···
Log in / Register

How to Turn on the Lights of Volkswagen Lavida?

3 Answers
LeJoel
08/28/25 7:56am
To turn on the lights of the Volkswagen Lavida: 1. Rotate the light control switch on the left side of the steering wheel one notch forward to turn on the position lights; 2. Rotate the light control switch inward twice to turn on the low beam; 3. Push the light control switch forward to turn on the high beam; 4. Lift the light control switch forward and upward to turn on the right turn signal, and push it downward to the left to turn on the left turn signal. The dimensions of the Volkswagen Lavida are: length 4605 mm, width 1765 mm, height 1460 mm, wheelbase 2610 mm, trunk volume 472 liters, fuel tank capacity 55 liters. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission.
Was this review help?
10
3
Share
DelJameson
09/10/25 6:05am
I've been driving for several years, and the light switch for the Lavida is on the lever to the left of the steering wheel. After starting the car, first look at the knob at the very top: turn it to the first position for the parking lights, suitable for use during dusk when it's slightly dark; turn it to the second position for the low beams, which are essential for night driving. If you want to turn on the high beams, push the entire lever toward the front of the car while the low beams are on, and a blue icon will light up on the dashboard. For fog lights in foggy conditions, there's a separate button on the side of the lever—press it once for the front fog lights and again for the rear fog lights. Everyone knows how to use the turn signals—just flick the lever up or down. Oh, and remember to switch back to low beams when encountering oncoming traffic to avoid blinding them. Before parking and turning off the engine, always turn the knob back to the OFF position to prevent draining the battery. The design is quite user-friendly, much better than those cars where you have to search through the central control screen for ages.
Was this review help?
13
4
Share
Expand All
ChaseDella
10/24/25 6:57am
When my friend first bought his Lavida and asked me how to operate the lights, I said it's super simple. Find the control stalk on the left side of the steering wheel - turn the top knob halfway to turn on the parking lights, and a full turn for the headlights. When driving on the highway at night needing high beams, just push the entire stalk forward (it springs back to low beams when released). The fog light button is on the side of the stalk - press it to enhance illumination during rain or fog. Reverse lights automatically activate when backing up, and turn signals flash automatically when steering. But I must remind you: turn on lights 2 seconds before entering tunnels since eyes need time to adjust to sudden darkness. Also, cars with AUTO light settings are more convenient - headlights turn on automatically when light is insufficient, so you don't need to manually operate them when exiting garages at dusk.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

How to Deal with the 2021 Levin Taillights Staying On?

When the rear taillights of the car are on, it indicates that the brakes are applied, and they usually turn off when the engine is shut down. If the car is not locked, the lights will remain on. If the brake light is broken and does not turn off, you should go to a 4S shop to replace the brake light as soon as possible.
16
1
Share

Correct Methods for Running-in Period of Scooter Motorcycles

Warm up the engine for a few minutes before daily riding, 3-5 minutes in winter and 1-2 minutes in summer. The complete running-in period should be 3000KM, but keep the speed below 30KM within the first 1500KM. Change the oil at 300KM, 800KM, and 1500KM respectively.
14
2
Share

How to Adjust the Idle Speed of a Scooter?

Start the scooter and let it warm up to normal temperature, then locate the idle speed screw. Use a screwdriver to remove the right side cover of the scooter. Some models may not require removing the cover for adjustment, depending on individual circumstances. When the scooter has warmed up to normal operating speed, you can adjust the idle speed as needed by rotating the idle speed screw with a flat-head screwdriver.
3
1
Share

How to Re-pair the Tire Pressure Monitoring System?

With the tires properly inflated, simply press the 'set' button located on the vehicle's center console to re-pair and reset the tire pressure monitoring system. Some vehicle models do not require manual pairing. After adjusting the tire pressure back to the normal value, driving for approximately 5~10 minutes will automatically restore the system.
12
0
Share

Correct Steps for Starting and Parking the Teana?

Start the car by pressing the brake pedal, release the brake to warm up the engine. Wait until the RPM drops to 1,000, then press the brake and shift from P to D gear before releasing the foot brake to start moving. When parking, firmly press the brake and shift from D to P gear, engage the parking brake, and finally turn off the engine.
8
3
Share

How to Manually Reset the Maintenance Light on a Suzuki SX4?

First, turn on the ignition switch of the Suzuki Swift. Then, press and hold the indicator selection button on the right side for more than 5 seconds. The instrument display will flash "OIL" once and then continue to display "OIL". Release the indicator selection button and quickly press the button five times consecutively within 2 seconds. After "OIL" flashes three times and then turns off, the reset operation is completed.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.