How to Turn on the Low Beam of Honda City?

1 Answers
Hayley
07/29/25 2:40pm
Honda City low beam activation method: The high/low beam switch is controlled by the turn signal lever. Moving the lever left/right activates turn signals, while moving it up/down switches between high and low beams. Typically, pushing down activates high beams, and pulling up turns on low beams. The low beam is used for short-range illumination with a limited range of 30-40 meters, and its focus cannot be adjusted. The Honda City measures 4450mm in length, 1695mm in width, and 1477mm in height, with a wheelbase of 2600mm. Its engine delivers a maximum horsepower of 131ps and peak torque of 155nm.
Was this review help?
16
2
Share
More Forum Discussions

How to Identify Whether Tire Pressure is Normal?

Identifying whether tire pressure is normal can be done through the following steps: 1. Locate the standard tire pressure value in the maintenance manual or on the inside of the car door, usually referring to the half-load tire pressure; 2. Unscrew the tire valve cap and press the tire pressure gauge onto the valve; 3. Continue observing the pointer to read the measured tire pressure value; 4. Compare the measured value with the standard tire pressure. If the pressure is too high, press the deflation valve button on the tire pressure gauge; if the pressure is too low, inflate the tire promptly. Tire pressure refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and engine damage will lead to the end of the car's life. Tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the car's performance and power.
5
5
Share

Is Lynk & Co a subsidiary of Geely?

Lynk & Co is a brand under Geely. Here is more information about Lynk & Co cars: 1. Lynk & Co is a new era premium brand jointly established by Geely Holding, Geely Auto, and Volvo Cars. It was officially launched in Berlin on October 20, 2016. 2. Since its establishment, Lynk & Co has successively released the Lynk & Co 01, Lynk & Co 02, and Lynk & Co 03, all of which have received widespread acclaim. The Lynk & Co 01, developed based on the CMA basic modular architecture, was officially launched on November 28, 2017; the Lynk & Co 02 was officially launched on June 28, 2018; and the Lynk & Co 03 was officially launched at the Fuji International Speedway in Japan on October 19, 2018.
17
2
Share

How to Turn Off the Golf Maintenance Reminder?

Golf maintenance reminder deactivation steps are: 1. Turn off the ignition switch to shut down the vehicle; 2. Use your left index finger to press and hold the reset button below the instrument panel, which looks like two zeros with a dot in between; 3. Then use your right hand to turn on the ignition switch, keeping the left hand pressing the reset button until the English words for maintenance service appear on the instrument panel, then release the button; 4. After releasing, press the reset button below the instrument panel again within 30 seconds; 5. After completing the above steps, the maintenance reminder light will be cleared; 6. If the maintenance reminder still appears after turning on the ignition switch, repeat the previous steps. The Volkswagen Golf is a classic hatchback compact family car introduced by FAW-Volkswagen. It is one of the most produced models by Volkswagen and also one of the brand's best-selling vehicles.
11
4
Share

What does the China IV emission standard mean?

China IV emission standard is the fourth stage national standard for motor vehicle pollutant emissions. The main pollutants emitted by vehicles include hydrocarbons, nitrogen oxides, carbon monoxide, and particulate matter. Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, it controls and reduces vehicle emissions to below specified levels. The sixth stage national standard for motor vehicle pollutant emissions is established to implement the Environmental Protection Law of the People's Republic of China and the Air Pollution Prevention and Control Law of the People's Republic of China, aiming to prevent pollution from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The fifth stage national standard for motor vehicle pollutant emissions is referred to as the China V standard, which is equivalent to the fifth stage emission standard currently implemented in Europe.
4
4
Share

How to reset the fuel gauge on the Lynk & Co 03?

The method to reset the fuel gauge on the Lynk & Co 03 is: 1. Turn on the power; 2. Press the small square button on the upper left side of the instrument panel twice for more than 2 seconds to reset it. The Lynk & Co 03 is a compact 4-door 5-seater sedan with body dimensions of 4639mm in length, 1840mm in width, 1472mm in height, and a wheelbase of 2730mm. It is equipped with a 1.5T turbocharged engine and a 6-speed manual transmission, delivering a maximum power of 115 kW and a maximum torque of 245 Nm. The drive system is front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
9
4
Share

What is the fuel consumption of Mazda Atenza?

Mazda Atenza has different fuel consumption depending on the model. According to data feedback from some car owners online, the details are as follows: 1. Equipped with a 2.0L 158 horsepower L4 engine: the model matched with a 6-speed automatic transmission has an average fuel consumption of 8.11 liters/100 kilometers, with a range of 6.99~9.23 liters/100 kilometers. A total of 3,216 car owners participated in the test. 2. Equipped with a 2.5L 192 horsepower L4 engine: the model matched with a 6-speed automatic transmission has an average fuel consumption of 8.67 liters/100 kilometers, with a range of 7.55~9.78 liters/100 kilometers. A total of 5,343 car owners participated in the test.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.