How to Turn on the High Beam of Toyota Vios?

[AdalynnAnn]

Toyota Vios high beam can be turned on by following these steps: 1. With the ignition switch on, rotate the control lever to the low beam position to turn on the low beam; 2. After the low beam is on, push the control lever forward to turn on the high beam. Taking the 2021 Toyota Vios as an example, it is a compact car with body dimensions of 4435mm in length, 1700mm in width, and 1490mm in height, with a wheelbase of 2550mm. The 2021 Toyota Vios is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 81kW at 6000rpm and a maximum torque of 138Nm, paired with a 5-speed manual transmission.

[VanSamantha]

When driving my Toyota Vios, I frequently operate the high beams. There's a light control lever on the left side of the steering wheel, which is simple and easy to use. First, start the car and turn the knob on the lever to turn on the low beams—the regular lights used for everyday driving. Then, gently push the entire lever forward, and the high beams will turn on, indicated by a small blue light icon on the instrument panel. To turn off the high beams, just pull the lever back or wait for it to reset automatically. This little trick is super useful on highways at night, allowing you to see hundreds of meters ahead. However, always remember not to abuse it on city roads or when there are oncoming vehicles to avoid dazzling others and causing accidents. I make it a habit to check the lever's flexibility before each drive to ensure it's not stuck or malfunctioning. If the lights aren't responsive, it might be due to bulb aging or wiring issues—I recommend visiting a repair shop promptly to maintain the car's safety performance.

[VonAriana]

As an experienced driver, let me teach you how to use the high beams on the Vios: After starting the vehicle, locate the lever with the light symbol on the left side of the steering wheel. First, rotate the low beam switch to activate the basic lighting, then push the lever forward while driving to engage the high beams. The entire process should involve smooth pushing and pulling to ensure the dashboard indicators are correct. High beams are suitable for temporarily improving visibility at night in rural or open road areas, but must be immediately switched back to low beams when entering urban areas or when other vehicles are present for safety. I've also noticed that the Vios system responds sensitively, with adjustable light brightness to suit different road conditions. Develop good habits by turning off the lights after parking to save fuel and extend component lifespan. If the lever feels loose, it may affect operation precision, so regular maintenance checks are recommended.

[LaEmilio]

Using the Vios to pick up and drop off kids for school, I'm very familiar with the high beam operation. Simply put, after settling in, first turn the switch on the left stalk near the steering wheel to turn on the low beams, then gently push the end of the stalk forward to activate the high beams. Normally, don’t use them unnecessarily—city streetlights are bright enough, so there’s no need to waste power. Only use them on dark suburban roads to see farther ahead. When pushing the stalk, don’t apply too much force to avoid damaging the connection point. I drive early every morning and only occasionally use high beams on highways to avoid getting a ticket. Remember to check the light icon on the dashboard to confirm the action. If the lights don’t turn on, check the fuse or bulb condition to save time and hassle.