···
Log in / Register

How to Turn On the Rear Fog Light of a Car?

4 Answers
LeRosalie
07/29/25 8:32am
To turn on the rear fog light of a car, you need to rotate the light lever located on the left side of the steering wheel. In some car models, the fog light switch is part of the lighting control assembly under the dashboard and requires pressing to activate. The prerequisite for turning on the rear fog light is that the parking lights or the headlights of the vehicle must be switched on. The replacement method for the rear fog light is as follows: 1. Open the trunk of the vehicle and remove the fixing screws on both sides of the luggage compartment; 2. Loosen the fixing screws of the rear wheel fenders, then pry open the clips under the vehicle and the tail light clips; 3. After removing the rear trim panel, check for any wiring harness connections, then remove the rear fog light trim panel; 4. Install the fog light socket onto the original trim panel and connect the wiring harness.
Was this review help?
5
3
Share
ColtonAnn
08/12/25 5:46am
I've been driving for over a decade and have encountered many foggy situations. Turning on the rear fog lights is actually quite simple, but many people haven't figured it out. There's usually a switch on the left side of the steering wheel or in the middle of the dashboard marked with a fog light icon, like a small tail with fog. You need to turn on the headlights first, otherwise pressing that button might not work. Some cars have a rotary knob—just turn it to the rear fog light position and it'll light up. I remember once driving on a mountain road during heavy rain with dangerously low visibility; I quickly turned on the rear fog lights so others could see my position from afar, which made things much safer. Don't use them unnecessarily—only in heavy fog or rain to avoid dazzling others. Get into the habit of checking the switch position so you're not fumbling in critical moments.
Was this review help?
2
1
Share
Expand All
Richardson
10/05/25 6:57am
As a car enthusiast, I really enjoy studying these little details. The rear fog light is usually activated via a headlight control stalk or a separate button. First, make sure the engine is running after ignition, then turn on the headlights, and locate the rear fog light symbol on the control stalk—it's a square icon with wavy lines. Press or toggle the stalk once, and the rear fog light will activate. There are significant differences between car brands: German cars often integrate it on the left stalk, while Japanese cars may use a knob on the dashboard. In principle, it's a high-intensity red light designed to make your car more noticeable to vehicles behind you in low-visibility conditions. Don't overuse it—only turn it on during fog or heavy rain to avoid causing confusion for other drivers. During regular maintenance, also check the bulb's condition and replace it promptly if it's burnt out.
Was this review help?
13
0
Share
Expand All
Axel
11/18/25 8:28am
I believe safety comes first when driving, especially with rear fog lights. Here's how to turn them on: First, turn the key to the On position and start the car. Then, switch on the low beam headlights, and locate the control near the steering wheel—it might be a button or a small knob marked with a rear fog light symbol. Press it, and the light will activate. I often take my kids on highways, and during heavy fog, it's essential to use them to increase visibility. Remember, only use them when necessary—avoid turning them on during clear weather or at night, as they can blind drivers behind you. If your car is older, the switch might be worn out, so check it first. Keep a small flashlight in your car for emergency inspections if the switch fails. Safety is no small matter—pay attention to the details.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

What's the matter when the brake pedal is hard and the car won't start?

The reasons why the brake pedal is hard and the car won't start: 1. The car's vacuum booster pump is leaking or malfunctioning; 2. There are too many impurities in the brake master cylinder, poor sealing, vacuum booster pump failure, or dirty brake fluid; 3. Mixed brake fluid causes vapor lock after heating, leakage in the brake master or slave cylinder, or air leakage in the air tank or pipeline interface; 4. Improper operation leading to mechanical failure. Correct braking methods: 1. When driving at low speed and encountering sudden events ahead, emergency braking can be applied by pressing the brake pedal firmly; 2. During normal driving conditions, gradual braking is recommended. Press the clutch pedal while releasing the accelerator pedal, shift to a lower gear, and after the speed decreases, release the clutch pedal and press the brake pedal until the car stops; 3. On long downhill slopes in mountainous areas or situations where continuous braking may cause high temperatures, intermittent braking by alternately pressing and releasing the brake pedal can effectively prevent the braking system from overheating.
16
2
Share

Can a Vehicle with a Temporarily Seized Vehicle License Be Driven on the Road?

A vehicle with a seized vehicle license cannot be driven on the road. Driving on the road requires two documents: a driver's license and a vehicle license, both of which are indispensable. Driving a motor vehicle during the period when the driver's license is temporarily seized will be penalized as driving without a license. Legal Basis: Article 95 of the "Road Traffic Safety Law" states that if a motor vehicle driven on the road does not display a motor vehicle license plate, does not have an inspection qualification mark or insurance mark, or does not carry the vehicle license or driver's license, the traffic management department of the public security organ shall detain the motor vehicle, notify the party to provide the corresponding license, mark, or complete the relevant procedures, and may impose penalties in accordance with Article 90 of this Law. If the party provides the corresponding license, mark, or completes the relevant procedures, the motor vehicle shall be promptly returned. The vehicle license is the "identity proof" of a motor vehicle. It consists of the "People's Republic of China Motor Vehicle License" and the "People's Republic of China Motor Vehicle License Supplementary Page." The license records information such as the license plate number, vehicle type, the owner's personal (or organizational) name, address, vehicle brand and model, usage nature, technical data of the vehicle's manufacture, and the issuance date of the document, among other relevant details.
6
1
Share

What are the car names with the word 'Jie'?

Car names with the word 'Jie' include Porsche, Jaguar, Jetta, and Luxgen. Porsche: Porsche is a world-renowned luxury car brand under the German Volkswagen Group, also known as Porsche, headquartered in Stuttgart, Germany, and is one of the main representatives of European and American automobiles. Main models include the 911, 718, Boxster, Cayman, Panamera, Cayenne, and Macan. Jaguar: Jaguar is a well-known British luxury car brand, founded in 1922 by Sir William Lyons, and is now part of India's Tata Group. In the Chinese market, Jaguar offers three major product lines: the X series luxury sports sedans, the TYPE series luxury sports cars, and the PACE series luxury coupe SUVs. Jetta: Jetta is a car brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of the German Volkswagen Group in China. Its first product, the Jetta (Jetta-MK1), was launched in Europe in 1979. Luxgen: Luxgen (Hangzhou) Automotive Co., Ltd. is a subsidiary jointly established by Taiwan's largest automobile company, Yulon Group, and a mainland Chinese partner. Luxgen is positioned as an 'independent brand, innovative technology, latecomer advantage, leading the world.'
11
5
Share

Is Car Touch-Up Painting Done in Whole or Partial Sections?

Car touch-up painting can be done either in whole or partial sections depending on the situation. Whole-section painting: The reason for performing whole-section painting in car touch-ups is to prevent the painted area from peeling off. The repair scope needs to be determined for car touch-up painting: carefully inspect the damaged area. If the damage exceeds one-third of the component, a blending repair method should be adopted. Blending repair involves applying clear coat to the entire component while transitioning the base coat from the damaged area to the original paint, thus maximally preserving the original car paint and avoiding color mismatch issues. This is because when one-third of the area is damaged, processes like sanding, primer application, base coat, clear coat, and blending will cover over two-thirds of the component, leaving very little original area - making spot repair meaningless. Partial-section painting: For partial spraying, if the topcoat color can be adjusted very accurately, it would facilitate the repair. However, in practice, it's extremely difficult to perfectly match the touch-up paint color with the old paint color. Even with identical composition, color difference may still occur after spraying. To minimize color discrepancy between new and old paint, experienced automotive painters have accumulated extensive practical knowledge over years of practice to reduce color differences in partial touch-up painting to the minimum.
4
0
Share

Can the wheel size of a car be modified?

Modifying the wheel size of a car is not allowed, as altering the wheels without prior approval from the traffic management authorities is illegal. If you must change the wheels, you can consult 4S staff to understand the maximum size of wheels that can be replaced, so as to choose the appropriate tires; otherwise, it may affect the annual vehicle inspection. According to regulations, any changes to the body color, model, performance, purpose, and structure of a licensed motor vehicle, including replacing the frame, body, or engine, require the owner to apply for a modification registration with the vehicle management office. The annual inspection refers to a comprehensive safety check conducted every year or every two years, covering all aspects such as the horn, brakes, axle weight, chassis, ignition system, lighting system, exhaust system, and license plate installation.
5
5
Share

Can Coilover Suspension Pass Annual Vehicle Inspection?

Coilover suspension cannot pass the annual vehicle inspection. Before modifying a vehicle, the detailed modification plan must be submitted to the traffic management department for review, and the modification can only be legally carried out after approval. According to regulations, the owner of a registered motor vehicle must apply to the vehicle management office at the place of registration for modification registration in any of the following circumstances: 1. Changing the body color; 2. Replacing the engine; 3. Replacing the body or frame; 4. Replacing the entire vehicle due to quality issues; 5. Changing the use nature of the vehicle, such as converting a commercial vehicle to a non-commercial vehicle or vice versa; 6. The owner's residence moves out of or into the jurisdiction area of the vehicle management office.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.