How to Use a Car Wash Foam Cannon

1 Answers
MacLeo
07/29/25 8:05pm
Add car wash soap according to the recommended ratio - first add the soap, then add water. Do not pour car wash soap directly into the high-pressure foam cannon, as this may result in too high concentration causing excessive foam that's difficult to rinse off, leading to poor cleaning results.
Was this review help?
10
5
Share
More Forum Discussions

How to Clear the Maintenance Reminder for VV7?

VV7's maintenance reminder cannot be cleared manually; it can only be reset by connecting professional equipment to the vehicle's computer. After maintenance at a 4S dealership, professional technicians will use specialized equipment to clear the reminder. Here are some details about the first maintenance for VV7: 1. The first maintenance for VV7 is required at 5,000 kilometers, followed by maintenance every 7,500 kilometers. Both the first and second maintenance services are free. If maintenance is not performed at a 4S dealership, be sure to record the mileage at the time of maintenance to avoid significant deviations in the maintenance cycle, which could affect the vehicle's overall performance. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 3. The purpose of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life.
5
2
Share

What brand of engine does GAC Trumpchi use?

GAC Trumpchi's engines are produced in-house by GAC Group and independently developed in China. The first batch of Trumpchi engines were imported from Italy, while subsequent ones were manufactured at GAC's engine plant. After domestic production, direct injection and dual spark plugs were eliminated, but the high-speed performance remains excellent. Featuring advanced designs like variable intake valves, variable intake manifolds, and dual four-door springs, these engines deliver rapid and agile response. The Trumpchi engine originates from Alfa Romeo's 2.0L dual spark plug engine, which has been continuously improved and developed into GAC Trumpchi's current engine. The Trumpchi series is one of GAC Group's mid-to-high-end sedan lines. Due to GAC's collaboration with Fiat, the prototype for Trumpchi vehicles was based on the Alfa Romeo 166. Consequently, Trumpchi cars retain traces of Italian design in their chassis and suspension systems. These vehicles exhibit strong handling and comfort characteristics. The front suspension employs MacPherson struts, while the rear uses a multi-link independent suspension to enhance road-holding capability and grip, thereby improving both handling and safety.
7
2
Share

What Causes the Noise from the Right Front Wheel?

This situation may occur due to damage to the suspension control arm of the right front wheel or the shock absorber of the right front wheel. It could also be caused by damage to the buffer rubber of the right front wheel's shock absorber. After encountering this issue, it is recommended to take the car to a 4S shop or a professional repair shop to lift the vehicle and inspect the chassis. Here are some relevant introductions: 1. The suspension is an important component of a car, serving to connect the wheels to the body. Without the suspension, the car cannot operate normally. The suspension consists of many control arms, and if these control arms age or their bushings are damaged, the car may produce noise when driving over bumpy roads. 2. The areas where the car's shock absorbers connect to the body have buffer rubbers. Rubber products can age over time with prolonged use. If the rubber hardens due to aging, the hardened buffer rubber can also cause the car to produce noise when driving over bumpy roads.
4
1
Share

Why is the brake light of Fengguang 580 always on?

The reasons why the car brake light is always on are as follows: 1. Lack of brake fluid: Brake fluid is an indispensable part of the car braking system. When the driver steps on the brake pedal, the force from the pedal is transmitted by the piston of the master cylinder through the brake fluid to the brake cylinders located at each wheel, causing the brake pads to contact the wheels and achieve the purpose of stopping the vehicle. 2. Tail light bulb damage: The brake fluid reservoir has upper and lower lines. When the brake fluid inside is below the lower line, this phenomenon is detected by the sensor next to the reservoir and reflected by the brake light on the dashboard. If the brake fluid decreases rapidly, it indicates a leak in the braking system. 3. Severe wear of brake pads: If the brake pads are severely worn, the light will stay on, and the brake pads need to be replaced. Related information about car brake lights is as follows: 1. By position: Car brake lights can be divided into rear brake lights, brake indicator lights, and high-mounted brake lights. 2. By material: Car brake lights can be divided into gas car brake lights and LED car brake lights.
20
5
Share

What are the differences between Honda's hybrid technology and Toyota's hybrid technology?

Honda's hybrid technology and Toyota's hybrid technology are both very advanced and representative hybrid systems. The differences between them are as follows: 1. Different manifestations and advantageous areas. Honda's system mainly manifests as parallel hybrid and engine direct drive, while Toyota's system primarily manifests as a series-parallel hybrid. Both have their own advantageous areas: Honda excels in efficient charging under extreme traffic congestion and direct engine drive during high-speed conditions, avoiding excessive energy conversion. Toyota's advantage lies in highly simplified and optimized mechanics and a broader, more stable range of series-parallel hybrid driving modes. 2. Different fuel consumption performance and manufacturing costs. In terms of vehicle performance, Honda's hybrid system has a slight advantage in fuel consumption compared to Toyota's hybrid system of the same period, but the difference is not significant. The downside is higher costs and a lack of long-term quality validation. Toyota's advantage is its nearly 20 years of accumulated mature system experience and lower costs due to large-scale production. 3. Different market reception and popularity. Consumers tend to favor Toyota's hybrid models more, and Toyota's hybrid vehicles also occupy a larger market share.
15
5
Share

What is the recommended oil specification for Kia K5?

The original factory oil brand for Kia K5 is Shell HX7. If you want to change the oil during later maintenance, you can choose brands such as Mobil, Castrol, or Total. The oil specifications recommended in the official Kia K5 manual are 5W-30 and 5W-40. Any oil model that meets these two specification parameters can be used. The viscosity of engine oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, where 5W represents the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, resulting in smoother cold starts for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better the oil can maintain its viscosity index at high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Kia K5 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add the new oil through the oil filler cap on the engine valve cover, generally filling about three-quarters of the oil container; Start the engine and let it run for 5 minutes, checking for oil leaks around the drain plug and oil filter. If any leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.