How to Unscrew Rusty License Plate Bolts?

1 Answers
DeJason
07/30/25 8:30am
Methods to unscrew rusty license plate bolts: 1. Use a rust remover to clean the threads, then try to unscrew it; 2. Prepare a flathead screwdriver and a Phillips screwdriver, each equipped with an angle grinder. Connect the angle grinder to the power source, plug it in, then hold the grinder's handle with both hands. Use your right hand to turn on the angle grinder's switch, and cut a straight slot on the license plate bolt cap with the angle grinder to remove it. For car owners without an angle grinder, you can try using needle-nose pliers or duckbill pliers to firmly grip the bolt ring. Once the bolt ring is deformed, release the pliers, then insert a flathead screwdriver into the deformed area and use inertia to remove the bolt cap. After removing the license plate bolts, be sure to clean up the bolts promptly and avoid littering, as they could potentially puncture the vehicle's tires.
Was this review help?
18
0
Share
More Forum Discussions

What's the reason for the car screen not lighting up?

The main reasons for the car screen not lighting up are as follows: 1. Poor line contact. It is necessary to check whether there is a loose connection in the line in time. 2. The power signal line is aging. You can try to replace it with a new one. 3. The screen has been used for too long, causing the power supply module to malfunction. Not only will there be lag, but in severe cases, a black screen will appear. Extended content: The car display screen not only provides information such as navigation, reversing images, and vehicle fuel consumption for viewing, but also has many multimedia entertainment systems for operation. It can be said that it provides convenience for the people in the car while also improving the visual experience inside the car. However, if the car display screen fails, the inconvenience it will bring to the driver will be obvious. Therefore, if there is a problem, it should be checked and repaired in time.
4
1
Share

Can a Smart Key Be Locked Inside the Car?

Smart keys cannot be locked inside the car. The main reasons are as follows: 1. When the car key is left inside the vehicle, an alarm will automatically trigger as a reminder. 2. Some high-end cars are equipped with keys that prevent the doors from automatically locking as long as the key is near the car. The doors will only lock automatically when the key moves out of the sensing range. Additional Information: 1. The "Keyless Entry System" for cars is not a traditional key but a smart key or smart card. 2. The car keyless entry system, abbreviated as PKE, utilizes the world's most advanced RFID (Radio Frequency Identification) technology and vehicle identity coding recognition system. It pioneers the development of compact, low-power RF antenna solutions and successfully integrates remote control systems with keyless systems while maintaining traditional vehicle circuit protection. This achieves a true dual RF system with dual anti-theft protection, providing maximum convenience and security for car owners.
12
2
Share

How to Use the Foot-Operated Parking Brake?

The foot-operated parking brake works on the same principle as the hand-operated parking brake, achieving the parking brake function by tightening the brake shoes via steel cables. The foot brake simply replaces the hand lever with a pedal. The usage method of the foot-operated parking brake in automatic transmission vehicles is as follows: 1. Foot-operated parking brake: The parking brake is operated by foot, commonly found in automatic transmission models. 2. Operation method for foot-operated parking brake: Press the left pedal all the way down to engage the brake. To release, press down firmly with the left foot again and then release to disengage the parking brake. 3. For Mercedes-Benz vehicles with foot-operated parking brakes, manual assistance is required to release the brake. There is a handle on the left side of the steering wheel; pulling it will release the foot-operated parking brake.
15
5
Share

Does a 48V Mild Hybrid Need Charging?

48V mild hybrid vehicles do require charging. Here are the relevant details: Introduction to Hybrid Systems: When the vehicle does not require high power output from the engine, part of the engine's power is used to generate electricity and store it in the battery. Additionally, the kinetic energy reduced during vehicle deceleration and braking is also converted into electrical energy and stored in the battery by the system. Reasons for Hybrid Charging: While the engine can indeed charge automatically when using fuel, the fuel cost consumed by engine-guided charging is higher than that of direct charging to full capacity. Moreover, the charging time is far from sufficient. Therefore, regular supplementary charging of this power supply battery is necessary to ensure the normal operation of the electric power. As a result, hybrid vehicles typically offer consumers an additional charging option.
15
5
Share

What are the differences between the JAC Refine M4 and the Maxus G10?

Detailed introduction of the differences between the JAC Refine M4 and the Maxus G10 is as follows: Exterior: The 2022 SAIC Maxus MAXUS G10 Gasoline Value Edition basically continues the brand's classic design, adhering to the 'Wings of Victory' design language, featuring a grand and open front face with an overall stable shape; The 2020 JAC Refine M4 has a business-oriented front face, adopting a bottle-mouth-shaped chrome front grille, complemented by eagle-eye headlights and LED daytime running lights, highlighting its business temperament. Interior: The 2022 SAIC Maxus MAXUS G10 Gasoline Value Edition features a multifunctional floating luxury center console and a built-in 7-inch touchscreen, bringing an extraordinary sense of technology; The 2020 JAC Refine M4 interior continues the business style, using a soft-wrapped center console with an embedded 8-inch capacitive touchscreen and fully-wrapped aviation seats, fully showcasing its business style.
15
5
Share

What is the appropriate speed range on the highway?

On the highway, a speed between 90km/h and 120km/h is appropriate. Here are some highway driving techniques and precautions: Driving techniques: Check the rearview mirror when braking, and judge the following distance based on the speed of the vehicle in front and the starting time; maintain a fast and steady driving pace, adjust your mindset, and drive with a good attitude for stability and safety; know how to use the horn and turn signals to communicate with vehicles in front and behind. Highway driving precautions: When driving on the highway, vehicles must comply with traffic regulations, and different types of vehicles should drive in their respective lanes. Both the driver and the front passenger must fasten their seat belts, and it is essential to keep them fastened throughout the entire journey on the highway. The driver should concentrate on driving and avoid making phone calls, looking at the phone, or using headphones to listen to the radio, as this may prevent hearing the horns of other vehicles, leading to potential dangers.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.