How to Turn on the High Beam on the Cavalier?

[VonMaddox]

The method to turn on the high beam on the Cavalier: The switch is located on the lower left side of the steering wheel. To activate the high beam, push the lever forward. Generally, it is not advisable to use high beams when driving in the city because urban areas usually have good lighting conditions. The high angle of the high beams can easily dazzle oncoming drivers and pedestrians, affecting their vision, which is unsafe and considered impolite driving behavior. The Cavalier's dimensions are 4474mm in length, 1730mm in width, and 1471mm in height, with a wheelbase of 2600mm. The front track is 1494mm, and the rear track is 1498mm. The engine delivers a maximum horsepower of 125Ps, a maximum power of 92kW, and a maximum torque of 180Nm.

[DelGeorge]

Last time I helped a friend adjust the Chevy Cavalier's lights, I found the operation very intuitive. First, ensure the vehicle is powered on or started. There's a control lever below the steering wheel on the left side, find the light symbol area. Turning clockwise, the first position is the parking lights, and the second position is the low beams. Then, push the lever toward the steering wheel, and the blue high beam indicator will light up on the dashboard. To temporarily flash the lights to alert the car in front, gently pull the lever toward yourself and release to let it snap back. At night, remember to check the dashboard prompts—the blue icon indicates the high beams are on, and you should switch back to low beams when meeting other cars to avoid dazzling them.

[DiTalia]

To activate the high beams on the Chevrolet Cavalier, follow these three steps: After starting the car, first turn the light knob to the low beam position (the one with the diagonal line symbol), then gently push the lever located below the left side of the steering wheel forward with your left hand. A 'click' sound indicates it's locked, and the blue high beam symbol on the dashboard confirms successful activation. High beams offer better penetration during rainy night drives, but avoid overuse. To turn them off, pull the lever back or simply turn the knob to shut off the headlights. Chevrolet's design is quite user-friendly, allowing for easy blind operation once familiar.

[April]

Simply operate the control lever. After ignition, turn the lighting lever on the left rear side of the steering wheel outward two notches to activate the low beams, then push the entire lever fully toward the front of the vehicle. At this point, a blue high beam indicator will illuminate on the instrument cluster. To switch back to low beams, push the lever once more. When needing to alert vehicles ahead, quickly pull the lever toward yourself (commonly known as flashing the high beams) without keeping the high beams continuously on.