How to Turn On the Rear Headlights of a Car?

1 Answers
MaggieLynn
07/25/25 5:09am
For all vehicles currently on the road, there are two methods to turn on the headlights. Below are the specific details: 1. Steering Wheel Combination Switch: On the left side, turning the turn signal switch forward activates the headlights. There are typically two settings: (1) Small lights; (2) Headlights. This method is commonly used in domestic and Japanese vehicles. 2. Dashboard Switch: On the left side of the dashboard, there is a larger headlight switch. To operate, rotate it to the right. The first position is for small lights, and the second position is for headlights. This type of switch is generally found in European and high-end vehicle models.
Was this review help?
10
5
Share
More Forum Discussions

What engine does the Geely GS use?

Geely GS uses a 1.3T turbocharged engine independently developed by Geely. The Geely GS is a compact 5-door, 5-seat SUV with body dimensions of 4440mm in length, 1833mm in width, and 1573mm in height, a wheelbase of 2700mm, a fuel tank capacity of 55L, and a curb weight of 1365kg. The front suspension of the Geely GS is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 141PS, a maximum power of 101kW, and a maximum torque of 235Nm, paired with a 6-speed manual transmission.
10
3
Share

What does the appearance of a faucet symbol on the car dashboard mean?

The appearance of a faucet symbol on the car dashboard indicates an engine malfunction. The reasons for the engine warning light to illuminate are: 1. Faulty spark plugs, ignition coils, fuel pump, or clogged fuel lines in the engine; 2. Poor contact in sensors such as coolant temperature, crankshaft position, air flow, intake temperature, or oxygen sensors; 3. Poor fuel quality causing engine wear, leading to the warning light activation; 4. Excessive carbon buildup can alter the engine's design parameters. The function of the engine is: to convert the thermal energy of gasoline or diesel into mechanical energy by expanding gases after combustion in a sealed cylinder, which pushes the pistons to perform work. Internal combustion engines typically transform chemical energy into mechanical energy.
11
3
Share

Can Tire Pressure Monitoring Be Transferred to Another Vehicle?

Tire pressure monitoring can be transferred to another vehicle by installing the monitoring system onto the other vehicle's tires and configuring it accordingly. The functions of tire pressure monitoring include: 1. Preventing accidents; 2. Extending the service life of tires; 3. Reducing wear on the suspension system. Tire pressure monitoring automatically and continuously checks the tire pressure while the vehicle is in motion, alerting the driver to leaks or low pressure to ensure driving safety. The working principle of tire pressure monitoring involves a built-in sensor installed on the tire's hub. This sensor contains a bridge-type electronic pressure sensing device that detects air pressure, converts the pressure signal into an electrical signal, and transmits the signal via a wireless transmitter.
16
1
Share

What Does Car Programming Mean?

Car programming, also known as automotive computer programming, is used to convert and store program chips. Below is more related information: 1. Introduction to ECU Tuning: The simplest method of car modification involves using a conversion and storage program chip. When replacing chips with different programming, you only need to open the ECU's back panel, remove the original chip, and replace it with a new one. Since some older E-ROM chips can only be written once, each time the program is modified, a blank chip must be burned with the new program using a burner to replace the original chip. In recent years, many new car ECUs use Flash-Rom (flash memory) chips that can be read and written multiple times, allowing direct program loading without replacing blank chips. 2. Advantages: Regardless of the type of chip, both the original manufacturer and chip tuners incorporate protective designs to prevent decoding and copying. Therefore, during modification, the chip tuner must first upload each car's data to the chip manufacturer for verification of the vehicle identification number, ECU code, year, and specifications. Only after the data is confirmed will the relevant program be downloaded to the tuner's computer. The technician then uses a burner to write the data into a blank chip or updates the Flash-Rom chip program in the ECU via the port originally used to connect to the manufacturer's diagnostic computer. This form of ECU modification does not provide any adjustment flexibility for enthusiasts, but it is convenient and time-saving, making it highly suitable for stock cars with no or only minor engine modifications (including intake and exhaust systems).
1
0
Share

What are the precautions for using car air conditioning?

Precautions for using car air conditioning are: 1. Do not set the temperature too low; 2. Control the direction of the air outlet; 3. Do not use it for a long time; 4. Turn on high air volume appropriately; 5. Turn off the air conditioning when driving at low speed. The components of car air conditioning are: 1. Compressor; 2. Condenser; 3. Evaporator; 4. Liquid storage dryer; 5. Expansion valve. Car air conditioning adjusts and controls the temperature, humidity, air cleanliness, and air flow in the car compartment to a suitable state, providing a comfortable riding environment for passengers and reducing fatigue during the journey; it creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device.
2
2
Share

What Happens If the Exhaust Pipe Is Blocked?

The consequences of a blocked exhaust pipe include: 1. The car experiences difficulty in acceleration, with the engine RPM and speed struggling to increase; 2. Automatic transmission vehicles are forced to frequently downshift; 3. The engine's power output decreases, leading to excessive exhaust emissions; 4. The engine may shake, the malfunction indicator light may turn on, and the engine may frequently stall; 5. The exhaust pipe temperature continuously rises, potentially reaching the ignition point of nearby components and causing spontaneous combustion. The exhaust pipe is installed between the engine exhaust manifold and the muffler, providing flexible connection for the exhaust system to reduce vibration and noise. Maintenance methods include: 1. Preventing water from entering the inside of the exhaust pipe; 2. Applying anti-rust oil inside the exhaust pipe; 3. Regularly inspecting the condition of the exhaust pipe.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.