the vehicle management office. Photography is the final step of the inspection, with photos used to compare any changes in the vehicle's appearance and for the new vehicle license. Simply follow the staff's instructions. Invoice issuance typically involves issuing a second-hand vehicle transaction invoice. Vehicle ownership transfer involves a change in ownership. Unless it's a change between co-owners of shared property, it is considered a transaction change, requiring a second-hand vehicle transaction invoice to prove the vehicle was acquired through a sale. Changing the vehicle owner, selecting a number, installing the license plate, obtaining the updated registration certificate, and a new vehicle license are essentially the steps for re-registering the vehicle under the new owner. This process is the same as registering a new vehicle: selecting a number, installing the license plate, and receiving the motor vehicle registration certificate and license. Once you receive the updated motor vehicle registration certificate and the new motor vehicle license, and after installing the license plate, the vehicle transfer process is complete, and the new owner becomes the legal owner. Note that the motor vehicle registration certificate is not reissued; instead, the change of ownership is recorded on the content page of the existing certificate, indicating the new owner. At this point, the vehicle transfer process is fully completed.
9
4
Share

Can the BMW 5 Series remotely start the air conditioning?

No, according to official configuration data, the BMW 5 Series does not have a remote start function. The relevant explanations are as follows: 1. Introduction: The 2019 BMW 5 Series configuration has added an electric trunk lid and chrome trim on the front seat back panels for mid-to-low-end models. However, some chrome decorative parts and vehicle first aid kits that are not frequently used. 2. Configuration: It brings users many comfort configurations such as LED adaptive headlights, automatic high/low beam switching, Harman Kardon audio system, wireless charging, Wi-Fi hotspot with built-in data package, comfort access, automatic anti-glare mirrors, front/rear seat heating, and four-zone air conditioning.
4
2
Share

Is the Suzuki Dream Engine Imported?

Suzuki Dream's engine is not imported. Here is the relevant introduction of the Suzuki Dream: 1. Suzuki Dream's engine: The Suzuki Dream is equipped with Suzuki's new UM125 engine, which is the same engine used in Suzuki's high-end fuel-injection scooter UM125. It incorporates leading technologies such as high-efficiency combustion, dual oil filters, high-position intake, direct cooling injection, wide-range CVT, full-time silent operation, 18-pole magnetic motor, and lightweight piston. 2. Suzuki Dream's appearance: The overall dimensions of the Dream are 1795×660×1080mm, with a wheelbase of 1230mm, seat height of approximately 730mm, ground clearance measured at about 130mm, and a curb weight of 113kg.
18
3
Share

What is the BMW FRM module?

It is the Footwell Module. Below is relevant information about the BMW FRM: 1. Introduction: The Footwell Module, abbreviated as FRM, consists of a circuit board equipped with a CPU. Its primary function is to control the vehicle's windows, doors, headlights, and communication systems, making it a crucial component of the vehicle's control system. 2. Causes of damage: Typically, the issue arises from data loss in the CPU on the circuit board, leading to control failures in lights, windows, and doors. 3. Data loss: This can occur due to the ignition switch being left on during battery replacement, battery terminal grounding, or other unprofessional battery handling procedures.
2
0
Share

What are the causes of X-Trail CVT transmission failure?

X-Trail CVT transmission failure may be caused by the following reasons: 1. Transmission oil leakage: The transmission casing may experience wear due to external factors, or sealing components may age over time, leading to fluid leakage. 2. Damage to components like the oil pump: After prolonged use, transmission fluid can deteriorate due to continuous friction. If not replaced timely, the fluid loses its lubricating properties, causing accelerated wear of components during operation. 3. Burned transmission clutch: If the engine revs without noticeable acceleration while driving, it's likely due to clutch wear or burning from long-term use. 4. Overheating: Other causes of transmission failure include water ingress and excessive temperature. These abnormal conditions can lead to symptoms like jerking during driving and poor acceleration.
1
3
Share

Why is the fan noise very loud when the Jetta's air conditioning is turned on?

The specific reasons for abnormal noise when the Jetta's air conditioning is turned on are as follows: 1. Compressor electromagnetic clutch failure: Since the compressor often operates at high loads with speed variations from low to high, it places high demands on the electromagnetic clutch. The clutch is usually installed close to the ground and frequently exposed to rain and mud. When the bearing inside the electromagnetic clutch is damaged, it will cause noise. 2. Improper tightness of the compressor drive belt: Whether the compressor drive belt is too tight or too loose can affect the lifespan of the electromagnetic clutch. If the drive belt is too loose, the electromagnetic clutch is prone to slipping. If the drive belt is too tight, the load on the electromagnetic clutch will increase. 3. Lack of lubricating oil in the compressor: Improper use of lubricating oil may lead to compressor wear and scrapping.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.