How to Use Air Conditioning Without Fogging Up on Rainy Days?

How to Turn On the Dash Cam in a Lynk & Co Vehicle?

The method to activate the dash cam in a Lynk & Co vehicle: insert the memory card, then press and hold the power button to turn on the dash cam. Different functions can be achieved through various buttons on the dash cam. The dash cam is an external device commonly used in cars to record video and audio during driving. Nowadays, installing a dash cam is primarily for providing evidence in the event of a traffic accident. Taking the Lynk & Co 01 as an example, this vehicle is a compact SUV under the Lynk & Co brand, with dimensions of 4549 mm in length, 1860 mm in width, and 1689 mm in height, and a wheelbase of 2734 mm. In terms of appearance, the Lynk & Co 01 is based on a concept car and adopts the Lynk & Co family design style. The front features a split-type headlight design, with the raised LED daytime running lights on both sides of the front inspired by the Arctic light. The main headlight assembly also uses full LED lighting, integrated with the front grille.

15

0

Share

What to Do If the Tire Pressure Is Too High?

Solutions for excessively high tire pressure: 1. If you are using a pointer-type tire pressure gauge, when you find that the tire pressure is too high, you can directly press the deflation valve while observing the numbers on the gauge to maintain normal tire pressure; 2. If there is no dedicated deflation valve, you can only use a valve core wrench or a fine-pointed object like a pen to press against the valve core, and then slowly release the air. After manually deflating, you should check whether the tire pressure is normal. If it has reached the appropriate range, be sure to remember to install the valve cap tightly to prevent dust and debris from entering the valve core. After inflating, you can apply soap foam to the valve to check for leaks. If there is a leak, continuous small bubbles will appear.

11

5

Share

Why is the car wiper not spraying water?

Reasons why the car wiper is not spraying water: 1. Clogged pipeline; 2. The windshield washer fluid container has too little water or is empty. The correct approach is to open the inlet for refilling windshield washer fluid, then turn on the wiper spray switch. Since both sides are now clear, the air inside the pipe can easily be expelled. Once the air is expelled, the windshield washer fluid in the container will naturally be pushed up. Car wipers, also known as windshield wipers, are devices used to wipe away raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety.

16

2

Share

Can the S gear be used when going downhill?

S gear can be used when going downhill, but it is not recommended to use S gear because these gears will not lock the gear. At this time, the effect of engine braking is very small, and it may upshift causing the vehicle speed to become faster and faster, which poses certain dangers. S gear is the sports mode of the car. Many automatic transmission cars are equipped with S gear, and some high-end models of A-class cars also have S gear design. In S gear sports mode, the transmission can shift freely, but the shift timing is delayed, keeping the engine at high speed for a longer time, allowing the car to travel at low gear and high speed for a longer time, thereby obtaining greater torque output and acceleration. It is usually used when climbing hills and overtaking quickly.

20

2

Share

How to Fold Down the Rear Seats in the Lingpai?

Steps to fold down the rear seats of the Lingpai: First, reach under the seat cushion and forcefully lift the front section upward until the front hooks are released. This action needs to be performed once on both the left and right front sections. After lifting the front section, extend your left hand to the lower side, push the seat cushion toward the backrest with your right hand, and while pushing it in slightly, use your left hand to lift the rear section. This action also needs to be performed once on both the left and right sides, completing the folding of the rear seats. In terms of appearance, the Lingpai adopts the manufacturer's design concept called CoolDragon China Dragon, incorporating a youthful and sporty style while blending in more stable and elegant elements. Regarding body dimensions, the Lingpai measures 4650 mm in length, 1750 mm in width, and 1505 mm in height, with a wheelbase of 2650 mm.

19

2

Share

How to reset the maintenance light on a 2013 Focus?

13 Focus maintenance light reset method: First, press and hold the maintenance button, insert the key until the light comes on, and release the maintenance button after hearing a ding sound; without moving the key, press and hold the minute button next to the instrument panel. If the minute time does not move, it means the reset is complete. The Focus is a Ford A-segment family car with a length, width, and height of 4647 mm, 1810 mm, and 1468 mm respectively, and a wheelbase of 2705 mm. In terms of suspension, the Focus features a McPherson strut front suspension and a torsion beam rear suspension. The car is equipped with keyless entry, one-button start, TPMS tire pressure monitoring, parking radar, and a leather-wrapped steering wheel.

5

Share

How to Use Air Conditioning Without Fogging Up on Rainy Days?

How to Turn On the Dash Cam in a Lynk & Co Vehicle?

What to Do If the Tire Pressure Is Too High?

Why is the car wiper not spraying water?

Can the S gear be used when going downhill?

How to Fold Down the Rear Seats in the Lingpai?

How to reset the maintenance light on a 2013 Focus?

What colors are available for the Kodiaq GT?

What engine is used in the BMW 730?

What does it mean when a Peugeot car indicates a fault?

What Does a Major Vehicle Service Include?