How to turn on the lights of Qoros 5?
2 Answers
The method to turn on the lights of Qoros 5 is: The light control lever is located at the lower left side of the steering wheel. Rotating the lever sequentially activates the following functions: automatic mode, lights off, parking light mode, and headlight mode. The light control lever of Qoros 5 also integrates the front and rear fog light switches. To turn them on, pull the control lever outward: one pull for the front fog lights and another pull for the rear fog lights. To turn them off, push the lever back in. The turn signals are integrated on the exterior rearview mirrors. It is necessary to activate the turn signals in advance when preparing to change direction. To signal a left turn, push the light control lever downward once; for a right turn, push it upward once. In terms of body dimensions, the Qoros 5 measures 587mm in length, 1869mm in width, 1676mm in height, with a wheelbase of 2697mm.
My Qoros 5 has been running for three years, and the light switch is located on the control stalk to the left of the steering wheel. Rotate that knob to adjust: one twist turns on the parking lights, and a second twist activates the low beams. For high beams, simply push the stalk forward, and a blue indicator light will illuminate on the dashboard to remind you. To temporarily flash the high beams as a warning to the car ahead, pull the stalk toward you—it will automatically reset when released. I usually keep it on the AUTO setting, which automatically turns on the lights when entering tunnels or during rainy weather, making it very convenient. Note that there’s a separate rear fog light button next to the light knob—press it in rainy or foggy conditions, and a red indicator light will confirm it’s on. The system automatically turns off the lights when you shut off the engine and exit, but manually activated high beams should be turned off yourself.
