How to Unlock the Steering Wheel Lock on a BYD F0?

1 Answers
StLucy
07/25/25 1:26pm
To unlock the steering wheel on a BYD F0, press the brake pedal, then turn the steering wheel left and right, and finally press the start button to start the car. Below is an introduction to the steering wheel lock: 1. The steering wheel locks primarily because the steering wheel was turned when the key was removed after the last reverse maneuver. The car's anti-theft security system interprets this as a potential theft risk, so it locks the steering wheel to prevent vehicle theft. 2. The locking mechanism involves a spring-controlled steel pin that engages with a pre-drilled hole when the key is removed and the steering wheel is turned. This locks the steering wheel in place. When the steering wheel is locked, it cannot be turned, the key cannot be turned either, and the car cannot be started, thus achieving anti-theft protection.
Was this review help?
6
4
Share
More Forum Discussions

In which country is Renault produced?

Renault is a car produced in France, and its models include Megane, Laguna, Scenic, Captur, Koleos, etc. Taking the 2018 Urban Style Edition Captur as an example, its body dimensions are: 4128mm in length, 1778mm in width, and 1565mm in height, with a wheelbase of 2606mm. The 2018 Urban Style Edition Captur features a front suspension in the form of MacPherson independent suspension and a rear suspension in the form of torsion beam non-independent suspension. It is equipped with a 1.2L turbocharged engine, delivering a maximum horsepower of 116PS, a maximum power of 85kW, and a maximum torque of 190Nm, paired with a 6-speed dual-clutch transmission.
2
3
Share

Are the wiper and washer motor of the Teana protected by the same fuse?

The wiper and washer motor of the Teana are protected by the same fuse. Working principle of the wiper: The wiper motor adopts a 3-speed structure for easy speed variation. The intermittent time is controlled by the intermittent relay, utilizing the motor's return switch contacts and the relay's resistor-capacitor charge-discharge function to make the wiper sweep at a certain cycle. Introduction to fuses: Fuses can protect the circuit by melting themselves when the circuit current or temperature is too high. There are two types of automotive fuses: high-current and low-current fuses. However, the more common ones in cars are medium and low-current fuses, and the wiper fuse belongs to the blade-type fuse.
10
0
Share

Does the Haima S5 have hill start assist?

Haima S5 has hill start assist, which is a function derived from the ESP system. It allows the vehicle to stop and start on a slope without using the handbrake to prevent rollback accidents. The activation conditions for the hill start assist system are: 1. The gear lever is in any position other than P; 2. The accelerator pedal is not pressed; 3. The vehicle is stationary; 4. The parking brake is not engaged. Taking the 2019 Haima S5 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4418mm, width 1823mm, height 1630mm, wheelbase 2630mm, front track 1540mm, rear track 1545mm, and curb weight 1380kg.
4
4
Share

How to adjust the rearview mirror of the Buick Excelle?

Buick Excelle rearview mirror adjustment method: The adjustment button is located on the left instrument panel of the driver. Turn the control knob left or right to select the corresponding side mirror, then push the control knob left, right, up, or down to adjust the mirror. Before driving, adjust the seat position first and then adjust the rearview mirror. The Buick Excelle is a compact sedan produced by SAIC-GM Buick. It features a MacPherson strut front suspension and a multi-link independent rear suspension. In terms of body dimensions, it measures 4609mm in length, 1798mm in width, and 1486mm in height, with a wheelbase of 2640mm. For power, the Buick Excelle is equipped with a 1.3T turbocharged engine paired with a 6-speed automatic transmission.
2
0
Share

Where is the USB port located in the Mercedes-Benz S400L?

The USB port of the Mercedes-Benz S400L is located inside the storage compartment in the front center armrest. Function of the USB port: The in-car USB port not only allows charging of devices like mobile phones through car adapters or cigarette lighters but also facilitates the transmission of audio data. Therefore, the current of the interface in Mercedes-Benz cars is only 5V/0.5A. Voltage of in-car chargers: Due to the lower voltage provided by the car, the in-car charger only requires an overload protection circuit internally. A fuse is designed at the front end of the in-car charger socket. When the current exceeds the capacity of the overload protection circuit, the fuse immediately blows to provide protection.
12
0
Share

How to reset the tire pressure light on Roewe 360?

The method to reset the tire pressure light on Roewe 360 is as follows: 1. Locate and press the instrument information switch button on the multifunction steering wheel; 2. The tire pressure information will then appear on the instrument panel. If the tire pressure is abnormal, the tire pressure warning will also be displayed here. Then, press the RES button on the multifunction steering wheel; 3. Switch to the tire pressure monitoring setup interface and click the reset button to reset the tire pressure monitoring. The Roewe 360 is a compact sedan produced by SAIC Motor. It features a MacPherson strut front suspension and an H-shaped torsion beam rear suspension. The vehicle dimensions are 4579mm in length, 1804mm in width, and 1490mm in height, with a wheelbase of 2660mm.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.