How to Turn On the Wireless Charging in Trumpchi?

3 Answers
OAlessandra
07/29/25 9:37am
The method to turn on the wireless charging in Trumpchi is: 1. Locate the wireless charging switch in front of the gear lever; 2. Press the wireless switch to turn it on. Wireless charging, also known as inductive charging or non-contact inductive charging, utilizes near-field induction, i.e., inductive coupling, to transfer energy from the power supply device (charger) to the electrical device. The device uses the received energy to charge the battery and simultaneously powers its own operation. Taking the Trumpchi GS4 as an example: The Trumpchi GS4 is a compact SUV equipped with a 1.5T turbocharged engine and a 6-speed manual transmission. The dimensions of this vehicle are 4545mm in length, 1856mm in width, and 1668mm in height, with a wheelbase of 2680mm.
Was this review help?
16
4
Share
LolaLynn
08/12/25 10:45am
I've used wireless charging on my Trumpchi car, and the operation is actually quite simple. After starting the vehicle, take a closer look at the storage compartment area below the center console. You'll notice a section with a lightning bolt symbol—that's the wireless charging pad. Just place your Qi-compatible phone flat on it, but remember to remove overly thick phone cases. I tried it on the GS4, and after placing the phone, the screen displays a green 'Charging' icon. The location may vary across different models; for instance, in the new M8 Master, it's inside the armrest box, which requires manually flipping open the lid. If there's no response, first confirm that the vehicle is ignited or powered on, then check if the phone is properly positioned—sometimes a slight angle misalignment can cause poor contact. The car also features temperature protection, automatically pausing charging if overheating occurs, which is quite thoughtful.
Was this review help?
15
0
Share
Expand All
Prim
10/06/25 6:50am
Discovering that GAC Motor's wireless charging requires three conditions to be met: first, the vehicle must be started or in the power-on state; second, locate the charging area marked with a coil symbol in the armrest box or under the center console; third, the phone itself must support wireless charging functionality. Simply place the phone face up, and a charging prompt will pop up on the screen. If it doesn't start, it's recommended to check if the wireless charging switch near the cigarette lighter has been accidentally turned off. Also, remember to avoid placing keys, metal cards, or other items that may interfere with charging nearby. From my experience, Huawei Mate and iPhone are the most responsive when placed on the charger, while some older Android models may require position adjustments to trigger charging.
Was this review help?
9
5
Share
Expand All
More Forum Discussions

What is the ground clearance of the new Accord?

The minimum ground clearance of the Accord is 100mm. Minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the horizontal ground when the car is parked on a level surface under rated full load conditions. Function of ground clearance: The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability. Introduction to the Accord: The Accord is a testament to Honda's innovative spirit and global leading technology, with a 38-year history worldwide. The original tires for the Accord are Michelin's ultra-high-performance Pilot Super Sport tires. On April 16, 2018, the all-new Honda Accord, also known as the tenth-generation Honda Accord, was officially launched in China.
13
1
Share

Is the 14t transmission of the Tayron dry or wet?

The 14t transmission of the Tayron is a wet dual-clutch transmission, with the clutch located between the engine and the gearbox. Difference between dry and wet engines: The main difference between dry and wet clutches lies in the connection medium between the driving disc and the driven disc. Dry dual-clutch transmissions rely on air for transmission, while wet dual-clutch transmissions use oil. Wet dual-clutch transmissions must have a hydraulic pump, lubricating fluid, cooling pipes, and an external cooling system. Introduction to dry and wet engines: A wet dual-clutch refers to a dual-clutch system consisting of two sets of multi-plate clutches, one large and one small, mounted coaxially. They are housed in a sealed oil chamber filled with hydraulic oil, giving the wet clutch structure better adjustment capabilities and superior heat resistance, allowing it to transmit higher torque. The dry dual-clutch was developed based on the 6-speed DQ250 wet dual-clutch technology, simplifying the related hydraulic systems.
4
4
Share

Where is the transmission vent hole on the new Jetta?

The vent hole of the transmission is located at the top of the transmission, near the right-side axle flange, and is the same length as the drain plug. Transmission: A device that changes the speed ratio and direction of motion. Used in automobiles, tractors, ships, machine tools, and various machines to alter the torque, speed, and direction of motion transmitted from the driving shaft to the driven shaft under different working conditions. A gear-driven transmission generally consists of a housing and several pairs of gears. Function of the transmission: During vehicle operation, to adapt to different working conditions, the driving force and speed of the vehicle need to vary within a certain range. However, the existing engine's torque and speed variation range cannot meet this requirement, hence the transmission is installed. It changes the gear ratio between the engine and the wheels, allowing the engine to operate under optimal conditions, expanding the torque and speed transmitted to the driving wheels, and achieving different speeds. It enables the vehicle to reverse and provides a neutral position.
3
0
Share

What causes the dome light in a GL8 to stay on?

The dome light in a GL8 may stay on if the switch is not set to OFF; turning it to OFF will turn the light off. Alternatively, if the switch is in DOOR mode, opening and then closing the door again may turn the light off. Relevant information about the Buick GL8 is as follows: 1. Basic Information: On April 12, 2020, the new generation Buick GL8 Avenir family was launched. As the epitome of Buick's design excellence, cutting-edge technology, and superior quality, the new generation GL8 Avenir family inherits Buick's heritage in MPV product development. 2. Safety Features: The new generation Buick GL8 Avenir family is equipped with Buick's advanced intelligent driving assistance system, offering 20 advanced intelligent driving assistance functions, including LCC Lane Centering Cruise, TJA Traffic Jam Assist, HOD Hands Off Detection, DOW Door Open Warning, and more.
14
2
Share

Is the Yingbao an automatic or manual transmission?

The Yingbao is equipped with an automatic transmission; this model does not offer a manual transmission option. Below is relevant information about the GAC Trumpchi Yingbao: Product Overview: The GAC Trumpchi Yingbao is a sporty sedan built on the GPMA platform, featuring the brand's latest design language with two distinct styling options available for consumers. In terms of powertrain, the initial models are equipped with the new 1.5T engine from the Julang Power series, with potential future additions of a 2.0T version. Technical Specifications: The Yingbao is powered by the third-generation 1.5T-GDI engine from the Julang Power series, delivering a maximum power of 130kW and peak torque of 270Nm. Centered around GCCS technology, it integrates twin-scroll turbocharging, top-mounted water-cooled intercooling, high-pressure direct injection, large-inertia balance shafts, intelligent thermal management, and low-friction technology, achieving a fuel consumption as low as 5.7L per 100km.
8
1
Share

How to Test the Condition of an Ignition Coil?

Methods to test the condition of an ignition coil include: 1. Feel the temperature of the ignition coil casing by hand; it is normal if it feels warm, but if it is too hot to touch, it indicates an inter-turn short circuit fault in the ignition coil. 2. Measure the resistance of the primary and secondary windings with a multimeter; if the resistance is infinite, it indicates an open circuit fault in the winding. 3. Compare the spark intensity of the ignition coil being tested with that of a known good ignition coil by connecting them separately. Faults in the ignition coil can lead to: 1. No secondary voltage being generated, or the secondary voltage being too low to ignite. 2. Although sparking may occur, reduced secondary voltage results in insufficient ignition energy, causing high-speed misfires, incomplete combustion, difficulty in starting the engine, unstable idle, reduced power, increased exhaust pollution, and higher fuel consumption.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.