How to Upgrade from C1 to A2 Driver's License?

1 Answers
MayaAnn
07/30/25 1:00am
A2 driver's license cannot be obtained directly through application; it can only be acquired through license upgrading. The conditions for upgrading are as follows: The applicant must hold a C license for more than three years and must not have accumulated 12 penalty points in the previous two cycles, or hold an A3 or B2 license for more than one year and must not have accumulated 12 penalty points in the previous cycle, to upgrade to a B1 license. After holding a B1 license for more than three years and not accumulating 12 penalty points in the previous two cycles, or holding an A1 license for more than one year and not accumulating 12 penalty points in the previous cycle, one can upgrade to an A2 license. Physical requirements for upgrading to B1: Age: 21 to 50 years old; Height: 150 cm or taller; Vision: Naked or corrected vision must reach 5.0 or above on the logarithmic visual acuity chart; Hearing: Able to distinguish the direction of sound with each ear at 50 cm from the tuning fork; Upper limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement function; Lower limbs: Both lower limbs must be intact with normal movement function, and the length difference must not exceed 5 cm. C1 Driver's License: The C1 driver's license is one of the codes for motor vehicle driving licenses. The C1 license allows driving small and micro passenger vehicles, light and micro cargo vehicles, and light, small, and micro special-purpose vehicles; small passenger vehicles with seating capacity of 9 or fewer. Age requirements: The minimum age for a C1 license is 18 years old, with no upper age limit. However, applicants aged 70 or older must pass tests for memory, judgment, and reaction abilities.
Was this review help?
13
0
Share
More Forum Discussions

What Causes Belt Squeaking After a Car Goes Through Water?

This is caused by the belt slipping when it gets wet. Below is relevant information about car belts: Installation Location: In automotive applications, they are primarily installed between the car engine's crankshaft and components such as the camshaft, water pump, generator, air conditioning compressor, and power steering pump. Function: The engine drives various auxiliary mechanisms via belt transmission, including the air conditioning compressor, power steering pump, and alternator. If the belt slips or breaks, the related auxiliary mechanisms will fail to operate normally, affecting the car's regular use. Therefore, it is essential to inspect the drive belt regularly.
2
2
Share

Can the vehicle be started while charging?

Vehicle can be started while charging. The method for charging the vehicle is: 1. Turn off the engine; 2. Take out one positive and one negative jumper cable; 3. Remove the buckle to open the battery protective cover, exposing the battery terminals; 4. Connect one end of a jumper cable to the positive terminal of the dead battery and the other end to the positive terminal of the live battery; 5. Take another jumper cable, first connect it to the negative terminal of the live battery, then connect the other end to the engine block or body of the dead vehicle, remembering to connect negative to negative; 6. Start the live vehicle. The steps for starting the vehicle are: 1. Turn the key to the ON position and pause to wait; 2. After the dashboard icons stop flashing, turn to the START position to ignite.
7
2
Share

Where is the USB port located in the old Honda Fit?

The USB port of the Honda Fit is located next to the multimedia display. Below is the relevant information: Configuration: The Honda Fit is equipped with two sets of ISOFIX child seat interfaces. The ISOFIX interface is located under the backrest of the rear seats, with small circular plastic labels on the seats. The metal hooks hidden between the horizontal and vertical cushions are the ISO-FIX interfaces, greatly enhancing child safety. Many domestic child car seat brands are equipped with this interface, such as the Anbaobao child car seat. A child car seat is specifically designed for children of different weights (or age groups) and is installed inside the car.
3
1
Share

What is the Difference Between Non-independent Suspension and Independent Suspension?

The differences between non-independent suspension and independent suspension are: 1. Different structures: Non-independent suspension connects both wheels with an integrated frame, and the wheels along with the axle are suspended under the frame or body via an elastic suspension system; Independent suspension suspends each wheel individually under the frame or body via an elastic suspension system. 2. Different emphases: Non-independent suspension focuses on high strength; Independent suspension emphasizes comfort. 3. Different applications: Commonly used non-independent suspensions include torsion beam non-independent suspension, trailing arm non-independent suspension, and leaf spring non-independent suspension; Independent suspensions mainly include MacPherson strut, double wishbone, multi-link, and link pillar types.
18
1
Share

Why can't I play music via Bluetooth in an older BMW model?

Older BMW models cannot play music via Bluetooth because they haven't entered the audio mode. Here's the relevant information: Brand Introduction: BMW (Bavarian Motor Works), fully known in Chinese as Bayerische Motoren Werke AG, is a German luxury automobile brand. BMW's vehicle series include four categories: i, X, Z, and pure numeric models (1, 2, 3, 4, 5, 6, 7, 8 series), along with the M series (BMW's official high-performance modification division) which is based on improvements to these series. Founded in 1916 and headquartered in Munich, Bavaria, Germany, BMW's blue-and-white logo represents the colors of the Bavarian state flag where the company is based.
4
2
Share

What's the difference between 1.5t and 2.0t? Which is more fuel-efficient?

The differences between 1.5t and 2.0t engines are as follows: 1. Different displacement: The 1.5t engine has a displacement of 1.5 liters; the 2.0t engine has a displacement of 2.0 liters. 2. Different power output: The 2.0t engine delivers stronger power than the 1.5t. 3. Different pricing: Under the same brand, the 2.0t model is priced higher than the 1.5t. 4. Different fuel consumption: Compared to the 2.0t engine, the 1.5t engine has a smaller displacement, resulting in better fuel economy and higher fuel efficiency.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.