How to Use a Volkswagen Jack?

[VonLawson]

Volkswagen jack usage method is: 1. Open the jack, with the top being the support part and the bottom being the base; 2. Place the base downward, position the support part under the car's chassis, and insert the jack into the gap between the chassis and the ground; 3. Use the wheel bolt wrench as a lever and simply turn it to operate. Volkswagen models include: Lavida, Golf, Santana, Touareg, Bora, and Phideon. Taking the 2021 Volkswagen Phideon as an example, its body structure is a 4-door, 5-seater sedan, with body dimensions of: length 5074mm, width 1893mm, height 1489mm, and a wheelbase of 3009mm.

[DeLuke]

Every time I need to change a tire, I use the Volkswagen car jack that comes with the vehicle. After getting familiar with it, I find it quite handy. First, park the car steadily on a level and hard surface, firmly engage the handbrake, and shift into P or parking gear—this step cannot be taken lightly. Locating the jacking points on the chassis is crucial. Volkswagen vehicles usually have raised metal markers on the chassis behind the front wheels or in front of the rear wheels. Align the jack base steadily with these points. Then, slowly turn the handle clockwise to lift the vehicle—don’t rush. Stop when you hear a slight sound indicating the tire has left the ground. Lifting the car about 5 to 10 cm is enough for changing the tire. Always remember not to work under the car—it’s an unsafe habit. I usually place a safety stand or spare bricks to secure the body. After changing the tire, turn the handle counterclockwise to lower the vehicle, doing it slowly to prevent shaking. I also regularly check the jack’s screw rod, applying some lubricant to prevent rust and ensure it’s ready for next use. The key to the whole process is stability and risk prevention—practice a few times, and you’ll get the hang of it.

[BrookeMarie]

The first time using a jack was quite nerve-wracking, but it became much easier after learning. After parking the Volkswagen on a flat and safe spot, keep the handbrake engaged. Locate those marked points on the chassis, often near the wheels on the metal parts, and carefully position the jack in place. Then, turn the handle to slowly lift the car—take your time, no rush, just enough to slightly lift the tire off the ground. I always worry about safety, so I place a stand or a sturdy object under the car as a backup in case it slips. Stand firmly while operating, and wearing flat shoes helps a lot. After changing the tire, reverse the handle to lower the car while gently rocking it to ensure stability. Don’t leave this tool lying around; clean it and store it in the trunk for emergencies. After a few uses, it becomes effortless, and now I can handle a flat tire on my own.

[MackenzieRose]

Safety first is the top priority. Before using a Volkswagen jack, park on level ground and firmly engage the handbrake. Locate the support points on the vehicle chassis and position the jack correctly. Slowly turn the handle to lift the vehicle, just enough to raise it slightly off the ground. Most importantly, never crawl under the car; always use safety stands for additional protection. Stand steadily to the side and monitor the progress during operation. After completing the replacement, lower the vehicle by turning the handle in the opposite direction slowly. Regular maintenance of the jack ensures it remains in good working condition, safeguarding your travel safety.