How to turn on the high beam of Qashqai?
2 Answers
The method to turn on the high beam of Qashqai is: On the light control lever at the lower left of the steering wheel, rotate the left knob clockwise by 2 gears to turn on the low beam, then push the light lever forward to activate the high beam. The following is an introduction about Qashqai: 1. Introduction: Qashqai, meaning "urban nomad", is the first work of Nissan European Design Center since its establishment, positioned between compact SUV and hatchback. However, unlike those Crossovers directly produced on car platforms, Qashqai is a product specially designed by Nissan for this unique market segment. 2. Power: Equipped with a 2.0L engine, maximum power output of 144 horsepower, peak torque of 198N·m, the transmission system is equipped with a CVT gearbox, and adopts a two-wheel drive mode.
Turning on the high beams of the Nissan Qashqai is actually quite intuitive. After sitting in the driver's seat, I usually first ensure that the light switch is set to either the automatic or manual position—the rotary knob is located near the instrument panel on the left side of the steering wheel. Then, holding the lever on the left side of the steering wheel, with the headlights already on, simply push the lever away from the steering wheel to switch to high beams. To switch back to low beams, just pull the lever back. Remember not to use high beams in urban areas or when there’s oncoming traffic, as it’s not only against regulations but also inconsiderate. I typically only use them on highways or dark rural roads. The Qashqai’s lighting system is quite smart—even in automatic mode, you can manually switch between beams. It’s a good habit to regularly check the headlight brightness to prepare for unexpected situations.
