How to turn on the low beam headlights of the Qoros 5?
3 Answers
The method to turn on the low beam headlights of the Qoros 5 is: use your fingers to pull the control lever located below the left side of the steering wheel towards you to activate the low beams. Pushing it forward once will switch to the high beams. The Qoros 5 is a compact 5-door, 5-seat SUV. Taking the 2019 Qoros 5 as an example, its body dimensions are: length 4600mm, width 1869mm, height 1658mm, wheelbase 2710mm, minimum ground clearance 180mm, and fuel tank capacity 55 liters. The 2019 Qoros 5 is equipped with a 1.6T turbocharged engine, delivering a maximum power of 145kW and a maximum torque of 290Nm, paired with a 7-speed dual-clutch transmission.
Turning on the Qoros 5's low beam headlights is quite straightforward. When I drive this car, I usually operate it from the driver's seat. There's a light control stalk on the left side of the steering wheel—just twist it, typically rotating to the second or third position to activate the low beams. If the car has an automatic mode, the lights will turn on based on ambient light after setup, but manually adjusting it is more reliable. Remember to test the lights at dusk or in tunnels to ensure safer nighttime driving. The light switch isn't strenuous to operate, and the Qoros 5 responds quite responsively. I also recommend regularly checking the bulb condition—if one burns out, it could lead to trouble at night. Overall, this operation is much more convenient than older car models, and even beginners can get the hang of it quickly.
The low beam operation of the Qoros 5 primarily relies on the left-hand stalk on the steering wheel. After starting the vehicle, locate the small stalk and rotate it clockwise or counterclockwise to select the position: typically the off position, parking light position, and low beam position. Having driven similar models, I find the Qoros 5's design intuitive—simply turn to the low beam position to activate the lights. Remember to turn them on early during night driving to ensure clear visibility and avoid disturbing others. If the lights flicker or fail to illuminate, there may be an issue with the bulb or wiring, requiring prompt inspection. In daily use, manual adjustment tends to be more energy-efficient than full-auto mode, though the automatic setting is quite convenient.
