How to Turn On the Rear Air Conditioning in a Passat?

What is the displacement of Jetta?

The displacement of Jetta VA3 is 1498mL, while the displacement of Jetta VS7 and Jetta VS5 is 1395mL. These data are officially released, and owners who have purchased Jetta vehicles can also check them on the configuration sheet. The displacement of Jetta refers to the volume of the air-fuel mixture inhaled by each cylinder of the engine during the intake stroke, and the displacement is directly proportional to the power. Generally, the larger the displacement of Jetta, the more energy the engine releases per unit time. The Jetta VA3 is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 112Ps, a maximum power of 82kW, a maximum power speed of 6100rpm, a maximum torque of 145Nm, and a maximum torque speed of 4000rpm. It is paired with a 5-speed manual transmission. The Jetta VS7 and Jetta VS5 are equipped with a 1.4T turbocharged engine, with a maximum horsepower of 150Ps, a maximum power of 110kW, a maximum power speed of 5000-6000rpm, a maximum torque of 250Nm, and a maximum torque speed of 1750-3000rpm. They are paired with a 6-speed automatic manual transmission.

4

Share

How many times a year should a private car be inspected after 15 years?

Private cars after 15 years need to be inspected twice a year. Here is the relevant introduction about vehicle annual inspection: 1. Time: For small cars and blue license plate minivans, within the first six years after new car registration, they need to be inspected every two years; after six years, it becomes once a year; after ten years, once a year; and after fifteen years, twice a year. For trucks, after registration, they need to be inspected once a year, and after ten years, twice a year. 2. Regulations: If a vehicle is found by traffic police on the road without annual inspection, the owner will be fined or the vehicle will be impounded. At the same time, in the insurance contract, vehicles that have not been inspected in time are considered unqualified, and once a car accident occurs, no compensation will be provided.

14

4

Share

Why does the left corner get pressed during left reverse parking?

It depends on the situation. If reversing from the right towards the center, pressing the left line means the steering wheel was turned too late. If reversing from the left towards the center, pressing the left line means the steering wheel was turned too early. Here is some related information about reverse parking: 1. Techniques: Align the mirror and turn right fully. When starting the first reverse parking maneuver, observe the position relationship between the left rearview mirror and the parking line. First, turn the steering wheel half a turn to the right and start moving. When the left rearview mirror covers the parking line, turn the steering wheel fully to the right. While reversing with the steering wheel turned fully to the right, watch the right rearview mirror. Observe the distance between the car body and the right front corner of the parking space, keeping it at about 30 cm. If it's too narrow, adjust the steering. The standard width of a parking line is 15 cm, so in the rearview mirror, it should appear roughly as two parking line widths. 2. Precautions: Generally, start in 1st gear and make sure not to shift incorrectly. While controlling the speed, turning the steering wheel as quickly as possible is always better. If there's a conflict between the two, prioritize controlling the speed.

13

1

Share

How to Engage the Reverse Gear in a Jetta?

To engage the reverse gear in a Jetta, press down slightly and then pull forward to the left. Here are some gear-shifting precautions: 1. During normal driving: You can achieve fuel efficiency by lightly pressing the accelerator to reach the shift RPM, releasing the accelerator, and then pressing it again. 2. Neutral gear: Remember not to coast in neutral. 3. N gear: For automatic transmission vehicles, the N gear is used for short stops when the vehicle is completely stationary. 4. P gear: The P gear should only be used when the vehicle is fully stopped; otherwise, the mechanical parts of the automatic transmission may be damaged.

3

5

Share

What is the gear shift stick called?

The stick used for shifting gears in a car is called the gear shift lever or control lever. Here is some related information about gear shifting: 1. Concept: Gear shifting is the abbreviation for "transmission lever operation method." It refers to the driver's psychological and physiological movements to continuously change the position of the transmission lever based on road conditions and vehicle speed changes. Generally, the term "transmission lever operation method" is limited to the "transmission lever" itself. 2. Technical requirements: The technical requirements for gear shifting can be summarized in eight words: timely, correct, smooth, and quick. Timely means mastering the appropriate time to shift gears—neither shifting up too early nor shifting down too late. Correct means the coordination of the clutch pedal, accelerator pedal, and gear shift lever must be accurate and harmonious, with precise positioning. Smooth means that after shifting into a new gear, the clutch pedal should be engaged smoothly and promptly. Quick means the action should be swift to shorten the shifting time, reduce the loss of vehicle kinetic energy, and lower fuel consumption.

18

4

Share

What to Do If You Buy an Accident-Damaged Car from a 4S Store?

You can file a complaint with the local Bureau of Industry and Commerce. According to the "Consumer Protection Law," you can demand a refund and triple compensation. If negotiation fails, you can sue in court. Here is some relevant information about accident-damaged cars: 1. Definition of an Accident-Damaged Car: An accident-damaged car refers to a vehicle that has suffered damage due to non-natural wear and tear, resulting in a decline in mechanical performance and economic value. Generally, an "accident-damaged car" refers to a vehicle with structural damage. Additionally, water-damaged cars and fire-damaged cars also fall under the category of "special accident-damaged cars." 2. Methods to Identify an Accident-Damaged Car: Methods to identify an accident-damaged car include exterior inspection, headlight inspection, checking insurance records, and examining the interior. 3. Conditions for Quick Accident Handling: The conditions for quick accident handling are: no personal injuries, no disputes among the parties involved regarding accident liability, the accident-damaged car can still be driven, all parties involved have vehicle insurance, and the parties are willing to go to a designated location for damage assessment.

13

2

Share

How to Turn On the Rear Air Conditioning in a Passat?

What is the displacement of Jetta?

How many times a year should a private car be inspected after 15 years?

Why does the left corner get pressed during left reverse parking?

How to Engage the Reverse Gear in a Jetta?

What is the gear shift stick called?

What to Do If You Buy an Accident-Damaged Car from a 4S Store?

Is an Appointment Required for Subject 4?

Is Wearing a Hat Allowed in the Subject 1 Exam?

What Causes Weak Airflow from Car Air Conditioning?

How to Reset the Jaguar Tire Pressure Warning Light?