How to Turn on the High Beam of Toyota Vios?
3 Answers
Toyota Vios high beam activation method: The high beam switch is located on the lever to the right of the steering wheel. Rotate the switch to the second position and push it forward to turn on the high beam. The high beam adjusts the intensity of the light based on the distance of the filament. The high beam focuses its light, emitting parallel rays that are more concentrated and brighter, capable of illuminating distant and high objects. The Toyota Vios has dimensions of 4300mm in length, 1690mm in width, and 1490mm in height, with a wheelbase of 2550mm, and features front-wheel drive. In terms of suspension, the front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
I've been driving this car for several years, and turning on the high beams of the Toyota Vios is quite simple: First, make sure the headlight switch is on, usually turned to the ON or AUTO position; then look at the control lever on the left side of the steering wheel, gently push it forward, and the high beams will light up. If you just want to flash them, pull the lever backward. Remember not to use high beams in the city to avoid dazzling others; it's safer to use them on highways or in dark areas. If they don't light up, check if the bulb is burnt out or if the fuse is blown. It's best to test them when starting the car to avoid issues at night. I always make it a habit to check before long trips to ensure clear visibility and safe driving—don’t underestimate this detail, as developing good habits can prevent big troubles.
When I first got my driver's license and learned to use the high beams, the instructor demonstrated in a Toyota Vios: After starting the car, turn the headlight switch to the 'on' position; then, there's a lever on the left side of the steering wheel—push it forward and you'll see the light beam extend further ahead. Pulling it back activates the flash, which I often use to alert the security guard when entering the neighborhood. Trying the high beams on the highway at night made the road signs appear crystal clear, but avoid using them recklessly in heavy traffic to prevent getting honked at. Learning these little tricks is great; all beginners should start practicing with this step first. Remember the switch positions and don't mix up the directions. Once you get the hang of it, your confidence doubles—safety always comes first, above all else.
