How to Use Audi's Electronic Parking Brake?

1 Answers
StKaylee
07/29/25 8:52pm
There is a button near the gear lever, offering both manual and automatic parking modes. The electronic parking brake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking braking control through the friction generated between the brake disc and the brake pads.
Was this review help?
2
2
Share
More Forum Discussions

Is it necessary to clean the throttle body?

Throttle body requires regular cleaning for the following reasons: After prolonged use, carbon deposits will accumulate near the air flow valve plate, causing slight sticking and poor rotation of the air flow valve plate. This blocks the reserved idle air intake, leading to sluggish throttle response and unstable idle speed or stalling issues. The benefits of regular throttle body cleaning include: 1. Effectively removing deposits and carbon buildup from the fuel injectors, maintaining fuel system cleanliness; 2. Cleaning the exhaust gas recirculation system, reducing emissions and saving fuel, thereby effectively protecting the oxygen sensor and catalytic converter; 3. Preventing symptoms such as knocking, unstable idle speed, and poor acceleration caused by deposits and carbon buildup.
20
2
Share

Where is the water pump located in the new Jetta?

The water pump in the new Jetta is installed on the rear side of the engine. Below are the location of the water pump in the new Jetta and the repair method for water pump leakage: Location of the water pump in the new Jetta: The Jetta's water pump is installed on the rear side of the engine. Automotive engines widely use centrifugal water pumps. Its basic structure consists of the pump housing, connecting plate or pulley, pump shaft and bearings or integrated shaft bearings, pump impeller, and water seal assembly, among other components, making it a major part of the automobile. Repair method for water pump leakage: Disassembling the water pump: First, drain all the coolant from the water pump, remove the V-belt, use special tools to press out the water pump pulley, and then remove the water pump. Water pump disassembly: Use special tools to first remove the water pump bearings, then detach the water pump impeller and seal assembly from the bearings. Replace the sealing ring, new gasket, new V-belt, and new pulley. Assembly: Use special tools to first press the bearings onto the water pump impeller, then press the impeller and seal assembly into their designated positions. Press the water pump bearings into the pulley seat, ensuring the bearing end face is flush with the housing during operation, and the impeller plane is 0.1-0.3mm below the pump housing plane. Inspection: The assembled water pump should have a shaft that rotates smoothly, and the water pump bearings should have no noticeable radial play. Refill with new coolant.
14
1
Share

What car brand has a horse head logo?

A car with a horse head logo is Baojun, and its models include: Baojun 510, Baojun 730, Baojun 530, Baojun 310, Baojun 360, etc. Taking the 2021 Baojun 510 as an example, its body dimensions are: 4220mm in length, 1740mm in width, and 1615mm in height, with a wheelbase of 2550mm and a fuel tank capacity of 45 liters. The 2021 Baojun 510 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5T naturally aspirated engine, delivering a maximum horsepower of 99 PS, a maximum power of 73 kW, and a maximum torque of 135 Nm, paired with a 6-speed manual transmission.
20
0
Share

Is the Throttle Booster Useful?

Throttle booster is useful. The throttle booster can amplify the throttle signal and re-control the opening and closing of the throttle. When the accelerator pedal is pressed, it collects the signal from the accelerator pedal position sensor and transmits the reorganized throttle signal to the computer, improving the engine's response performance. This enhances throttle sensitivity, speeds up acceleration, and ultimately achieves an instant acceleration effect. The functions of the throttle booster include: 1. Helping the vehicle accelerate; 2. Acceleration switch function; 3. Acceleration level adjustment function; 4. Acceleration mode switching function; 5. Preventing engine carbon buildup; 6. Improving throttle sensitivity for easier acceleration.
20
4
Share

Do hybrid vehicles need to be charged?

Hybrid vehicles do not need to be charged as they are not equipped with charging devices. The reason hybrid vehicles do not require charging is that when the engine does not need to provide high power, part of the engine's power is used to generate electricity. Additionally, the kinetic energy reduced during vehicle deceleration and braking is converted into electrical energy and stored in the battery. The characteristics of hybrid vehicles in use include: 1. Fuel efficiency—they use electric power for low-speed driving and switch to fuel only during high-speed driving when high power output is needed, reducing fuel consumption and making them ideal for urban driving; 2. Strong acceleration—electric drive provides rapid acceleration without delay; 3. Low noise—electric drive operates quietly and comfortably without the noise of a traditional engine.
8
1
Share

What are the symptoms of a clogged diesel fuel filter?

The symptoms of a clogged diesel fuel filter include insufficient fuel supply to the engine, decreased engine power, reduced vehicle performance, and lower speed. The function of the diesel fuel filter is to filter out impurities such as iron oxide, dust, harmful particles, and moisture in the diesel fuel, protecting components like the fuel injectors, cylinder liners, and piston rings. It prevents fuel system blockages, reduces wear on engine components, and ensures stable engine operation. The main roles of the diesel fuel filter are: 1. Filtering impurities from the diesel fuel; 2. Preventing fuel injector clogging and maintaining smooth fuel flow. Steps to replace the diesel fuel filter: 1. Close the inlet valve of the filter, unscrew the end cover bolts, and open the end cover; 2. Open the drain valve to completely drain the contaminated fuel; 3. Loosen the tightening nut at the top of the filter and remove the old filter vertically; 4. After replacing the filter, close the drain valve and secure the end cover with bolts.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.