How to Use a Mobile Phone to Locate Your Car

Is the Jiangling Ford Territory a Joint Venture or Domestic Vehicle?

The Jiangling Ford Territory is a joint venture vehicle. Introduction to the Ford Territory: The Ford Territory is a compact SUV jointly produced by Jiangling Group and Ford of the United States. In terms of body dimensions, the vehicle measures 4580mm in length, 1936mm in width, and 1674mm in height, with a wheelbase of 2716mm. The Ford Territory is equipped with a 1.5T turbocharged engine, paired with a CVT continuously variable transmission. For suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension. Introduction to Joint Venture Vehicles: As the name suggests, a joint venture vehicle is a product of a project jointly established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investors contribute brand, technology, capital, talent, etc. Joint venture vehicles are the result of such collaborations. The foreign party provides technology, talent, and brand for domestic assembly, but the core technology remains under foreign control.

15

3

Share

Where is the tire pressure reset button on the Changan Yuexiang?

Changan Yuexiang's tire pressure reset button is located on the control lever to the left of the steering wheel. The operation method is as follows: Step on the car's brake pedal to prepare for starting the engine. Press the car's one-button start button to ignite the engine. All dashboard lights should illuminate, confirming that the vehicle's electronic systems are powered. Inflate all four tires to ensure they have equal tire pressure. Press the tire pressure control button to reset. Tire pressure refers to the air pressure inside the tires, with recommended monitoring values between 2.2 and 2.5 bar. Tire pressure monitoring methods include: direct tire pressure monitoring, indirect tire pressure monitoring, and using intelligent tire monitoring systems.

15

0

Share

Why is the reversing camera not displaying on Volkswagen cars?

Volkswagen reversing camera not displaying may be due to camera damage or obstruction, display screen damage, poor wire contact, and other reasons. How to use Volkswagen reversing camera: The image may display red, yellow, and blue lines. The slightly curved object on the image is the car's bumper; the green line indicates a large distance between the obstacle and the rear of the car, allowing safe reversing; the yellow line indicates a distance of 60cm from the rear of the car, signaling caution; the red line indicates a distance of 30cm from the rear of the car, serving as a warning line. Solutions for reversing camera not displaying: Check if the reversing light is on. If not, the original car fuse may be damaged and needs replacement; check if the control wire of the display screen and the power wire of the camera are loose. If so, try reconnecting and securing them properly.

1

4

Share

What does batch entry of total loss vehicles mean?

Vehicles that have been involved in major accidents with excessively high repair costs, rendering them beyond repair, are assessed as total loss by insurance companies. Additional information: Total loss vehicles: A total loss vehicle refers to an insured vehicle that is completely destroyed or severely damaged to the point where it has no repair value, and the insurance company will classify it as a total loss. Total loss vehicles can be traded with the insurance company's consent, and their disposal methods may include auctions. Most total loss vehicles end up in the used car market. When the insured object is damaged but not completely lost, it can be repaired or recovered, but the cost involved would exceed the value of the salvaged object, making it not worth the effort. In such cases, the insurance company abandons further efforts and compensates the insured with the full insured amount, which is considered a constructive total loss. According to national laws, vehicles that have reached their scrapping age must be scrapped, meaning they are legally prohibited from being driven on the road. Total loss: Refers to situations where actual total loss is unavoidable, or the residual value of the damaged goods, when combined with the costs of rescue, sorting, repair, and continued transportation to the destination, exceeds their value upon arrival at the destination, thus being deemed a total loss.

19

4

Share

How to Test a Camshaft Position Sensor?

To test a camshaft position sensor, follow these steps: 1. Use a multimeter to check the resistance between terminal 1 of the sensor and terminal 62 of the ECU, terminal 2 of the sensor and terminal 76 of the ECU, and terminal 3 of the sensor and terminal 67 of the ECU. 2. While the engine is running, use an oscilloscope to measure the signal waveform between the signal output terminal and the ground terminal of the magnetic camshaft position sensor. 3. Turn off the ignition switch, unplug the sensor's wiring connector, and connect the positive and negative probes of the multimeter to terminals 1 and 3, respectively. Then, turn on the ignition switch to perform the test.

12

4

Share

What is the reason for the abnormal noise when stepping on the brake in D gear of the new Teana?

There is abnormal noise when stepping on the brake in D gear because the ball joint under the gear is severely worn. The function of the ball joint: The ball joint, also known as a universal joint, refers to a mechanical structure that uses a spherical connection to transmit power between different axes. The universal joint is a very important component in a car. The combination of the universal joint and the drive shaft is called the universal joint transmission device. In front-engine rear-wheel-drive vehicles, the universal joint transmission device is installed between the transmission output shaft and the drive axle main reducer input shaft; while front-engine front-wheel-drive vehicles omit the drive shaft, and the universal joint is installed between the front axle half-shaft, which is responsible for both driving and steering, and the wheel. Reasons for ball joint wear: Poor working performance of the release fork shaft and too small clutch travel. Severe wear needs to check the corresponding ball joint movement position, no matter what type of ball joint is severely worn.

16

0

Share

How to Use a Mobile Phone to Locate Your Car

Is the Jiangling Ford Territory a Joint Venture or Domestic Vehicle?

Where is the tire pressure reset button on the Changan Yuexiang?

Why is the reversing camera not displaying on Volkswagen cars?

What does batch entry of total loss vehicles mean?

How to Test a Camshaft Position Sensor?

What is the reason for the abnormal noise when stepping on the brake in D gear of the new Teana?

Where is the USB port in the Pajero?

What material is the Prado body made of?

Is the GAC Trumpchi GS4 equipped with a dual-clutch transmission?

How to Charge a Car Battery with a Charger?