How to Turn on the Rear Fog Light of a Car?

1 Answers
CalebLynn
07/30/25 1:21am
The method to turn on the rear fog light of a car is by rotating the light lever on the left side of the steering wheel. For some models, the fog light switch is located in the light control assembly under the dashboard and needs to be pressed to activate. The prerequisite for turning on the rear fog light is that the parking lights or the vehicle's headlights must be on. The replacement method for the car's rear fog light is as follows: 1. Open the vehicle's trunk and remove the fixing screws on both sides of the luggage compartment; 2. Loosen the fixing screws of the rear wheel fenders, pry open the clips under the car, and then pry open the tail light clips; 3. After removing the rear trim panel, check for any wire harness connections, then remove the rear fog light trim panel; 4. Install the fog light socket onto the original trim panel and connect the wire harness.
Was this review help?
5
3
Share
More Forum Discussions

What Causes the Clutch Disc to Burn Out?

The clutch burns out due to the driver pressing the clutch pedal for extended periods, prolonged semi-engagement, excessive throttle during starts, or substandard clutch disc materials leading to premature damage. Generally, clutch burnout is closely related to improper driving habits. Over time or with excessive mileage, the clutch disc naturally ages and wears out. Inferior clutch disc materials can cause early failure. Overloading the clutch results in abnormal wear between the clutch disc, pressure plate, and flywheel, generating excessive heat that burns out the clutch disc. A burnt clutch disc often emits a distinct burnt odor.
17
4
Share

How Long After Expiration Can a Driver's License Not Be Renewed?

According to relevant legal regulations, the validity period of a motor vehicle driver's license is 6 years, 10 years, or long-term. You should apply for renewal at the vehicle management office where the driver's license was issued within 90 days before its expiration. If a motor vehicle driver fails to renew the license within one year after its expiration, the license will be automatically canceled by the system. Here is more related information: Notes: 1. Before renewing the driver's license, you must handle all traffic violation records; otherwise, the renewal cannot be processed. 2. The renewal must be processed within 90 days before the driver's license expires; otherwise, it cannot be done online. 3. If the driver's license has been expired for no more than 3 years, it can still be renewed. However, the longer it is overdue, the more complicated the renewal process will be.
8
3
Share

Where is the clutch disc located?

The clutch disc is located between the engine and the transmission. The clutch pressure plate is fixed to the engine flywheel, and the clutch disc sits between the engine flywheel and the pressure plate. As a crucial component of the drivetrain system, the clutch disc features splines in its center that secure a driveshaft. The driveshaft on the clutch disc serves as the power input shaft of the transmission, connecting the engine to the transmission. Being a wear-prone part, the clutch disc requires regular replacement. With increasing mileage, the clutch disc will gradually wear out. If the clutch disc wears beyond a certain point, slipping will occur.
12
4
Share

What is the ECON function of the Accord?

The ECON in car air conditioning is actually an energy-saving mode of the air conditioning system. ECON only takes effect when the air conditioning cooling is turned on. The air conditioning compressor is driven by the engine and can consume up to 20% of the engine's power. After activating the ECON mode, the vehicle will reduce the air conditioning power while ensuring cooling performance, thereby achieving fuel-saving effects. The method to turn on the air conditioning economy mode is very simple. The owner only needs to press the "ECON" button after turning on the air conditioning. When the button light is on, the air conditioning cooling system is turned off, and only natural air or warm air is provided. The introduction of the car air conditioning ECON mode is as follows: Usually, the car air conditioning has an A/C indicator to represent the air conditioning being turned on or off, while ECON only works when the air conditioning cooling is turned on, representing the economy mode of the air conditioning. In this state, the compressor will also work. Compared with the normal mode, the control point of the compressor is increased, and the compressor does not remain engaged continuously during operation. The start and stop points of the compressor are controlled by the evaporation temperature. In normal mode, the compressor's start-stop point is 2~4°C. In ECON mode, the compressor's start-stop point is 8~10°C. The lower the temperature, the longer the compressor's working time and workload. Activating the ECON mode will save engine power output and fuel consumption. The functions of car air conditioning: Achieve cooling effects through the continuous phase change cycle of the refrigerant; Remove dust, odors, smoke, and toxic gases from the car's interior air, making the air fresh, and humidify the car's interior air to increase its relative humidity; Use the engine coolant, waste heat, or heat generated by a burner as a heat source for heating, which is then blown into the car's interior or exterior air by a blower to raise the outlet air temperature for heating purposes; Draw in fresh external air for ventilation and air exchange, which also helps prevent windshield fogging. Precautions for using air conditioning in the car: Do not set the air conditioning temperature too low. A large temperature difference between the inside and outside of the car can easily cause the driver to catch a cold, and excessively low temperatures may also pose a risk of arthritis for passengers. Control the direction of the air outlet. Based on the principle that cold air sinks and hot air rises, when controlling the air conditioning outlet, you can follow the rule of pointing the outlet upward when cooling and downward when heating. Do not turn on the air conditioning immediately after the car has been exposed to the sun. After the car has been exposed to the sun, the interior temperature will be very high. First, open the windows for ventilation, and then turn on the air conditioning after the hot air has been expelled.
13
5
Share

What Material is the Clutch Friction Plate Made of?

Clutch friction plates are primarily made of composite materials. The main material of the friction plate is asbestos-based friction material, while some clutch plates are made of semi-metallic materials and composite fiber materials, and others use ceramic fiber materials. The clutch is a crucial component in the transmission system, located between the engine and the gearbox, capable of connecting or disconnecting the engine from the gearbox. When the clutch pedal is pressed, the clutch disengages, and when the clutch pedal is released, the clutch engages. The clutch pressure plate is fixed to the engine flywheel, with the clutch plate beneath it. The clutch plate has splines in the middle, which secure a drive shaft. This drive shaft serves as the power input shaft for the gearbox.
9
1
Share

Does the 'E' on the fuel gauge indicate a full tank?

The 'E' on the fuel gauge does not indicate a full tank. Here is some extended information: 1. Methods to indicate fuel level: The 'F' on the car's fuel gauge stands for 'FULL' in English, representing a full tank, which can be translated as 'complete.' The 'E' stands for 'Empty,' indicating low fuel. When the needle points closer to the 'F' direction, it means there is more fuel; the closer it is to 'E,' the less fuel remains. Many car fuel gauges also have a red section near 'E,' indicating that the fuel is running low and should be refilled promptly. 2. Precautions for fuel tank usage: Before a long trip, the more fresh fuel you have, the better the acceleration feels during high-speed driving. If the car is rarely used, it is recommended to keep the fuel level low and not exceed the upper limit of the tank. Do not use your phone at the gas station—leave it in the car or turn it off. Also, avoid re-entering the vehicle while refueling.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.