How to Turn on the Low Beam Headlights on Qoros 3?

1 Answers
SanParker
07/30/25 4:49am
On the Qoros 3, there is a rotary switch on the left side of the steering wheel that controls the fog lights and low beam headlights; Simply switch the control to the low beam position to turn on the low beam headlights, and the dashboard will display the low beam indicator icon.
Was this review help?
17
5
Share
More Forum Discussions

How to Activate the Window Closing Function with Car Key?

The method to activate window closing with the car key is: 1. Locate the power window button on the driver's door; 2. Lightly lift or press the window switch until the window fully opens, then continue holding the switch until the window fully closes. After the window is closed, lightly pull the button for two seconds to complete the activation. Precautions for using the car key include: 1. Release the car key immediately after starting the engine, as keeping it turned can damage the engine belt; 2. Do not hang the car key together with accessories, as collisions with accessories can gradually widen the gap in the keyhole; 3. Avoid exposing the car key to high temperatures or contact with liquids.
14
3
Share

What does a triangle exclamation mark on the car dashboard mean?

A triangle exclamation mark on the car dashboard indicates a general fault in the vehicle. Other exclamation marks that may appear on the dashboard include: 1. An exclamation mark inside a circle with brackets, which is the brake system warning light; 2. An exclamation mark with a horizontal line below the brackets, which is the tire pressure monitoring warning light. This light turns on when the pressure in one of the vehicle's tires is too low. Common dashboard indicator lights include: ABS indicator, EPC indicator, seat belt indicator, battery indicator, oil pressure indicator, fuel level indicator, door indicator, airbag indicator, brake pad indicator, handbrake indicator, coolant temperature indicator, engine indicator, turn signal indicator, high beam indicator, windshield washer fluid indicator, fog light indicator, and width light indicator.
9
4
Share

How to Turn Off the Rear Wiper on an Audi Q3?

The method to turn off the rear wiper on an Audi Q3 is: turn off the ignition switch and push the wiper lever downward. The Audi Q3 is a compact SUV under FAW-Volkswagen Audi, with body dimensions of length 4481mm, width 1848mm, height 1616mm, a wheelbase of 2680mm, a fuel tank capacity of 60L, and a trunk capacity of 450L. The Audi Q3 is equipped with a 1.4T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 150hp, a maximum power of 110kW, and a maximum power speed range of 5000 to 6000 rpm.
3
5
Share

What to Do When a Vehicle Runs Out of Battery?

Approaches for a vehicle running out of battery: 1. Push-start method: One person pushes the vehicle from behind while another inside depresses the clutch and engages the gear. Once reaching a certain speed, ignite the engine while applying throttle, then quickly depress the clutch pedal after the engine starts. 2. Jumper cable method: Find a normally functioning vehicle, position both cars facing each other, open the hoods and use jumper cables to connect positive to positive and negative to negative terminals. Reasons for a vehicle running out of battery: 1. Dead battery; 2. Spark plug malfunction; 3. Fuel filter failure; 4. Electrical circuit fault; 5. Mechanical failure; 6. Engine carbon buildup.
18
3
Share

What is the maintenance interval for a vehicle?

Vehicle maintenance intervals are typically 6 months, 8 months, or 12 months, depending on the brand and model of the car. The specific maintenance schedule can be found in the owner's manual. Maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of a vehicle, also known as automotive upkeep. The benefits of car maintenance include: 1. Ensuring the vehicle operates in optimal condition; 2. Improving vehicle efficiency and reducing wear on parts and tires; 3. Enhancing driving safety; 4. Preventing potential hazards caused by vehicle malfunctions; 5. Reducing noise and environmental pollution; 6. Keeping the vehicle's appearance clean and preventing damage.
12
0
Share

How to Solve Carbon Deposit Issues in Sedans?

The solutions for carbon deposit issues in sedans are: 1. Add fuel additives appropriately; 2. Clean the throttle valve regularly; 3. Reduce prolonged idling; 4. Avoid using low-quality gasoline. The causes of carbon deposits in sedans are: incomplete combustion of fuel in the engine, where the paraffin and gum substances in gasoline that cannot be fully burned remain in components such as the fuel injector, throttle valve, fuel lines, and spark plugs, forming deposits under high temperatures. The hazards of excessive carbon deposits include: 1. Affecting the air intake, leading to reduced power; 2. Preventing gasoline from fully atomizing, resulting in incomplete combustion; 3. Causing engine knocking.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.