How to Turn on the Wiper of an Exam Car?
2 Answers
The method to activate the wiper of an exam car is to push the wiper control lever. By pushing the wiper control lever up or down, you can control the wiper's operation modes, which include intermittent, off, auto, and high/low speeds. When the adjustment knob is in the auto mode, you can adjust the sensitivity of the rain sensor by sliding the sensitivity adjustment switch left or right, thereby changing the wiper's frequency. Sometimes, you may also need to activate the windshield washer fluid switch while using the wiper. Simply pull the control lever lightly toward the driver to make both the windshield washer and wiper work simultaneously. If the wiper does not function, it is often due to a blown fuse, and replacing the burnt fuse will solve the issue.
The method to activate the wipers in the test car is quite simple. There is usually a control lever on the right side of the steering wheel or near the dashboard. Having taken the test several times, I found that pulling the lever downward once activates the low-speed mode, and pulling it again switches to high-speed. If the vehicle has an intermittent function, a gentle push adjusts the wiping frequency. During the driving test, you must proactively turn on the wipers in rainy weather to ensure clear visibility through the windshield, otherwise, the examiner will deduct points. I also recommend familiarizing yourself with the specific settings of the test car beforehand, as operations vary slightly between different vehicles—some have the control lever on the left or include a washer button. Additionally, wiper blades need regular inspection and replacement to prevent aging from affecting performance; remain calm during the test and avoid excessive force to prevent damaging the components. In summary, proper use of wipers is fundamental to safe driving, especially crucial in rainy conditions, making the test go more smoothly.
