How to upgrade from C1 to D license?

1 Answers
EstherFitz
07/30/25 5:53am
The process of upgrading from C1 to D license is: 1. Submit an upgrade application at the local vehicle management office; 2. After the application is approved, undergo a medical examination at a hospital; 3. After the medical examination, bring the medical report, ID card, and application form to the vehicle management office for review; 4. After the review is passed, the test will be arranged. To upgrade from C1 to D license, you must have held the C1 license for at least one year, and must not have accumulated 12 penalty points in the previous scoring cycle. The C1 driver's license is a type of driver's license code, which allows driving small and micro passenger cars, light and micro trucks, and light, small, and micro special operation vehicles.
Was this review help?
11
5
Share
More Forum Discussions

How to Manually Reset the Tire Pressure on Roewe ei6?

Press and hold the reset button until the low tire pressure warning light turns off, then press and hold the reset button again until the low tire pressure warning light flashes three times and turns off. The tire pressure warning light indicates that the tire pressure of the four tires is not within the normal range, usually caused by slow air leakage or a puncture leading to insufficient tire pressure.
9
1
Share

How to Set the Sunroof Initialization Function for Ford Edge?

Hold the switch in the closed position for 25-30 seconds until the sunroof opens to its maximum, and the glass will shake slightly. Then release and press the switch again. At this point, the sunroof will perform an automatic cycle of lowering, opening, and closing, indicating that the sunroof initialization is complete. If the initialization fails due to incorrect operation and the sunroof does not move, first turn off the car key and wait for 10 seconds, then repeat the above steps.
1
2
Share

How to Manually Reset the Oil Life on an Iveco Vehicle?

Turn the ignition switch to the "OFF" position. Use the trip odometer reset button to display "——" in the odometer for the warning cycle. Press and hold the trip odometer reset button for 1.2 seconds or longer, and the maintenance reminder light will flash, changing to the next service mileage.
18
5
Share

What is the anti-theft matching method for the Great Wall H6 using 431?

Select the Delphi Body Control System under the Body Control System, and choose to read the fault codes, which display 4 faults. It indicates that the tire pressure sensors for the front left, front right, rear left, and rear right tires have not been learned. Select the tire pressure sensor learning option. It prompts to wait for 60 seconds. When the activation is successful, there will be a 'beep' sound, and the X431 diagnostic software will also indicate a successful activation.
19
4
Share

Where is the rear tow hook located on the Buick Excelle?

The rear tow hook on the Buick Excelle is located in the tool compartment under the spare tire in the luggage trunk. Below are the correct usage methods for tow hooks and tow ropes: Locate the tow hook positions on the towing vehicle and the towed vehicle: The tow hook positions on many vehicles are designed at the lower part of the bumper. Generally, the exact location is marked in the vehicle's user manual. The driver can find a hidden space by inspecting the front and rear bumpers, where a circular or square cover is located—this is the position of the vehicle's tow hook. Some vehicles have split-type tow hooks that require assembly before use. After removing the cover on the bumper, assemble the tow hook provided with the vehicle. Install the towing equipment: Whether using soft or hard towing equipment, ensure that the connection to the vehicle's tow hook is secure and reliable during installation. If the tow hook has a safety lock, make sure it is properly engaged. Before starting to tow, check the front and rear connections again. For soft tow ropes without tow hooks at both ends, use a slip knot when tying. A tight knot may become difficult to untie after being subjected to strong pulling forces. Towing vehicle should start in 1st gear: At the same time, the towing vehicle needs to control its speed and maintain smooth driving. Increase power output when slight resistance is felt. For manual transmission models, avoid abruptly releasing the clutch pedal; instead, use the semi-clutch method for a slow start to prevent damage to the vehicle.
20
4
Share

How to Reset the Maintenance Light on Changan Uni-T?

Changan Uni-T's maintenance light reset button is located on the steering wheel, and manual reset can be achieved through specific operations. Manual Reset Method: Press and hold the reset button "A", while stepping on the brake pedal, then turn the ignition switch to "on" without starting the car. When the characters "INSP" flash or the display screen blinks, continue holding the reset button "A" until "..." appears on the display. Release the reset button "A" and the brake pedal. Finally, turn the ignition switch back to the "Off" position. The reset process is now complete. Function of the Maintenance Light: It records the mileage of some important components, serving as a reminder for car owners and maintenance personnel.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.