How to Upgrade the Navigation System in Tiggo 7?

Where are the accelerator and brake located in a car?

Automatic transmission models distinguish between the accelerator and brake: the brake is on the far left, and the accelerator is on the far right. For manual transmission vehicles, the clutch is on the left, the brake is in the middle, and the accelerator is on the right. More relevant information is as follows: 1. The brake and accelerator pedals are placed at the front of the right foot: there is a certain gap between them, and the brake pedal is slightly higher than the accelerator pedal. This design is for the driver's quick response. The correct way to operate is to rotate left and right with the heel of the right foot as the axis and use the sole of the foot to press the pedals. 2. Manual transmission models: the driver's two legs need to control three pedals, and the brake and accelerator generally cannot be pressed at the same time. If the brake and accelerator pedals are pressed simultaneously due to misoperation, the vehicle's computer ECU will default to the principle of brake priority due to the intervention of the electronic system. Therefore, the left foot controls the clutch, and the right foot controls the brake and accelerator, which is the most scientific design.

7

3

Share

What does outslde mean?

outslde indicates that the tire has a specific direction and cannot be installed randomly. It specifies the installation direction of the tire, serving as a directional indicator for unidirectional and mixed tread pattern tires. Below is relevant information about tires: 1. Shelf life: Since car tires are made of rubber, they have a certain shelf life. However, unlike food products, they do not have an explicitly labeled expiration date because the shelf life is highly dependent on actual usage conditions. If the driver does not have poor driving habits such as sudden braking, abrupt stops, or sharp turns, the shelf life of car tires is generally 3-5 years. 2. The newer the tire, the better its performance: Tires with more recent production dates have better performance and a longer shelf life, while tires with older production dates have poorer performance and a shorter shelf life. It is best to purchase tires with a production date within one year. Tires with a shelf life exceeding 3 years should not be purchased, as they have already begun to age, leading to a significant decline in performance and posing safety hazards if continued to be used.

15

5

Share

What are the methods for rust removal on sedans?

Here are the methods for rust removal on sedans: 1. Manual rust removal: This is the simplest method, mainly using hand tools such as scrapers, sandpaper, wire brushes, hammers, and chisels. It involves manual grinding, brushing, scraping, and knocking to remove rust. 2. Mechanical rust removal: This method utilizes the impact and friction generated by machinery to remove rust from the surface of the workpiece. It is characterized by high efficiency, good quality, and reduced labor intensity. Commonly used machinery includes pneumatic brushes, pneumatic guns, pneumatic grinders, electric brushes, electric grinders, electric rust removers, and electric hammers. 3. Spray rust removal: Spray rust removal includes methods such as shot blasting, dry sandblasting, wet sandblasting, and high-pressure water. Among these, wet sandblasting is particularly effective and widely used in the automotive repair industry.

13

1

Share

Is a tire pressure of 280kpa normal?

Tire pressure of 280kpa is normal. Tire pressure refers to the air pressure inside the tire, and the level of tire pressure plays a significant role in a car's performance and power. Methods for checking tire pressure include: 1. Using instruments to measure tire pressure; 2. Visual inspection method; 3. Consulting 4S shop staff. The effects of excessively high or low tire pressure are: 1. Excessively high tire pressure: increases friction between the tire and the ground, reduces tire adhesion, affects braking performance and driving comfort, accelerates wear on the central tread of the tire, shortens tire lifespan, increases body vibration, speeds up tire aging, reduces wear resistance, and increases the risk of tire blowouts; 2. Excessively low tire pressure: increases the contact area between the tire and the ground, makes the steering wheel heavier, affects driving, causes the tire to overheat, increases the risk of blowouts, enlarges the tire body, leads to cracks on the inner and outer sides of the tire, accelerates rubber aging, and speeds up tire wear.

6

5

Share

What to Do When Only 1 Point Remains on Your Driver's License?

A full 12-point deduction in a single scoring cycle will result in the temporary confiscation of your driver's license by traffic police. The license will be returned only after completing required study sessions and passing exams. If you already have 11 points deducted and commit another traffic violation, reaching the 12-point threshold, the traffic police will impound your license. You must report within 15 days for processing, which includes mandatory study and testing. Currently, many regions offer point reduction programs through the "Traffic Management 12123" app. When your points haven't reached 12, you can reduce points by studying and passing exams, with a maximum reduction of 6 points per scoring cycle. Below is an introduction to the C1 driver's license: 1. C1 is the most commonly used license in China. 2. Vehicles not permitted with C1 license: urban buses, medium or large passenger vehicles, large trucks, two-wheeled or three-wheeled motorcycles. 3. Vehicles permitted with C1 license: C1 license holders can drive vehicles classified as C2, C3, and C4 models.

7

0

Share

Is it okay if there is a little water in the engine oil?

Under no circumstances should water be added to engine oil. The relevant information about water entering engine oil is as follows: 1. Water in engine oil: It will cause the oil to deteriorate and change its original properties, preventing it from performing its functions such as lubrication, cooling, sealing, and corrosion prevention, ultimately damaging the engine. 2. Engine water ingress: Once water enters a car engine, at best, the spark plugs may fail to ignite or the engine may stall directly; at worst, it can lead to hydro-lock. 3. Specific situations of engine water ingress: If the engine only has mixed water vapor entering through the air filter, simple treatment is sufficient—cleaning the water vapor from the air filter, throttle valve, and cylinder. If a significant amount of water enters the engine but does not affect normal driving, though the engine noise is louder, it may indicate a small amount of water in the engine oil or gasoline, requiring an oil change and cleaning of related engine components. If a large amount of water enters and the engine has been submerged (not just mixed with water), but the car has not been started and the engine is not damaged, the water must be completely drained, the interior cleaned thoroughly, reassembled, and the engine oil replaced.

14

0

Share

How to Upgrade the Navigation System in Tiggo 7?

Where are the accelerator and brake located in a car?

What does outslde mean?

What are the methods for rust removal on sedans?

Is a tire pressure of 280kpa normal?

What to Do When Only 1 Point Remains on Your Driver's License?

Is it okay if there is a little water in the engine oil?

Whose name should be on the car loan vehicle license?

Does a newly replaced car battery need to be charged?

How many kilometers can an Accord travel on a full tank of gas?

How to Change Lanes Before an Intersection While Driving?