How to Turn on the Windshield Wipers?

1 Answers
EmmanuelRose
07/29/25 11:22am
Method to turn on the windshield wipers: By pushing the control lever up or down, you can control the wiper's intermittent, off, auto, low-speed, and high-speed modes. If set to auto-adjust mode, you can rotate the adjustment knob to change the sensitivity of the rain sensor, thereby adjusting the wiper's frequency. The meanings of the icons and letters on the wiper handle: 1. OFF means the front wipers are in the off state; 2. INT represents automatic intermittent operation; 3. LO stands for continuous operation; 4. HI indicates continuous high-speed operation. Windshield wipers, also known as wipers, water wipers, or rain wipers, are devices used to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. Due to legal requirements, all cars are equipped with windshield wipers, and rear windows of vehicles such as hatchbacks and SUVs also have wipers.
Was this review help?
2
5
Share
More Forum Discussions

What Stickers Need to Be Displayed on a Car?

On a car, you need to display the compulsory traffic insurance sticker, annual inspection sticker, and environmental protection sticker. If the driver has held a driver's license for less than one year, they must also display a probationary driver sticker on the rear of the car. If a motor vehicle driven on the road does not display the compulsory traffic insurance sticker, traffic management authorities may impound the vehicle in accordance with regulations and notify the party to provide the compulsory traffic insurance sticker or complete the necessary procedures. The annual inspection sticker refers to the sticker that the owner should affix to the front windshield after passing the annual inspection as proof. If lost, the owner must bring all required documents to the vehicle management office, motor vehicle registration service station, or traffic police station to apply for a replacement. The environmental protection sticker is a classification sticker issued by the state for motor vehicle emission standards, divided into yellow and green categories. It is issued after reviewing the vehicle type and emission standards, with the purpose of facilitating energy-saving and emission-reduction inspections and regular environmental protection checks for vehicles.
4
3
Share

How to Quickly Dry Water Inside the Car?

To quickly dry water inside the car, you can wipe, ventilate, or extract the water, but drivers should not attempt to handle it themselves as accumulated water can cause short circuits in the vehicle's electrical system. It is recommended to visit the nearest repair shop for professional assistance. Below are the detailed steps for cleaning up water inside the car: First, completely remove the water inside the car: If the water accumulation is caused solely by rain, simply open the car windows on a sunny day to allow thorough airing. If water has entered the cabin, the repair process mainly involves removing the accumulated water. There are several rubber seals located at the bottom of the vehicle chassis; opening these seals can drain the water from the cabin. However, since the floor mats inside the car are highly absorbent, they should be removed and placed in a spacious area to facilitate evaporation. If there is still moisture inside the car, turn on the air conditioning and adjust the air circulation switch to the internal circulation mode. This allows the moisture inside the cabin to be expelled through the air conditioning system, which is a very efficient dehumidification method in summer. Clean and dry the items inside the car: Rain can easily bring dirt and mud into the car. On a sunny day, remove detachable interior items such as floor mats and seat covers for airing and cleaning. For less dirty carpets, use a vacuum cleaner directly. For heavily soiled carpets, specialized detergents are required. Start by removing dust, then spray an appropriate amount of detergent and scrub. Note that carpets should not be fully immersed in water for scrubbing, as this can damage the adhesive layers between different materials inside the carpet and prolong drying time, affecting usage and causing dampness inside the car. Disinfect and thoroughly clean: Wash seats and seat covers with bleach, and replace absorbent cotton to prevent bacterial growth. Ozone disinfection can also be performed. The air conditioning evaporator should be disassembled, rinsed, disinfected, and dried. The blower should also be cleaned carefully. Perform air purification inside the car using "photocatalyst" technology to purify the air.
14
1
Share

Does Static Water Submerged Vehicle Damage Insurance Cover Compensation?

If you have purchased vehicle damage insurance, the insurance company will provide compensation. Below are the specific details regarding the coverage: Introduction: Vehicle damage insurance refers to a type of commercial auto insurance where the insurer compensates within reasonable limits for damages to the insured vehicle caused by an insured accident while the vehicle is being used by the policyholder or an authorized driver. Expansion: Vehicle damage insurance is a basic coverage in auto insurance, primarily covering the loss of the insured vehicle and any damages caused to third parties by the insured vehicle during use. Even damages caused by natural disasters are covered by the insurance company.
7
2
Share

What Issues Should Be Noted When Replacing a Car Battery?

Issues to note when replacing a car battery: 1. Always confirm the battery model during replacement to prevent incompatibility with the original factory battery; 2. Ensure the vehicle is turned off during battery replacement to avoid potential safety hazards. It is essential to use the exact battery model specified by the original manufacturer. An incorrect model may not fit perfectly, affecting the vehicle's normal operation. A car battery, also known as a storage battery, is a type of battery that converts chemical energy into electrical energy. Typically, car batteries refer to lead-acid batteries, which are primarily made of lead and its oxides, with sulfuric acid solution as the electrolyte.
13
1
Share

Why Does Engine Oil Emulsify?

Engine oil emulsification occurs due to water contamination in the oil. The method to check for emulsification is: 1. Open the engine oil cap; 2. Inspect the inner side of the oil cap and the oil filler neck. If the oil appears milky white or creamy yellow, it indicates emulsification. The causes of water entering the engine oil leading to emulsification are: 1. Cracked water jackets in heat exchangers allowing water to mix with oil; 2. Poor cylinder head sealing, cracked water jackets, leaking cylinder liner water jackets, or cylinder liner cavitation, allowing water from the combustion chamber to enter the oil. Emulsified oil loses its film strength and fails to meet engine lubrication requirements, necessitating replacement.
15
2
Share

What is the function of the automatic transmission valve body?

The function of the automatic transmission valve body is: during gear shifting, it controls the part used to switch the oil passages leading to various gear shifting actuators (clutches and brakes), thereby achieving gear shift control. An automatic transmission vehicle refers to a vehicle that does not require the driver to manually shift gears; the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. An automatic transmission is a type of transmission device that can automatically shift gears based on the vehicle's speed and engine RPM, as opposed to a manual transmission. It mainly includes four types: hydraulic automatic transmission, mechanical continuously variable automatic transmission, electronically controlled mechanical automatic transmission, and dual-clutch automatic transmission.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.