How to Turn On the Reverse Camera Radar Sound for Civic?

1 Answers
AryaMarie
07/25/25 10:07am
Civic's reverse camera radar sound can be activated via the radar switch. Here are details about the radar switch: 1. During reversing, the reverse radar utilizes ultrasonic principles. Sensors mounted on the rear bumper emit ultrasonic waves that reflect off obstacles, calculating the actual distance between the vehicle and the obstacle. When the sensors indicate the vehicle is at a hazardous distance from an obstacle, the system alerts the driver through the display and buzzer. 2. If the reverse radar has no sound, the switch might be off. The reverse radar switch is marked with a 'P', accompanied by a signal icon and a triangular symbol next to the signal. 3. The reverse radar provides audible alerts without visual feedback, while the reverse camera offers visual feedback without sound alerts. Together, they complement each other, both aiding the driver in reversing. 4. The reverse radar's alert sound and frequency vary with the distance to the obstacle. The closer the obstacle, the louder and more frequent the sound; the farther the obstacle, the softer and less frequent the sound.
Was this review help?
1
2
Share
More Forum Discussions

Is It Normal for Wheel Brake Discs to Rust?

It is normal for car brake discs to rust. Here is a detailed introduction about it: 1. Slight rust: Slight rust often occurs. For example, after the car is left out in the rain overnight or after washing when the car is not dried properly, slight rust can easily form. In such cases, continuous braking while driving can help remove the rust, as the brake disc rubs against the brake caliper during braking, and the rust will be worn off after multiple brakes. 2. Severe rust: If the brake disc has severe rust, the entire surface of the brake disc will have a relatively thick layer of rust. Stubborn rust can also accelerate the wear of the brake pads, so it is necessary to take the car to a repair shop to have the brake disc polished.
8
4
Share

Is the Taurus an imported model?

The Taurus is not an imported model; it is a joint-venture vehicle. The Taurus is a luxury mid-size sedan under Changan Ford, available in three models: LX, GL, SE, and SHO. The vehicle's dimensions are 5019mm in length, 1854mm in width, 1425mm in height, with a wheelbase of 2756mm. It features an independent pneumatic-hydraulic front suspension with a stabilizer bar and a four-link independent pneumatic-hydraulic rear suspension with a stabilizer bar. The new Taurus adopts a hexagonal front grille design, complemented by chrome trim, seamlessly integrated with LED headlights. The rear features a chrome strip connecting the LED taillights, with symmetrically arranged chrome dual exhaust pipes that coordinate with the central LED fog lights. Additionally, the vehicle is equipped with 19-inch aluminum alloy wheels.
9
1
Share

What is the battery model for Lavida?

Lavida batteries come in two models: Fengfan 6QW60 and Bosch L2400. The original car battery has a lifespan of 3 to 4 years, and Volkswagen provides a 2-year warranty for the battery. In addition to regular maintenance at 4S stores, daily battery care is essential. When replacing or installing a Lavida battery, it is important to turn off the ignition switch and all electrical appliances before removing the battery. Lavida is Shanghai Volkswagen's first independently developed A-class car, which not only maintains the excellent quality of German design but also incorporates many aesthetic concepts reflecting traditional Chinese culture and cutting-edge design elements. The front face design of Lavida is significantly different from previous Volkswagen A-class cars, especially its unique teardrop-shaped headlights. In terms of body line design, Lavida features sharp waistlines while retaining a side profile similar to the Octavia, a design that facilitates easy access for rear passengers.
13
2
Share

Can the car be transferred if the owner is not present?

Vehicle transfer does not necessarily require the owner to be present. Below are the specific procedures for vehicle transfer: 1. Submit a relocation application: Go to the vehicle management office to submit an application for relocation, obtain a tracing number card, wait for the tracing, and specify whether it is for relocation or transfer. 2. Submit the required documents: Go to the corresponding window to submit the relocation authorization letter, the 'Motor Vehicle Transfer Application Form', the vehicle license, the vehicle plate, and other documents required by the local vehicle management office. Then pay the corresponding fees and obtain a receipt. 3. Collect the vehicle file: Three working days after submitting the plate, bring the receipt to the main office of the vehicle management office to collect the vehicle file, which includes the 'Motor Vehicle Transfer Application Form', the vehicle inspection form, the chassis number, the vehicle license, and vehicle photos. 4. Surrender the original plate and license: For vehicles that pass inspection, the original plate and license will be surrendered, and the change registration column on the license and the 'Motor Vehicle Registration Application Form' will be annotated with 'Transferred to the Vehicle Management Office of the Public Security Department (Bureau) of a certain province and city', stamped with the issuing authority's seal, and placed in the file along with the 'Motor Vehicle Transfer Notification', then handed over to the owner.
17
5
Share

Where does the vehicle body count as running a red light?

It is determined by capturing three photos with electronic cameras. The first photo shows the vehicle crossing the stop line at the intersection, including the red light and license plate number. The second photo shows the vehicle completely passing the stop line, including the red light and license plate number. The third photo shows the vehicle continuing to move, mainly by comparing the position change of the vehicle in the second photo, including the red light and license plate number. Capturing these three photos can determine that the vehicle ran a red light. Running a red light is clearly defined in the "Road Traffic Safety Law". Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Six situations of running a red light: Stopping immediately after crossing the line at a red light (when the red light is on, the vehicle cannot stop in time, and the front of the vehicle crosses the stop line): If the vehicle only just crosses the stop line during a red light but stops immediately, this act of running a red light will not be penalized. However, if there is obvious movement after crossing the line, it will be penalized. The three photos captured by the electronic eye for running a red light are: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when these three photos are complete will it be considered running a red light. According to Article 10 of the "Regulations on the Handling Procedures for Road Traffic Safety Violations", this will result in a deduction of 6 points. Running a red light under the direction of a traffic officer (the signal is red, but the traffic officer on duty indicates permission to pass): When there is a conflict between the traffic signal and the traffic officer's gesture, the driver must obey the on-site command of the traffic officer. If the driver runs a red light due to the traffic officer's on-site command, the driver can obtain a diversion certificate from the local traffic police station to avoid penalties. If the party disagrees with the penalty, they can appeal through administrative reconsideration or administrative litigation. Stopping after the entire vehicle body crosses the line at a red light (failing to brake in time, causing the entire vehicle body to cross the stop line): If the entire vehicle crosses the stop line and does not continue to move, this does not count as running a red light. Reversing after crossing the line (attempting to avoid penalties by reversing after crossing the line at a red light): Motor vehicles are not allowed to reverse at railway crossings, intersections, one-way roads, bridges, sharp curves, steep slopes, or tunnels. If a vehicle reverses illegally, it may be subject to a warning or fine. Mistakenly running a red light behind a large vehicle (due to the large vehicle blocking the view, following it through the intersection): Drivers must maintain sufficient visibility to see the traffic signals ahead and ensure a safe braking distance. Generally, if a motor vehicle is photographed following a large vehicle, it is because it rushed through the intersection to catch the signal. This behavior can only be penalized as running a red light. Passing through the intersection during a yellow light (passing through the intersection when the signal turns yellow): The traffic police department states that according to the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China", when the yellow light at an intersection is flashing, vehicles that have already crossed the stop line can continue to pass. If the yellow light is already on and the vehicle continues to rush through, it will be considered running a red light if photographed.
19
4
Share

What does TC mean in cars?

TC in cars stands for Traction Control System, which improves the vehicle's passability. When the ABS anti-lock braking system detects that some wheels are slipping, it applies braking to the slipping wheels to prevent the loss of traction on those wheels. When the system is active, a yellow TC indicator light on the dashboard flashes to alert the driver. TC: The full English name is Traction Control System, translated into Chinese as the anti-slip tracking control system. When the ABS anti-lock braking system detects that some wheels are slipping, it applies braking to the slipping wheels to prevent the loss of traction on those wheels. Traction Control System: Also known as the tracking control system. When a car brakes on a slippery surface, the wheels may slip, even causing loss of directional control. Similarly, during acceleration or sudden acceleration, the drive wheels may also slip, which can be dangerous on icy or other slippery surfaces by causing loss of directional control. The Traction Control System is designed to address this issue. The system relies on electronic sensors to detect when the driven wheels' speed is lower than that of the drive wheels (indicating slip), and then sends a signal to adjust ignition timing, reduce throttle opening, decrease fuel supply, downshift, or apply braking to the wheels, thereby preventing further slipping. The Traction Control System not only enhances driving stability but also improves acceleration and climbing ability.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.