How to Update the Quota Process?

How to Make Scratched Car Glass Clear Again?

Only professional glass polishing tools, polishing compound, and skilled technicians can achieve this. Here are some related methods: 1. Cross-ventilation: Open both side windows slightly to allow air circulation inside the car. When the interior temperature matches the exterior temperature, the fog will dissipate. 2. Air conditioning defogging: Press the A/C button (which stands for air conditioning cooling), lower the temperature setting, activate the window defogging function, and set the fan speed to maximum. This rapidly cools the glass surface through water evaporation, effectively removing fog. 3. Anti-fog spray: The principle involves spraying a protective coating on the windshield to create an effective protective film.

8

0

Share

After how many hours should factory vehicles undergo first-level maintenance?

Factory vehicles should undergo first-level maintenance after 50 hours of operation. Generally, vehicles require maintenance every 5,000 to 10,000 kilometers. Below are the relevant details: 1. Vehicle maintenance items: Typically include oil change, oil filter replacement, checking and topping up the auxiliary tank water level, checking and replenishing the windshield washer fluid, inspecting and adjusting tire pressure, and cleaning the engine. 2. Purpose of vehicle maintenance: To maintain a clean and tidy vehicle appearance, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life. 3. Factors determining maintenance duration: The duration depends on the number of maintenance items and whether the workshop has available service bays. Owners can call in advance to make an appointment.

8

5

Share

How to Use the Air Conditioning in the 2021 Honda CR-V?

2021 Honda CR-V air conditioning usage instructions are as follows: 1. Defogging: The front and rear windshield have corresponding buttons; simply press the relevant button to achieve the defogging effect. 2. Warm Air: Turn the knob to increase the temperature to activate warm air. When heating, the A/C button should be turned off because the compressor only operates during the cooling phase. Heating is achieved through the engine's coolant and the heat from the windshield heating wires. 3. AUTO: The AUTO function relieves the driver's workload by enabling fully automatic control of the air conditioning. The system determines via sensor signals whether to increase/decrease the fan speed and whether cooling or heating is required at the moment.

2

4

Share

What is the fuel tank capacity of the GL8?

The fuel tank capacity of the GL8 is 66 liters. Below are the detailed specifications of the Buick GL8: 1. Vehicle Positioning: The Buick GL8 is a mid-to-high-end MPV launched by SAIC-GM Buick. 2. Powertrain: It is equipped with a 2.0T SIDI direct-injection turbocharged engine, which delivers a maximum power of 191 kW and a peak torque of 350 N·m. The engine is paired with a 6-speed automatic transmission. During operation, the engine reaches its maximum power output at 5,400 rpm and achieves peak torque between 2,000 and 5,000 rpm.

18

2

Share

What are the drawbacks of car door sill guards?

Aftermarket-installed door sill guards are prone to friction with the car door. Moreover, since the sill guards are attached with strong adhesive, they may start to peel off after some time. Here are some related points: 1. Paint scratches: If the vehicle is an SUV and there are children or elderly people in the family, they often step on the car sill when getting in and out of the car, which can cause scratches on the car's paint over time. Installing sill guards can effectively prevent this issue. 2. Peeling off: If the sill guards frequently peel off, it is likely due to negligence during installation. Before installing the sill guards, the sill area must be thoroughly cleaned, and the paint surface must be kept dry and clean. After applying the adhesive, pressure should be applied to ensure full contact with the adhesive surface. A hair dryer can also be used to heat the adhesive to ensure complete bonding.

8

1

Share

Will the car stall when braking to 20 mph in 4th gear?

Generally, it will not stall, but if the car is braked and still half-clutched, it will stall. In any gear (except neutral), if the car is completely stopped without pressing the clutch, it will stall. Here is the relevant information: 1. For manual transmission cars when the gear is in 1st to 5th gear: If the clutch is not pressed and the speed starts to slow down, the car will stall when the speed slows down to a certain extent. Additionally, water in the exhaust pipe, engine failure, or running out of fuel can also cause stalling. 2. If the gear is still engaged: Stalling due to not pressing the clutch is damaging to the car itself. Forcing the gear without fully pressing the clutch can also cause stalling and may lead to broken gear teeth, which can result in frequent gear disengagement in the future.

10

1

Share

How to Update the Quota Process?

How to Make Scratched Car Glass Clear Again?

After how many hours should factory vehicles undergo first-level maintenance?

How to Use the Air Conditioning in the 2021 Honda CR-V?

What is the fuel tank capacity of the GL8?

What are the drawbacks of car door sill guards?

Will the car stall when braking to 20 mph in 4th gear?

What happens if the retarder is always on?

What brand is Extra tire?

What is the normal tire pressure for a BMW 530?

What is the difference between VARTA Blue and Black labels?