How to Use Audi Cruise Control?

Where is the OBD connector located in the Dongfeng Fengguang 330?

The OBD interface of the Dongfeng Fengguang 330 is located behind the glove compartment on the passenger side. You can access the interface by removing the glove compartment. More related information is as follows: 1. How OBD works: OBD stands for On-Board Diagnostics. This system continuously monitors the engine's operating conditions and the working status of the exhaust after-treatment system. If it detects any condition that might lead to excessive emissions, it will immediately issue a warning. When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. At the same time, the OBD system stores the fault information in memory. Using standard diagnostic tools and the diagnostic interface, the relevant information can be read in the form of fault codes. Based on the fault codes, maintenance personnel can quickly and accurately determine the nature and location of the fault. 2. Functions of OBD: As the communication interface of the vehicle monitoring system, the OBD interface not only reads fault codes for vehicle repair but also provides various operating data of the vehicle. Beyond the data displayed on the vehicle dashboard, the OBD system records more data in the vehicle's computer, including vehicles without a computer display screen. Parameters such as fuel consumption records, battery voltage, air-fuel ratio, throttle opening, and knock counts are all recorded and can be queried in the system. However, due to factors like pricing and configuration, manufacturers may omit the vehicle computer display in lower-end models, preventing users from accessing these useful data. As a result, specialized vehicle computer display products have emerged in the market.

14

2

Share

What is the best engine oil for the Honda Vezel 1.5?

The manufacturer provides two types of engine oil for the Honda Vezel for owners to choose from. One is a 5W-30 mineral oil (blue packaging), with a specification of 4L per barrel. The other is a 5W-40 fully synthetic oil (gold packaging), with a specification of 4.3L per barrel. Below is more relevant information: 1. Introduction to engine oil: For the Honda Vezel 1.5L model, owners can choose the engine oil based on actual usage conditions. The 1.5L model requires approximately 3.6L of oil per change. In real life, some owners discard the remaining oil after maintenance, which is a wasteful practice. As long as the oil has not deteriorated, it can still be used normally within a year. Taking the Vezel as an example, with maintenance every 5,000 kilometers, if used normally, the interval between two maintenance sessions is within a year. Therefore, the remaining oil from the first maintenance can be used normally during the second maintenance as long as it has not deteriorated. This can also save some costs in an intangible way. 2. Introduction to the Vezel: The Vezel is considered a benchmark product among small SUVs, whether in terms of design or other aspects, it is very popular. The Vezel is built on the Honda Fit platform, but its powertrain, level of configuration, and price are significantly higher than those of the Fit. The positioning of the two cars is actually quite different. Although the exterior of the Vezel is not particularly unique, its rounded and stylish dynamic appeal has captured the hearts of many young consumers, who are willing to pay for it.

14

0

Share

What is the fuel consumption of the Volkswagen Viloran?

The combined fuel consumption of the Volkswagen Viloran is 7.6-8.1L/100km. Currently, there are 4 models of the Volkswagen Viloran on sale: the Luxury version and the Business version, with a combined fuel consumption of 7.6L/100km, and the Premium version and the Flagship version, with a combined fuel consumption of 8.1L/100km. The above figures are the NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for combined driving conditions. The actual fuel consumption is higher than these values, ranging from 7.6-12L/100km. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before reaching a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean greater power, requiring more gasoline to burn and perform work. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block temperature is low, the gasoline injected during a cold start does not atomize easily, requiring more gasoline to be injected for combustion, which increases fuel consumption. Additionally, at low temperatures, the engine's computer will control the engine to run at higher RPMs to warm up, which also increases fuel consumption.

1

2

Share

What is the correct method for installing a license plate?

The correct method for installing a license plate is for the car owner to align the plate with the vehicle's mounting points, ensuring it is straight and properly positioned. Check if the position is appropriate and hold it steady with your hand to prevent misalignment. Then, the owner should place the single flat side inward at the mounting point, aligning the central hole, and insert the screw into the hole. Use a flathead screwdriver to secure the screw without tightening it completely, ensuring the screw does not fall out on its own. A license plate, commonly referred to as a vehicle plate, is a panel mounted on the front and rear of a vehicle. It is typically made of materials such as aluminum, sheet metal, plastic, or paper, and displays the vehicle's registration number, registration region, or other relevant information. License plates serve as a means of numbering and recording information for vehicles, primarily enabling identification of the vehicle's region of registration and facilitating access to the owner's details and registration information through the plate number.

17

2

Share

What transmission does the GM6 use?

The 1.5T engine in the GM6 is paired with a conventional 6-speed automatic manual transmission. A transmission is a mechanism used to alter the speed and torque from the engine, capable of fixed or stepped changes in the gear ratio between the output and input shafts. Also known as a gearbox, the transmission consists of a gear transmission mechanism and a control mechanism. When needed, a power take-off can be added. Transmissions are classified in two ways: by the method of gear ratio change and by the type of control. The functions of a transmission are: 1. To change the gear ratio, expanding the range of torque and speed variation of the driving wheels to adapt to constantly changing driving conditions, while allowing the engine to operate under favorable conditions; 2. To enable the vehicle to reverse while maintaining the engine's rotational direction; 3. To use neutral gear to interrupt power transmission, allowing the engine to start, idle, and facilitating gear shifts or power output.

13

1

Share

Why is the GK5 considered a supercar?

GK5 is the third-generation Honda Fit. This car is referred to as a supercar because it boasts the highest horsepower in its class, and its acceleration in stock condition is even faster than the Polo GTI. Additionally, the Fit has immense modification potential, which is why many netizens call it a supercar. Reasons why the GK5 is considered a supercar: 1. Engine: The Fit is equipped with a 1.5-liter naturally aspirated Earth Dreams four-cylinder engine, which produces 131 horsepower and 155 Nm of maximum torque in stock condition. This engine delivers peak torque at 4,600 rpm and maximum power at 6,600 rpm. It features Honda's i-VTEC technology and direct fuel injection. 2. Transmission: The CVT transmission used in the car ensures almost no jerking during gear shifts.

18

1

Share

How to Use Audi Cruise Control?

Where is the OBD connector located in the Dongfeng Fengguang 330?

What is the best engine oil for the Honda Vezel 1.5?

What is the fuel consumption of the Volkswagen Viloran?

What is the correct method for installing a license plate?

What transmission does the GM6 use?

Why is the GK5 considered a supercar?

Can the Auto Start-Stop Function on the Regal Be Turned Off?

What is the normal tire pressure for the Changan Eado Plus?

How to Remove the Radiator of a Nissan Teana?

Where is the fuel tank cap switch for the Volvo S90?