How to Turn on the Leiling Headlights?

[OLorenzo]

Method to turn on the Leiling headlights: Use the control lever on the left side of the steering wheel. The default state after turning on the headlights is the low beam. Push it forward once to switch to the high beam. If it cannot be pushed forward in the default state, it means the high beam is already on. The Leiling is a compact car with body dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. In terms of power, the Leiling is equipped with a 1.2T 116-horsepower L4 engine, paired with a CVT continuously variable transmission, delivering a maximum power of 85 kW and a maximum torque of 185 Nm.

[LaCourtney]

Having driven the Leiling for so long, operating the headlights is quite intuitive: locate the control stalk on the left side of the steering wheel, which has a rotary knob. Gently turn it to the 'auto' position, and it will automatically turn on based on the ambient light. For manual mode, twist to the second position for parking lights and the third for full headlights. When driving at night, pushing the stalk can flash the high beams to alert vehicles ahead. Don’t overlook regular checks on bulb conditions—over time, they can burn out and affect visibility. I remember one rainy night when turning on the lights in time made a big difference; safety really depends on these small details. Make it a habit to test the lights before starting the car, and wipe the lens clean if it’s foggy to avoid unclear road visibility.

[VanMaria]

Turning on the headlights of the Leiling is effortless. Just rotate the small lever near the driver's seat. I prefer using the auto function—it activates the lights automatically at night, making it hassle-free when entering or exiting underground parking lots. For manual operation, simply twist it to the 'on' position—easy as that. When driving daily, turning on the lights in advance is crucial, especially during nighttime or gloomy weather, as it enhances safety. I often remind my friends that there's no harm in turning on the lights early—it helps prevent rear-end collisions or accidents. Also, don’t forget to check the headlight angle adjustment; you can adjust the height in the settings to ensure the beam doesn’t blind other drivers.

[EthanLee]

Operating the Levin headlights primarily involves the turn signal lever: rotate the knob once to select either auto or manual mode for easy activation. This design is common; remember to use it on dimly lit roads to reduce risks. The auto mode is the most convenient, sensing changes in light conditions to automatically turn the lights on and off. Avoid speeding with lights off and comply with regulations to ensure safety. Regularly check the brightness of your lights and clean any dirt promptly to maintain optimal performance.

[Willow]

Turning on the lights in the Levin is straightforward: rotate the knob on the left-hand steering column stalk to select modes—'Off' to turn lights off, 'Auto' for automatic, 'Position lights' or 'Full headlights'. Push the stalk to toggle high beams for flashing signals. Most new Levin models come with Auto headlights for convenience; in manual mode, choose settings based on conditions—e.g., low beams in urban areas, high beams on highways. Beam adjustment is available in the vehicle settings to maintain clear nighttime visibility. Occasionally check fuses to prevent malfunctions and avoid sudden light failures.

[Clay]

The Leiling's headlights are controlled by the left stalk knob: turn it to the desired position to easily turn on the lights. If it doesn't work, the switch might be stuck or there could be a bulb issue; checking the fuse is also necessary. For daily use, prioritize the auto mode to extend component lifespan; test the lights at night to ensure they function properly—don't wait until you need them to find out they're faulty. Clean the headlight surface to prevent fogging, improving brightness and range. Develop the habit of checking the lights before driving to prevent issues and ensure safety.