How to Use a Car Spare Tire for Beginners

What tires are suitable for Haval H7?

Haval H7 is equipped with Kumho tires in size 235/55R18. Tires are one of the most important components of a vehicle, serving to support the entire weight of the car, bear the vehicle's load, transmit forces and moments in various directions, and deliver traction and braking torque to enhance the car's power performance, braking capability, and off-road capacity. Precautions for replacing Haval H7 tires are as follows: 1. Choose the appropriate tires The specifications of the new tires must match those of the original tires and be identical to the other tire on the same axle. For example: speed rating, load index, tread pattern, brand, size, etc., to ensure safe driving. 2. Replace the valve stem as well: When replacing tires, the aging cycle of the new tires and the old valve stems may differ. During the lifespan of the new tires, the valve stems might develop issues, which are not easily noticeable. Therefore, it is advisable to replace the valve stems at the same time as the tires.

17

0

Share

Does the Toyota Crown differential oil need to be replaced?

The Crown differential oil should be replaced every 60,000 kilometers. The function of the differential is to meet the requirement of different wheel speeds when the car turns. The car differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. It is mainly composed of left and right half-shaft gears, two planetary gears, and a gear carrier. The steps for replacing the car differential oil are as follows: 1. First, lift the car and place a large container underneath to catch the waste oil. Use an appropriate screwdriver to remove the inner and outer casings of the transmission. Some transmission oil will flow out at this time, so be careful to avoid it. 2. When most of the oil has drained, remove the last oil pan, being careful to support it by hand as there is still a large amount of waste oil inside. 3. Remove the oil pan gasket and clean the surrounding area. If the gaps are not clean enough, use a tool with cotton thread to wipe all the cleaned transmission oil filter components, then install them one by one. 4. Wipe the surface of the replacement parts clean, ensuring there are no water or oil stains, as these can cause leaks. Install the cleaned oil pan and gasket together and add the original manufacturer's oil. Check the oil level through the filling observation hole. If the oil is full, it will flow out from the observation hole.

13

0

Share

How Long Does an Audi A3 Battery Typically Last?

Audi A3 battery replacement time mainly depends on the owner's driving habits and usage environment. The specific details are as follows: 1. Under normal circumstances, the lifespan of an Audi A3 battery is 3 to 4 years. 2. Some car batteries can last 5 to 6 years. 3. If the user installs additional electrical devices without authorization, it can reduce the battery's lifespan. For example, subwoofers can cause excessive use of the Audi battery, shortening its lifespan. Below are detailed methods for maintaining an Audi A3 battery: 1. Avoid parking the car in an open-air parking lot for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. 2. In winter, the car engine is harder to start. Each attempt to start the car should not exceed 5 seconds, with intervals of at least 15 seconds between attempts. If the car fails to start after multiple attempts, check other aspects such as the circuit, ignition coil, or fuel system. Avoid continuous, uninterrupted starting attempts, as this can cause the battery to over-discharge and burn out. 3. The car battery should be charged regularly. If left unused for a long time, the battery will gradually self-discharge and eventually become unusable. Therefore, start the car periodically to charge the battery. 4. Clean the battery terminals periodically and apply specialized grease to protect the wiring harness. Regularly inspect the battery's accessories and connecting wires. 5. Avoid using car electrical devices after the engine is turned off. Using the battery alone when the engine is not generating power can cause damage.

16

0

Share

How is the 6-year exemption from inspection calculated?

Six-year exemption from inspection is calculated from the month of motor vehicle registration. According to the vehicle license, the exempted vehicle must meet the following conditions simultaneously: non-operational use nature: 1. Approved passenger capacity: 6 persons or less; 2. Nine types of vehicles specified on the license: micro sedan, small sedan, medium sedan, large sedan, small ordinary passenger car, small off-road passenger car, small special passenger car, micro ordinary passenger car, micro off-road passenger car. The 6-year exemption from inspection is based on the vehicle's registration date. Here are the relevant details: 1. Non-operational small private passenger vehicles with 7 seats or less (including 7 seats) are exempt from inspection for 6 years, meaning the vehicle is exempt from on-site inspection, but the car owner still needs to apply for an inspection compliance mark at the designated period (usually every 2 years) at the vehicle management office, vehicle registration service store, or traffic police squadron, and post it on the upper right corner of the vehicle's front windshield. 2. The 6-year exemption from inspection policy for non-operational vehicles has been in trial implementation since September 1, 2014. 5-seat vehicles enjoy the initial 6-year exemption from inspection policy. Although exempt from on-site inspection for 6 years, they need to apply for an annual inspection mark every 2 years. The prerequisite for exemption is that the vehicle has not been involved in any major traffic accidents during this period. If an accident occurs, the vehicle must undergo on-site annual inspection.

12

2

Share

What Causes Abnormal Noise from Front Wheels on Uneven Roads?

Abnormal noise from the front wheels when driving on uneven roads is mainly due to faults in the car's chassis. The specific reasons include the following 4 points: 1. Damping rubber aging: The connection points between the shock absorber and the car body are cushioned with rubber, which hardens and ages over time; when this hardened rubber is compressed, it produces abnormal noise. 2. Excessive play in the suspension arm ball joint: If the lower suspension arm ball joint becomes loose with excessive play, abnormal noise will occur when the car bumps. 3. Aging plastic components: The anti-roll bar bushings become loose with excessive play. 4. Damaged shock absorber: If the car is used in poor conditions or subjected to aggressive driving, the shock absorber may inevitably become damaged or start leaking oil.

7

3

Share

How to Identify China 5 and China 6 Emission Standards?

If it's a new car, you can check the vehicle's factory certificate or the environmental standard list. Below is relevant knowledge about identifying China 5 and China 6 standards: 1. Check the relevant content on the certificate: The vehicle's certificate contains many key pieces of information, including the emission standard, which will clearly indicate the national emission standard the vehicle complies with. For example, a China 5 vehicle will be labeled as "GB18352.5-2013 China V." Therefore, checking the certificate is a very effective method to determine whether the car you intend to purchase is China 5 or China 6. 2. Review the environmental information list included with the vehicle: When purchasing a car through official channels, the provided documentation will include an environmental information list. In the first section related to vehicle information, there will be an item for the emission stage, which will clearly and concisely indicate whether the model is China 5 or China 6. 3. Query through specialized websites: After identifying the model you intend to purchase, you can find specific vehicle identification numbers in the relevant documents, such as the engine number and chassis number. Then, by visiting the Motor Vehicle Environmental Protection Website and entering these numbers, you can query the vehicle's environmental information, including the emission standard it complies with. 4. Carefully verify the vehicle conformity certificate: During the vehicle delivery process, the dealer will provide the vehicle's conformity certificate. You can carefully check the relevant content, which includes an item named "Exhaust Emissions," detailing the specific national standard number referenced during certification. The standard number and corresponding year will indicate whether it is China 5 or China 6.

5

4

Share

How to Use a Car Spare Tire for Beginners

What tires are suitable for Haval H7?

Does the Toyota Crown differential oil need to be replaced?

How Long Does an Audi A3 Battery Typically Last?

How is the 6-year exemption from inspection calculated?

What Causes Abnormal Noise from Front Wheels on Uneven Roads?

How to Identify China 5 and China 6 Emission Standards?

Where is the blower resistor located in the Sylphy?

Is there a charge for the first maintenance of a new car?

In which year was the China IV diesel standard implemented?

Where is the electronic handbrake for the Mercedes-Benz column shifter?