How to Use a Volkswagen Dash Cam?

Is the Mustang EC70 a Mid-Size SUV?

The Mustang EC70 is not a mid-size SUV, but a compact SUV and a pure electric SUV model. The maximum power of the Mustang EC70's motor is 110kW, with the motor positioned at the front, making this a front-wheel-drive vehicle. The Mustang EC70 uses a ternary lithium battery, which is lightweight and has a high energy density. It takes only 0.5 hours for fast charging and 7 hours for slow charging, with a pure electric range of 304km as per the MIIT standards. The body dimensions of the Mustang EC70 are 4555mm in length, 1740mm in width, and 1840mm in height, with a wheelbase of 2665mm. The front suspension of the Mustang EC70 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.

15

1

Share

Is Waxing Necessary After Polishing?

It is essential to wax the car after polishing. Waxing is a traditional car care procedure aimed at applying a protective layer over the paint. Polishing can enhance the appearance of the paint to some extent, but excessive polishing can damage the paint, making it too thin. Therefore, waxing is necessary after polishing to provide protection. The benefits of waxing include: Water resistance: Waxing helps repel water and acid rain. The protective layer of wax reduces water droplet adhesion on the car body, minimizing rust caused by rainwater. The waterproofing effect is significant, achieving 50% to 90% effectiveness. Heat resistance: Waxing also protects against high temperatures and UV rays. As the weather gets hotter, cars exposed to sunlight for extended periods can suffer from paint fading and aging. The wax film reflects some of the light, effectively preventing paint deterioration. Additionally, waxing reduces static electricity, minimizing dust attraction from the air, which can affect the car's appearance.

5

0

Share

Which button is the hazard warning flasher in a car?

The hazard warning flasher button in a car is a red triangle symbol. Location: Commonly, the hazard light switch is located on the center console to the right of the steering wheel, although in some models it may be positioned below the center console. Function: The hazard warning flasher, fully known as the 'hazard warning signal light,' is a signal lamp on a vehicle. Its primary purpose is to alert other vehicles and pedestrians that the car is experiencing unusual circumstances, prompting them to yield or avoid in time. The usage of hazard lights can be summarized in one sentence: during driving, if you need other vehicles to slow down or even stop to yield, you typically need to turn on the hazard lights.

4

Share

How to Identify Genuine Leather from Patent Leather?

Patent leather can be identified as genuine leather through aspects such as smell, color, texture, and pores. Below are relevant details: Overview: The primary function of automotive paint is to protect the vehicle body from corrosion. Additionally, automotive paint enhances the vehicle's aesthetic appeal. Automotive paint is a type of coating. The purpose of a spray booth is to provide a clean, safe, and well-lit painting environment for automotive coating operations, ensuring that the spraying process is free from dust interference and guarantees paint quality. Composition: Automotive paint mainly consists of resin, pigments, additives, fillers, curing agents, solvents, etc. Metallic automotive paint typically includes reflective metal flakes (aluminum powder), while pearlescent paint usually contains mica particles.

12

1

Share

Why does the ETC keep falling off?

It is possible that the owner's car has been parked in a place exposed to sunlight for a long time, causing the adhesive tape to lose its stickiness, resulting in the ETC device falling off. Here are some precautions for installing ETC: 1. Installation height: Pay attention to the installation height, which should not be lower than 1.2 meters or higher than 2.5 meters. 2. Installation angle: The installation angle N should be between 30° and 90°, which is the angle between the surface of the electronic tag and the horizontal plane. 3. Avoid obstruction: When installing, avoid the black areas on the windshield and do not install it in a position that blocks the solar battery. 4. Do not remove it casually after installation: Do not remove it casually after installation to avoid the ETC becoming invalid after removal.

6

2

Share

Is a Fuse Blown When the Central Control Screen Doesn't Light Up?

When the central control screen doesn't light up, it may be due to a fuse failure caused by excessive load leading to the fuse blowing. Here is relevant information about fuses: 1. Working principle: The fuse is located under the interior trim panel on the side of the main driver's dashboard. Its working principle utilizes electromagnetic induction where the conductor cuts magnetic field lines to generate potential, converting the prime mover's mechanical energy into electrical output. 2. Composition: A fuse consists of a fusible element (fusible link), electrode parts, and support structure. Fuse types include flat-ended tubular fuses, pointed tubular fuses, knife-blade fuses, screw-type fuses, blade fuses, flat fuses, wrapped fuses, and SMD fuses. Their function is to quickly melt when circuit current exceeds twice the fuse's rated current, thereby protecting the circuit.

9

5

Share

How to Use a Volkswagen Dash Cam?

Is the Mustang EC70 a Mid-Size SUV?

Is Waxing Necessary After Polishing?

Which button is the hazard warning flasher in a car?

How to Identify Genuine Leather from Patent Leather?

Why does the ETC keep falling off?

Is a Fuse Blown When the Central Control Screen Doesn't Light Up?

Are the maintenance costs for hybrid vehicles high?

How much diesel does a 430-horsepower engine consume at idle for one hour?

What is the battery replacement tutorial for the old Mercedes-Benz CL180 key?

Can 98 octane gasoline be mixed with 95 octane gasoline?