How to Use a USB Drive in Cadillac XT4?

2 Answers
RichardLynn
07/24/25 9:11pm
Using a USB drive in the car is very simple. Just insert the USB drive with downloaded songs into the vehicle's USB port. The car's infotainment system will automatically scan and retrieve the music files from the USB drive. Once the infotainment system has retrieved the relevant music files, you can directly play the music from the USB drive.
Was this review help?
9
1
Share
BenjaminAnn
08/10/25 2:34pm
My XT4 has two USB ports in the center console. For USB drives, make sure to use the left one with the small speaker icon. Insert a USB drive with MP3 files and wait about 10 seconds, the infotainment screen will automatically switch to the media page. There's a five-way button on the right side of the steering wheel - you can skip tracks by pushing it up or down. Remember to use USB drives under 32GB formatted in FAT32, as larger capacities might make the system read slower. A little-known tip: Always press the stop button before turning off the engine, otherwise it will replay from the first song when you restart. I've tried storing lossless music, but the system only supports up to FLAC format.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

The car door has a minor scratch, should it be partially or entirely repainted?

The car door has a minor scratch and needs to be entirely repainted; otherwise, there will be color differences. On the same object and plane, even a slight color variation can be very noticeable. Once color differences occur, the paint surface will look like a patch, appearing very unattractive. Therefore, except for the front and rear bumpers, which can be partially repainted, the rest must be repainted as a whole surface. Relevant details are as follows: Standard automotive paint process: The standard automotive paint process includes inspecting the lines, flat (arc) surfaces, gaps of the repaired sheet metal parts, sanding and finishing beveled edges, dust removal, cleaning, masking, applying primer, filling with putty, sanding putty, applying masking paper, spraying intermediate paint, sanding intermediate paint, removing fine dust from the car body, spraying solid color topcoat, spraying base color paint, clear coat spraying, baking, waxing, and polishing. Process requirements: Most automotive repair units in China perform body surface paint repairs using manual single-vehicle operations. To ensure the quality of the body surface paint, automotive spray painting equipment is generally required. Spray painting and baking booths are produced by several manufacturers and come in large, medium, and small sizes. Large ones are suitable for group buses, medium for minibuses and travel vans, and small for cars. When small equipment is unavailable, medium or large ones can be used as substitutes.
18
4
Share

How to Use Cruise Control in the Malibu?

Using the cruise control in the Malibu is as follows: 1. There are three rows of buttons on the left side of the steering wheel, locate and turn on the cruise control. 2. Press the rightmost button, and the white light on the dashboard will illuminate. 3. Then, when driving above 40 km/h, push the middle button downward to activate cruise control, and release the accelerator pedal to maintain the set speed. Below is an introduction to the cruise control system: 1. The cruise control system (CCS), also known as the speed control device or autonomous driving system. 2. Once activated at the driver's desired speed, it automatically maintains the vehicle speed without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. 3. With this system, drivers no longer need to control the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed fluctuations, thereby saving fuel. 4. Currently, cruise control is mainly divided into three categories: Mechanical cable-type cruise control (suitable for vehicles with mechanical cable-type throttle control); Electronic cruise control (suitable for vehicles with electronic throttle control); Electronic intelligent multifunctional cruise control system (suitable for vehicles with electronic throttle control).
16
3
Share

How to Determine the Impact of a Scratched Chassis?

When the car's chassis is scratched by an unknown object and you cannot determine whether it affects driving safety, it is recommended to take the car to a 4S shop or repair shop for inspection. Most repair shops have chassis lifts, and once the vehicle is raised, any scratches or damage to the chassis surface will be immediately visible. If it is just a scratch on the steel plate, applying some paint will suffice; if the pipes are damaged, a thorough inspection and repair are necessary. Here are several methods to prevent chassis scratches: 1. When driving over road pits, depressions, grooves, or other surfaces that are prone to scratching the chassis, slow down and detour if possible. Additionally, pay attention to curbs and speed bumps. 2. Car chassis armor can be sprayed on exposed parts of the vehicle such as the chassis, wheel hubs, fuel tank, lower side panels, and trunk. After drying quickly, it forms a strong and elastic protective layer, which not only prevents impacts from flying stones and gravel but also avoids moisture, acid rain, and salt from corroding the metal parts of the chassis, preventing rust and ensuring driving safety. 3. The engine guard is a customized protective device designed for various car models. Its primary purpose is to prevent mud from covering the engine and to protect the engine from damage caused by uneven road surfaces during driving.
17
0
Share

Why Does the Lower Radiator Hose Keep Coming Off Frequently?

Car radiator lower hose frequently coming off is due to air in the engine. Here are specific explanations about the car radiator: 1. Meaning: The car radiator, also known as the heat exchanger, is a major component in the car's cooling system; its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to dissipate the heat, and then returns to the water jacket to circulate, achieving temperature regulation. It is a component of the car engine. 2. Main purpose: The function of the cooling system is to dissipate excess and useless heat from the engine, ensuring the engine operates at normal temperatures under various speeds or driving conditions.
20
3
Share

What Causes a Car to Emit a Continuous Honking Sound?

Here is a detailed explanation regarding the continuous honking sound from a car: 1. Cause: It is an overspeed alarm, which automatically activates when the vehicle exceeds the calibrated speed limit during driving. 2. Solution: Locate the horn relay, remove it to stop the continuous honking; install a new horn relay. If the honking persists, the horn relay is damaged; if the honking stops, the fault lies in the grounding of the button wire. (The horn button is located on the steering wheel, and many modern vehicles also have airbag generators. It is advisable to seek repair at a service center to avoid potential accidents.)
7
3
Share

How to Tune Car Audio?

Methods for tuning car audio: 1. Click the sound option in the settings menu; 2. Select the equalizer option in the sound effects menu; 3. Choose your preferred playback mode from the list on the right; 4. Click the sound balance option to adjust the sound output position. Car audio systems are installed to alleviate the monotony of travel for drivers and passengers. Initially, car AM radios were used, followed by AM/FM radios, cassette players, and later CD players compatible with DCC and DAT digital audio. Today, car audio systems have reached high standards in sound quality, operation, and shock resistance, ensuring stable performance and perfect sound quality even on bumpy roads.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.