How to turn on the low beam lights of the Sagitar?

1 Answers
StKevin
07/30/25 10:11am
The method to turn on the low beam lights of the Sagitar: The left-hand lever on the steering wheel is the turn signal switch, which also functions as the high/low beam switch lever. Pushing the lever upward turns on the low beam lights, while pushing it downward activates the high beam lights. When in the low beam position, lifting the lever upward again will switch to high beam, but this is a momentary function—releasing it will revert back to low beam. The Sagitar is a compact car under FAW-Volkswagen, with dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, and a wheelbase of 2731mm. In terms of exterior design, the Sagitar features an added chrome trim on the lower character line of the body side, connecting the front and rear bumper chrome strips, creating a more fluid visual effect. The rear also adopts a horizontally stretched design, with two horizontal lines on the widened trunk lid seamlessly integrating with the taillights and rear bumper.
Was this review help?
5
5
Share
More Forum Discussions

Is There Any Danger When the Charger Makes Abnormal Noises?

It is normal for the charger to make abnormal noises, and there is no danger. The charger contains a fuse. If the temperature or voltage is too high, the electronic tube may burn out, but it will not explode. The sound from the charger could also be the noise of the current during charging. If the noise is too loud, you can replace it with a charger of the same model. More details about car chargers are as follows: Correct Charging Methods: Do not charge immediately after riding. The lifespan of lithium-ion batteries is determined by the number of charge-discharge cycles. The more charge-discharge cycles, the faster the lifespan decreases. Therefore, you should not charge the electric vehicle every time after riding. Instead, charge it when the battery reaches 60%-70% of its maximum range. It is best to use a smart socket. Many electric vehicle users charge their vehicles when they get home from work and unplug the charger when they leave for work the next day. However, most chargers cannot guarantee 100% automatic power-off when the battery is fully charged. The best solution is to purchase a smart socket and set the charging time, which can address the issue of resting peacefully at night. Be cautious of plug overheating during charging. Loose 220V power plugs or charger output plugs, as well as oxidized contact surfaces, can cause the plug to overheat. Prolonged overheating may lead to short circuits or poor contact, damaging both the charger and the battery. Therefore, be vigilant about plug overheating during charging. If this occurs, promptly remove the oxides or replace the connector. Charging during the day is safer. When charging a newly purchased electric vehicle for the first time, the battery should be fully charged. However, full charge and overcharging are entirely different. Electric vehicles have relatively standard indicator lights, and different models and battery standards may prompt the dealer to provide different suggestions. At the same time, charging during the day makes it easier to control the charging time and reduces the risk of battery-related safety issues such as fires. Solutions for Abnormal Noises: The solution for a charger making a squeaking noise during charging is to use a syringe to apply a small amount of engine oil or other lubricant to the fan shaft, which should resolve the issue.
10
0
Share

What is the wading depth of a Corolla?

The wading depth of a Corolla is approximately 300mm. The wading depth of a Corolla is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of a Corolla is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water entering the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Follow the path taken by other vehicles, drive at a low speed, and avoid sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to judge the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, avoid entering the water and choose an alternative route.
16
4
Share

How to Deal with Violation Code 1087?

Violation code 1087 refers to unauthorized modification of the vehicle's appearance and registered technical data, resulting in a 0-point deduction and a fine of 500 yuan. Common violation codes and penalties are as follows: 1001: Driving an assembled motor vehicle on the road, no points deducted, fine of 2000 yuan. 1229: Motor vehicle violating prohibition sign instructions, 2 points deducted, fine of 100 yuan. 1728: Driving a school bus on roads outside highways at more than 50% over the speed limit, 12 points deducted, fine of 2000 yuan. 4701: Reversing on a highway, 12 points deducted, fine of 200 yuan. 5005: Forging or altering motor vehicle insurance signs, no points deducted, fine of 3000 yuan. 5010: Using forged or altered motor vehicle inspection qualification signs, no points deducted, fine of 3000 yuan. 5701: Using forged or altered motor vehicle license plates, 12 points deducted, fine of 5000 yuan. 6035: Driving a motor vehicle under the influence of alcohol after previous penalty for the same offense, no points deducted, fine of 2000 yuan. 13030: Motor vehicle driving in the opposite direction, 3 points deducted, fine of 200 yuan. 17170: Driving a motor vehicle on the road without displaying a license plate, 12 points deducted, fine of 200 yuan. Violations can be handled via the "Traffic Management 12123" mobile app as follows: Step 1: After logging into the "Traffic Management 12123" app, go to [Business Center] → [Violation Handling] to enter the violation handling process. Step 2: Select the motor vehicle with pending violations to view the list of unprocessed violations. Click on the corresponding violation record to see detailed information. Step 3: After selecting the violation record to be processed, click [Process and Pay]. Carefully read the violation handling instructions and click [Read and Agree] to proceed to the confirmation page for the violation record and payment method selection. Step 4: After clicking confirm, proceed to the payment page and complete the payment.
16
5
Share

Is the xrv engine an Earth Dreams engine?

xrv engine is an Earth Dreams engine. The dimensions of the xrv are: length 4328mm, width 1772mm, height 1610mm, with a wheelbase of 2610mm, minimum ground clearance of 130mm, fuel tank capacity of 50 liters, and a curb weight of 1225kg. The xrv features a front McPherson independent suspension and a rear torsion beam suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 131ps, maximum power of 96kW, maximum torque of 155Nm, paired with a 6-speed manual transmission.
13
2
Share

What is the Difference Between Extended-Range and Hybrid Vehicles?

The differences between extended-range and hybrid vehicles are as follows: 1. Different driving modes. Hybrid vehicles mainly switch between the motor and the engine to ensure the engine always operates optimally. The engine can both generate electricity and drive the vehicle. Plug-in hybrids also switch between the motor and the engine in hybrid mode, but for short-distance travel, they can operate purely on electric power, with the engine completely inactive. 2. Charging requirements. Hybrid vehicles do not require charging and rely entirely on the switching between the motor and the engine to achieve optimal fuel efficiency. Plug-in hybrids can be charged, and under short-distance commuting conditions, if charging is convenient, they can function entirely as electric vehicles, only using the gasoline engine for long-distance travel.
1
0
Share

Where is the car coolant located?

Car coolant is located in the coolant reservoir on the right side of the engine compartment. The steps for adding coolant are: 1. Open the driver's door of the car; 2. Pull the hood release lever; 3. Lift the engine hood; 4. Secure the engine hood with the support rod to ensure stability and prevent accidents during operation; 5. Slowly unscrew the radiator cap to release internal high-pressure gas; 6. Add coolant to the reservoir until it reaches the MAX mark. Precautions for using car engine coolant: 1. Different types of antifreeze should not be mixed; 2. Do not open the radiator cap or drain valve immediately after driving; 3. When replacing coolant, ensure all old antifreeze is completely removed and the radiator is thoroughly cleaned.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.