How to Turn On the Start-Stop Function in a 2015 Mercedes-Benz E260?

1 Answers
SanEvelyn
07/30/25 2:02am
The automatic start-stop button is located in the functional control area in front of the center armrest, near the handbrake. The automatic start-stop button is a mechanical key. To turn it on or off, simply press the button.
Was this review help?
1
5
Share
More Forum Discussions

Does an Automatic Transmission New Car Need a Break-in Period?

If the vehicle's user manual does not specify otherwise, an automatic transmission new car does require a break-in period. Here is a detailed introduction to the precautions for breaking in a new car: 1. Pay attention to the break-in mileage: The break-in mileage for a new car is generally 1,000-3,000 kilometers. The initial break-in period is 0-500 kilometers. During this phase, avoid aggressively stepping on the accelerator or brakes, and keep driving speed and engine RPM low—speed should not exceed 70 km/h, and engine RPM is best kept below 2,000 rpm. The mid-term break-in period is 500-1,000 kilometers, during which driving speed and engine RPM can be moderately increased, but speed should not exceed 90 km/h, and the engine's maximum RPM can reach 2,500 rpm. The late-term break-in period is 1,000-3,000 kilometers. On good road conditions, speed can be increased up to 120 km/h, and the engine's maximum RPM can be raised to 3,000 rpm. To maintain the engine's vitality, avoid high RPM operation while driving—the lower the RPM, the better—otherwise, it may cause engine damage. 2. Emphasize warming up the car: Do not start driving immediately after starting the car. Wait until the coolant temperature reaches the normal operating range before moving. Especially in cold winter, gently press the accelerator pedal to allow the engine to operate at a slow pace. If you cannot warm up the car before driving, drive at low speed for the first 5 minutes after starting, and only accelerate once the coolant temperature is sufficiently high.
18
3
Share

How to Distinguish Between Reiz Versions?

Distinguishing between Reiz versions is quite simple. The Reiz was available in China for a total of twelve years, during which it underwent only two generational updates. Comparing the first-generation and second-generation models, the differences are as follows: 1. Power differences: The first-generation model had slightly more power than the second-generation, though the difference was minimal. For the 2.5L models, the first-generation had a maximum horsepower of 197PS, while the second-generation had 193PS. For the 3.0L models, the first-generation had a maximum horsepower of 231PS, while the second-generation had 227PS. 2. Throttle tuning differences: The first-generation Reiz had more responsive throttle tuning compared to the second-generation. 3. Steering feel differences: The second-generation Reiz had better steering than the first-generation. The steering in the second-generation felt more precise, with heavier power assistance, resulting in a more stable overall feel.
7
5
Share

What is the fuel tank capacity of the Honda XR-V?

The fuel tank capacity of the Honda XR-V is 50 liters. The Honda XR-V is a strategic model launched by Dongfeng Honda for the compact SUV market, featuring a panoramic sunroof across the entire lineup. In terms of power, the Honda XR-V offers a choice between a 1.8L naturally aspirated engine or a 1.5L Earth Dreams engine. The former delivers a maximum power of 136 horsepower. For the transmission system, it is paired with either a 6-speed manual transmission or a CVT transmission. Regarding body dimensions, the Honda XR-V measures 4270mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm.
20
0
Share

Where is the Trax's Cabin Air Filter Located?

Trax's cabin air filter is located inside the glove compartment in front of the front passenger seat. The cabin air filter is a filter installed in the vehicle's air conditioning system. During air conditioning operation, it captures dust particles, purifies incoming air, reduces respiratory irritation, ensuring both passenger health and protection of the vehicle's AC system. The Trax is a Chevrolet MPV equipped with a 1.4T engine, suitable for family travel. Its body dimensions are 4255mm (length) x 1776mm (width) x 1675mm/1687mm (height) with a 2555mm wheelbase.
12
2
Share

What does the SS on the car dashboard mean?

SS on the car dashboard is the auto start-stop indicator light. This light turns on when the start-stop function is activated and turns off when it's deactivated. The engine auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) during driving. This is achieved by equipping a traditional engine with an enhanced motor that has idle start-stop functionality, allowing the engine to completely shut down when idle stop conditions are met. When the vehicle needs to move again, the idle start-stop motor system quickly responds to the driver's start command, rapidly restarting the engine for seamless transition, thereby significantly reducing fuel consumption and exhaust emissions.
4
1
Share

What are the symptoms of a faulty car air conditioning pressure switch?

The symptoms of a faulty car air conditioning pressure switch include: poor contact of the contacts or abnormal operation of the pressure switch, leading to the compressor not working or failing to provide normal pressure protection. Car air conditioning pressure switches are categorized into low-pressure switches, high-pressure switches, dual-temperature switches, and three-stage pressure switches. The inspection methods for car air conditioning pressure switches are as follows: 1. Check the continuity of the pressure switch. Use an ohmmeter to measure the resistance between terminals 4M1 and 4M2 of the pressure switch. The resistance should be 0. If the resistance is not 0, it indicates poor contact of the normally closed contacts in the pressure switch, and the pressure switch needs to be replaced. If the resistance is 0, proceed to the performance test of the pressure switch. 2. Perform a performance check on the pressure switch. Test the operation of the pressure switch under specified pressure conditions. If the test results are abnormal, replace the pressure switch.
13
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.