···
Log in / Register

How to Turn On the S90 Ambient Lighting?

4 Answers
AdelynDella
09/07/25 7:01am

The ambient lighting button is located on the central LCD display. Press the vehicle's one-touch start button to power on the vehicle; otherwise, you cannot adjust the ambient lighting. Click the screen touch button on the right side of the steering wheel to activate the ambient lighting adjustment function on the central LCD display. You will see the vehicle's ambient lighting display different colors based on the adjustments made on the central screen. Choose your preferred color.

Was this review help?
18
1
Share
GrantDella
09/19/25 6:08am

Just helped a friend adjust the ambient lighting in his S90 a couple of days ago. Found the little car icon below the center console screen, tap into it, then select 'Settings' → 'My Car' → 'Lighting'. There's an ambient lighting option inside - tap to switch between seven colors, plus there's a brightness slider. The brightness setting before engine-off gets remembered automatically, but the color needs to be reselected each startup. If the settings malfunction, it's probably system lag - locking the car after turning off and waiting ten minutes usually fixes it. Remember not to install metalized window films as they interfere with signals - dealership says this causes touchscreen glitches.

Was this review help?
13
1
Share
Expand All
BriannaRose
11/02/25 6:30am

The logic of this generation's Volvo infotainment system is indeed a bit hidden. To find the ambient lighting, you first need to press the HOME button on the steering wheel to enter the main menu. Then swipe right to the 'Settings' tab, click on the vehicle icon, and select the ambient light option under lighting. For the newer models with crystal gear levers, you can quickly access it by double-tapping the upper edge of the air conditioning panel. A reminder for older model owners: pre-2022 models could only adjust brightness up to 30%, and full 100% control was only granted via later OTA updates. A modification shop owner told me that connecting aftermarket light strips in parallel can easily burn out the BCM module. Although the OEM only offers single-color lighting, it's more stable.

Was this review help?
19
3
Share
Expand All
CharlotteLee
12/16/25 6:33am

Actually, pressing the voice button and saying 'Turn on the ambient lights' is the fastest way, provided that the car's system is logged into an account. For manual operation: swipe down from the top of the central control screen to bring up the quick menu. In some versions, you need to long-press a blank area to enter edit mode, then drag 'Ambient Lighting' to the first screen. You can choose between ice blue or amber yellow colors, with warm light being less harsh on the eyes. A mechanic added that the ambient lights are linked to the door locks, automatically lighting up for 20 seconds as a welcome when unlocked. They are forcibly turned off when the battery is low on power but will resume once sufficiently charged.

Was this review help?
17
3
Share
Expand All
More Forum Discussions

Does having children in the car count as overloading?

Children in the car do count as overloading. Overloading is calculated based on headcount. As long as the number of passengers exceeds the limit, even if it's a child or an infant being held in arms, it's considered overloading. For driving an operational passenger vehicle or a passenger car with overload (but less than 20%), or a truck with overload (but less than 30%), 3 demerit points will be deducted. For a truck overloaded by more than 30% or carrying passengers illegally, or a passenger car (other than operational passenger vehicles) overloaded by more than 20%, 6 demerit points will be deducted. For school buses or passenger buses, if there is serious overloading or serious speeding, regardless of whether an accident occurs, once discovered by traffic police or captured by cameras, it constitutes a crime.
5
3
Share

How to Add Refrigerant Oil to Car Air Conditioning?

There are two methods for adding refrigerant oil to car air conditioning: the direct pouring method and the vacuum suction method. Direct Pouring Method: Pour the refrigerant oil into a clean measuring bottle and then directly pour it into the compressor's plug port. This method is suitable when replacing the evaporator, condenser, and receiver-drier. Vacuum Suction Method: 1. Evacuate the system to 100kPa; 2. Prepare a measuring cup with graduations and fill it with slightly more refrigerant oil than the required amount; 3. Close the high-pressure manual valve and the auxiliary valve, disconnect one end of the high-pressure hose from the manifold gauge set, and insert it into the measuring cup; 4. Open the auxiliary valve, and the oil will be sucked into the system from the measuring cup; 5. When the oil level reaches the specified graduation, immediately close the auxiliary valve.
17
2
Share

How to Troubleshoot ABS Light Illumination?

ABS light illumination troubleshooting methods: 1. Confirm the fault condition and symptoms; 2. Conduct a visual inspection of the system to check for brake fluid leaks, damaged wires, loose connectors, low brake fluid level, etc.; 3. Read the fault codes, either directly using a diagnostic scanner or by interpreting the warning light codes and then referring to the service manual for the corresponding fault conditions; 4. Based on the interpreted fault conditions, use necessary tools and instruments to conduct an in-depth inspection of the faulty area to confirm the fault location and cause; 5. Resolve the fault; 6. Clear the fault codes; 7. Check if the warning light remains illuminated. If the warning light stays on, there may still be a fault in the system, or the fault may have been resolved but the fault codes were not cleared.
18
1
Share

Can I drive when the car maintenance light is on?

You can drive when the car maintenance light is on, but you should get maintenance done as soon as possible. Car maintenance mainly includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance scopes. The purpose of car maintenance is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service cycle. Changing the engine oil is a common maintenance item. The engine oil mainly plays a lubricating role, and because it has a lifespan, it needs to be replaced regularly. The oil filter, also known as the oil purifier, functions to remove various impurities from the engine oil and ensure the normal operation of the lubrication system. The oil filter should be replaced together with the engine oil during an oil change.
13
5
Share

What is the normal tire pressure for a Fit?

The normal tire pressure for a Fit generally ranges from 2.3 to 2.8 BAR, and any value within this range is considered safe. However, during summer when temperatures are high, the tire pressure, which was initially within the normal range, may actually rise above 3.0 BAR after driving. Therefore, in summer, it is advisable to choose a lower tire pressure within the normal range, with 2.3 to 2.5 BAR being more appropriate. The body dimensions of the Fit are 4109 mm in length, 1694 mm in width, and 1537 mm in height, with a wheelbase of 2530 mm. The Fit features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam semi-independent suspension.
13
0
Share

Which cars can have their ECU flashed?

Generally, only cars equipped with turbocharged engines can have their ECU flashed, as cars with naturally aspirated engines will not experience any power increase after an ECU flash. Below is an introduction and method for flashing the ECU: Introduction to ECU Flashing: ECU flashing, also known as ECU upgrading, car computer upgrading, or ECU modification in China, is technically referred to as ECU tuning. The working principle of ECU flashing involves fine-tuning the fuel supply and ignition timing based on the original factory data by rewriting the program. ECU Flashing Method: First, read the original ECU data of the car, then make adjustments based on the factory program, and finally overwrite the original program with the adjusted ECU program. Some ECUs can be flashed directly through the car's OBD interface, while others require the ECU to be disassembled and flashed using specialized equipment.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.