How to Turn on the Rain-Sensing Wipers on the Tuyue?
4 Answers
Here are the steps to turn on and use the rain-sensing wipers on the Volkswagen Tuyue: 1. Pull the lever backward to spray windshield washer fluid for the front wipers. 2. The higher you lift the wiper switch, the faster the frequency. LOW means low-speed gear, and HIGH means high-speed gear. 3. The OFF position is to turn off the switch. Turn to this position when the wipers are not in use. 4. 1X: When the gear is shifted to this position, it will automatically rebound, and then the wiper will work once. Precautions for using wipers are as follows: 1. Keep clean: You can sprinkle alcohol on a towel and wipe the surface of the wiper strip. It is recommended to regularly check and clean the wiper blades to keep them in a clean state. 2. Check the rubber: In case of slight wear, you can take a piece of sandpaper and polish the uneven surface. 3. Stay away from sunlight: When the vehicle is not used for a long time, try to park it in a cool place. 4. Replenish liquid: To ensure the longevity of the machine parts, be sure to use regular windshield washer fluid. Pay attention to timely refilling of windshield washer fluid during driving. 5. Remove frost: After heavy snow, the wipers of outdoor vehicles will be frozen. At this time, you should manually clean the frost on the glass surface. Forcibly turning on the wipers will not only cause bending and deformation of the mechanical structure, wear of the wiper strips, and scratches on the glass, but also may burn out the wiper motor.
Activating the rain-sensing wipers on my Volkswagen Tharu is quite straightforward. After starting the car, locate the wiper stalk on the right side of the steering wheel. Push it upward one notch or to the AUTO position (depending on the model year – post-2020 versions usually have it labeled as AUTO). A gentle push is all it takes, and the wiper icon will illuminate on the instrument cluster, indicating activation. Don't worry about erratic movements – the system relies on a rain sensor at the top of the windshield that detects precipitation and automatically adjusts wiper speed, eliminating manual adjustments. Need to tweak sensitivity? The stalk features a rotary knob or button (e.g., rotating between fast/slow settings). Test it during rain to fine-tune based on intensity for optimal performance. Pro tip: Keep the sensor clean to prevent dust from obstructing detection. Newer models may require initial system activation via settings. This feature shines during long drives or heavy downpours, enhancing safety and convenience. For deeper understanding, consult the owner's manual.
As an ordinary car owner, let me tell you that activating the Touareg's rain-sensing wipers is effortless. First, get in the car and start the engine, then look at the small lever on the right side of the steering wheel—we call it the wiper stalk. Simply push it all the way up to the top or to the position marked AUTO, one push is all it takes, and the dashboard will immediately display an indicator light. This smart sensing technology works via a sensor on the front windshield, automatically activating the wipers when it rains, with speed adjusting to the intensity of the rainfall. Personally, I find it quite convenient, especially in heavy rain when you don’t need to distract yourself—it's much better than manual operation. Just remember not to block the camera area, and if it gets dirty, wipe it gently with a soft cloth. New drivers might want to try it out in a safe place, like during light rain, to see how it works and appreciate its benefits once they get familiar with it.
Operating the Touareg's automatic wipers is straightforward: After starting the car, locate the right-hand stalk on the steering wheel and push it all the way up to the automatic position. The dashboard will display an icon to confirm activation. The system uses sensors to detect rainfall intensity and automatically adjusts wiping frequency, eliminating manual adjustments. From my experience, test the sensitivity during rain - if it feels too slow or fast, simply twist the adjustment knob on the stalk. It's quite effective, but avoid using it unnecessarily when parked.
