How to Turn on the Low Beam Headlights of Volkswagen Lavida?
3 Answers
The method to turn on the low beam headlights of Volkswagen Lavida is to use the light combination switch located on the left side of the steering wheel. Rotating the switch forward one notch turns on the dashboard lights, rotating it another notch turns on the low beam headlights, and rotating it one more notch turns on the high beam headlights. Below is some relevant information about low beam headlights: 1. Low beam headlights are short-range lighting devices designed with a wide illumination range (160°) and a short illumination distance, and the focus cannot be adjusted. 2. When driving at night on roads without lighting conditions, low beam headlights can be used if the speed is below 30 kilometers per hour; if the speed exceeds 30 kilometers per hour, high beam headlights must be used instead of low beam headlights. 3. When driving through well-lit road sections at night, low beam headlights should be used.
As a seasoned driver with over a decade of experience, let me explain in detail how to operate the low beams on the Lavida. In Volkswagen models, the light controls are typically located on the left-hand stalk near the steering wheel, featuring a rotary switch at the top. Turn it clockwise with your finger, and you'll see a green low beam indicator light up on the dashboard. If you turn it too far, it'll switch to high beams—just gently rotate it back half a notch. Remember to turn on the lights after starting the vehicle to avoid putting extra strain on the battery. In poor visibility conditions like rainy days, it's advisable to turn on the front fog lights along with the low beams—just press the button at the end of the stalk after setting it to the low beam position. Regularly checking the cleanliness of the light covers is also crucial, as dusty covers can significantly reduce lighting effectiveness.
Last time when helping my sister adjust the Lavida's lights, I discovered a handy trick: After sitting in the driver's seat but before ignition, turn the knob at the top of the left control stalk from OFF to the low beam icon position. At this point, the daytime running lights will turn off while the low beams automatically activate. Here's the key point - Volkswagen vehicles feature automatic headlights. When the knob is set to AUTO position, the low beams will automatically turn on when ambient light dims. If you forget to turn off the lights when shutting down the engine, the system will beep to alert you. When encountering alternating light conditions like tunnels or garages, I've developed a habit of turning the knob to low beam position two seconds in advance - it's faster and more reliable than waiting for the auto-sensing function.
