How to Turn on the Verna Fog Lights?

3 Answers
MacZoe
07/25/25 8:48am
Method to turn on the Verna fog lights: First, locate the fog light switch, which is located on the inner side of the control lever and is controlled by rotation. Turn it upwards once to turn on the front fog lights, and turn it twice to the rear fog light position, which simultaneously turns on both front and rear fog lights, and vice versa to turn them off. After turning on the parking lights, you can then turn on the fog lights. Among them, the front fog lights can be turned on individually, while the rear fog lights can only be turned on simultaneously with the front fog lights and cannot be turned on individually. The Verna is positioned as a compact car, with a body length of 4300mm, width of 1705mm, height of 1460mm, and a wheelbase of 2570mm. The Verna is equipped with a 1.4L naturally aspirated engine, with a maximum power output of 70kw and a peak torque of 132.4nm.
Was this review help?
4
3
Share
KendraAnn
08/11/25 1:57pm
To turn on the Kia Rio's fog lights, I find the steps quite straightforward. First, start the car and wait for the engine to stabilize. Then, locate the lever control on the left side of the steering wheel, turn it to the headlight position to ensure the basic lights are on. Next, carefully look for a small icon resembling a fog cloud on the lever; twist it or press that position to activate the front fog lights. The rear fog light might be on a separate button, usually near the dashboard. Avoid using fog lights on clear days as the intense light can be glaring and disrupt other drivers—reserve them for foggy or rainy conditions to enhance low-ground illumination for safety. Practice a few times and refer to the car's user manual for detailed diagrams to avoid mistakes. Fog lights are useful but not frequently used, which helps reduce bulb wear and maintenance costs. Remember, safety first—drive slowly when using fog lights for optimal effect.
Was this review help?
3
3
Share
Expand All
MacEli
09/27/25 7:10am
I think using fog lights requires attention to safety. After starting the Verna, turn the light lever to activate the low beams. Then, locate the fog light icon symbol on the same lever—usually pressing downward or rotating it will turn on the front fog lights. Once activated, make sure to check the rear fog lights as well to avoid forgetting to turn them on. Only use fog lights in heavy fog or heavy rain to improve visibility and protect yourself, and avoid turning them on unnecessarily to prevent blinding oncoming drivers. As a driver, develop good habits: perform a quick check before driving to ensure the fog lights are functioning properly, and replace dim bulbs promptly to avoid hazards. Operating fog lights is simple, but it’s a matter of life and death—use them responsibly to reduce accidents. Practice and familiarize yourself with them in the garage when parked to save time.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

How to Use the One-Button Start in Audi A3?

Audi A3 one-button start usage: 1. The one-button start button of the Audi A3 is located at the lower left corner of the gear lever. Enter the driver's seat, and as long as the key is nearby, you can directly press the button to start the engine; 2. When starting, press the brake pedal firmly and then press the ignition button; 3. When turning off, stop the vehicle and press the one-button start button. The Audi A3 is a sedan product produced by Audi, developed based on the Volkswagen MQB platform, featuring lightweight design and aluminum materials for the body. In terms of appearance, the car uses chrome accents on the air intake, black reflective material on the B-pillar, newly designed mirrors, door handles, and rear spoiler; while the headlights are as sharp as those on the Q5, with added LED daytime running lights.
12
2
Share

Can I Register a Car Bought in Another City with My Hometown License Plate?

You can register a car bought in another city with your hometown license plate, but before purchasing, make sure the vehicle comes with a legitimate invoice and a vehicle qualification certificate, commonly referred to as the "big book." This is especially important for used cars. For used cars, also check whether the vehicle's insurance is still valid, as driving without valid insurance is prohibited, making it impossible to register the car in your hometown. Obtain a temporary license plate at the place of purchase, which is valid for only seven days. Ensure you drive the car back to your hometown within this period and register it with a formal license plate on time. Once back in your hometown, bring the original and a copy of the vehicle qualification certificate, the original purchase invoice, the tax payment certificate, the owner's ID, and the insurance policy to complete the formal license plate registration process.
15
5
Share

What are the starting steps for the Sylphy?

Sylphy starting steps: 1. Press the foot brake and press the start button twice to initiate the car's computer system self-check, lasting at least 6 seconds; 2. Press the foot brake and press the start-stop button to ignite; 3. Release the foot brake and warm up the car while stationary; 4. Press the foot brake, release the handbrake, and shift the gear from P to D; 5. Slowly release the foot brake to start moving; 6. Then, according to road conditions, steadily press the accelerator to increase speed and drive safely. The Sylphy is a compact car under Dongfeng Nissan, with dimensions of 4641 mm in length, 1815 mm in width, and 1450 mm in height, and a wheelbase of 2712 mm. In terms of suspension, the Sylphy features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
20
2
Share

What is the function of fog lights?

The functions of fog lights: 1. Front fog lights can improve visibility in unclear road conditions ahead by providing a high-intensity scattered light source that penetrates thick fog, serving to alert oncoming drivers; 2. Rear fog lights are designed to make the vehicle more visible to other road users behind in low-visibility conditions such as fog, snow, or rain. Installed at the rear of the vehicle, they emit light at a higher intensity than tail lights. Fog lights are divided into front and rear types, with front fog lights typically being bright yellow and rear fog lights red. The symbols for front and rear fog lights differ slightly: the front fog light symbol features downward light lines, while the rear fog light symbol has parallel lines, usually located on the dashboard inside the vehicle.
6
5
Share

Where is the cabin air filter located in the MG6?

The cabin air filter in the MG6 is located in the engine compartment, near the right turn signal, beneath the windshield wipers. The cabin air filter is used to filter particles from the air, such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. In terms of appearance, the MG6's design differs significantly from the Roewe 550, with the MG6 adopting a more sporty design style, resulting in a sharper and more dynamic front fascia. The distinctive BMW-like double-kidney grille is a traditional feature of MG models, while the blackened headlights are as sharp as those on the Roewe 550, sharing many similarities with the earlier W2 concept car.
6
3
Share

What are the symptoms of clutch slipping failure?

The symptoms of clutch slipping failure: 1. When starting the car, completely releasing the clutch pedal does not allow the car to start or makes starting difficult; 2. During acceleration while driving, the vehicle speed does not increase with the rise in engine RPM, and the engine's power is not fully transmitted to the drive wheels, resulting in weak driving force; 3. When fully loaded and going uphill, the slipping is more obvious, and in severe cases, a burning smell from overheating friction linings may occur. Causes of clutch slipping: 1. The clutch pedal free play is too small or nonexistent, causing the release bearing to frequently press against the diaphragm spring, keeping the pressure plate in a semi-engaged state; 2. Reduced elasticity of the diaphragm spring; 3. Excessive wear or hardening of the friction disc, contamination with oil, or exposed rivets; 4. Loose connecting bolts between the clutch and flywheel; 5. Improper adjustment of the release levers.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.