How to Unbind a Vehicle from ETC?
1 Answers
Method for unbinding a vehicle from ETC: The vehicle owner needs to bring their ID card and a copy, vehicle license and a copy, the ETC device, and the bank card used for ETC binding to the bank. After the bank staff verifies the documents, they will cancel the ETC binding with the original license plate information and rebind it to a new license plate number. The bank staff will then install the ETC device in the vehicle and activate it on-site for normal use. The ETC installation process is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU; a red light will briefly illuminate, and the OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning properly. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then, peel off the protective film on the OBU adhesive and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield, ensuring the chip is inserted into the OBU device. ETC activation method: Insert and remove the ETC card twice in succession until the electronic tag screen displays "Bluetooth On." If the screen shows "Tag Invalid" when inserting and removing the card twice without the electronic tag attached, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth. Turn on your phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Enter the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. Once connected, upload a photo of the front of the vehicle to complete activation.
