How to Turn on the High Beam on a Civic?

Will parking the car outside during a heavy rainstorm have any impact?

Generally, if a car is parked outside during a heavy rainstorm, there should be no major issues for a normal vehicle, as standard cars have good sealing. However, parking a car outdoors during a heavy rainstorm depends on the location—avoid low-lying areas to prevent waterlogging and potential flooding. It’s also important to regularly check the vehicle’s drainage channels for blockages. To minimize damage during heavy rainstorms, avoid parking your car in the following locations: 1. Avoid parking in low-lying areas: The biggest concern during heavy rain is urban waterlogging, which can lead to vehicle submersion. Avoid parking in low-lying areas, as these are the primary spots for water accumulation. Examples include underground parking lots, under overpasses, downhill roads, and potholed areas—all of which pose safety risks. 2. Do not park under trees: Heavy rainstorms are often accompanied by strong winds, increasing the risk of branches or tree trunks falling onto the car. 3. Avoid parking near potentially hazardous structures: In windy conditions, parking near billboards, utility poles, or walls can also pose safety risks.

12

0

Share

What is the reason for the right window of the Focus not being able to go up or down?

The reason the right window of the Focus cannot go up or down is due to a damaged window regulator motor. Precautions for using the window are as follows: 1. Clean the window glass: Dirty window glass not only affects appearance and visibility but also impacts the opening and closing of the power window. To prevent rainwater from entering the car, a rubber strip is attached to the upper part of the window frame, which is also the area that frequently contacts the glass. Excessive dirt on the glass increases friction with the rubber strip, affecting the window's operation, so it is essential to keep the glass clean. 2. Lubricate the lifting mechanism: The main reason for the power window switch not operating smoothly is often the depletion of lubrication oil inside the door's lifting mechanism. Therefore, the lifting mechanism should be regularly oiled and lubricated. 3. Check the rubber supports: After lubricating the lifting mechanism, inspect the rubber parts supporting both ends of the glass. If the glass slides poorly, apply a rubber protector.

10

0

Share

Why was the hill start removed from the manual transmission driving test (Subject 2)?

The removal of the hill start from the manual transmission driving test (Subject 2) is aimed at enabling faster acquisition of a driver's license. Below are the differences between manual and automatic transmissions: 1. Learning duration: Manual transmission vehicles are more complex than automatic ones, resulting in different learning periods. Typically, learning to drive a manual transmission takes at least one month longer than an automatic. Due to the greater difficulty, the pass rate for manual transmission license tests is also lower. 2. License types: A manual transmission license is classified as C1, whereas an automatic transmission license is C2. Holders of an automatic transmission license (C2) cannot drive manual transmission vehicles, but manual transmission license (C1) holders are permitted to drive automatic transmission vehicles. 3. Cost: Because manual transmission is more challenging to learn and has a lower pass rate, its tuition fees are generally cheaper compared to automatic transmission courses, which tend to be more expensive.

13

3

Share

How often should a 2010 vehicle undergo annual inspection?

A 2010 vehicle requires an annual inspection every five years. Here are some important considerations regarding vehicle annual inspections: 1. Clear any traffic violation records in advance: Traffic violations are a must-check during vehicle inspections. If there are any outstanding violation records, the inspection materials will be directly rejected. Therefore, make sure to handle any violations from the previous and current years before the inspection. 2. Choosing good weather is crucial: Avoid rainy or snowy days for inspections, as adverse weather conditions can affect the accurate testing of the vehicle's braking performance. 3. Check for the presence of a fire extinguisher or warning triangle in the trunk: While there is no unified regulation, some regions require a fire extinguisher, while others may not. It's advisable to carry one as a precaution, as it can also serve as a preventive measure in daily use. A warning triangle, however, is mandatory.

9

4

Share

Will the Engine Stall if I Press the Brake in First Gear Without Depressing the Clutch?

Will the Engine Stall if I Press the Brake in First Gear Without Depressing the Clutch? The engine will stall if you press the brake in first gear without depressing the clutch. Here are some important points to note about gear shifting: 1. Master the Timing of Gear Shifting: Gear shifting should be timely, accurate, smooth, and quick. When starting the car, generally use the low gear (first gear). After starting, as long as road conditions permit, quickly and timely shift up to higher gears. Generally speaking, higher gears are more fuel-efficient than lower gears. Therefore, after starting, shift up promptly and avoid driving in a gear that is too low for the speed. Do not force the car to drive in a high gear on slopes or when the speed drops; also, avoid using a lower gear for prolonged driving under good road conditions. 2. Control the Throttle and Clutch Pedal During Acceleration: When shifting gears, pay attention to the coordination between the clutch pedal, throttle, and gear lever. The gear lever must be firmly pushed into place to ensure the gears are fully engaged, preventing gear damage or the transmission from automatically disengaging while driving. The key to upshifting lies in increasing the speed before shifting. The throttle should be "steadily increased" and "quickly released." After starting in first gear, you can shift to second gear without "revving the engine"; when shifting from second to third gear, lightly press the throttle to engage third gear. In subsequent upshifts, gradually increase the throttle pressure, but avoid excessive acceleration.

7

0

Share

What to Do If the License Plate Gets Deformed?

If the license plate is slightly deformed, you can repair it yourself or take it to a repair shop; if the damage is severe, you will need to replace it with a new license plate. Whether repairing it yourself or at a shop, be careful not to damage the fonts or paint on the plate. If it cannot be repaired, visit the local vehicle management office, where you can usually receive a new license plate within 3-5 working days. Additional details are as follows: 1. License plate background colors: Generally, they are blue, yellow, white, or black. 2. Blue: Used for small passenger vehicles (including light-duty trucks). 3. Yellow: Used for large vehicles, agricultural vehicles, training vehicles, and prototype test vehicles. Motorcycles also use yellow plates. 4. White: Used for special vehicles (such as military, police, or racing vehicles). 5. Black: Used for vehicles brought into the country by foreign individuals or enterprises.

4

5

Share

How to Turn on the High Beam on a Civic?

Will parking the car outside during a heavy rainstorm have any impact?

What is the reason for the right window of the Focus not being able to go up or down?

Why was the hill start removed from the manual transmission driving test (Subject 2)?

How often should a 2010 vehicle undergo annual inspection?

Will the Engine Stall if I Press the Brake in First Gear Without Depressing the Clutch?

What to Do If the License Plate Gets Deformed?

What to Pay Attention to When Applying for a Driving School

How to Determine Whether Car Engine Oil Needs to Be Replaced?

Do I Need to Renew My Expired Driver's License?

Is the speed limit for trucks on highways 80 or 90?