How to turn on the high beam of Buick GL8?
2 Answers
The method to turn on the high beam of Buick GL8 is as follows: 1. The switch is located on the left front side of the steering wheel; 2. There is a round switch on the left side, turning it to the right and pulling it back will turn on the high beam. Taking the 2021 Buick GL8 as an example, its body dimensions are: length 5238mm, width 1878mm, height 1776mm, wheelbase 3088mm, fuel tank capacity 66l, and trunk capacity 475l. The 2021 Buick GL8 is equipped with a 2.0t turbocharged engine, with a maximum horsepower of 237ps, maximum torque of 350nm, maximum power of 174kw, and is paired with a 9-speed automatic manual transmission.
When I first got my Buick GL8, I was a novice driver. It took me quite a while to figure out how to turn on the high beams during my first night drive. The operation is quite simple: first, make sure the headlight switch is in the ON position or AUTO mode (if the car supports automatic headlights). I usually find the control lever on the left side of the steering wheel, gently push it forward (away from the steering wheel), and the high beams will turn on. Pulling it back to the original position switches to low beams. I remember initially pushing it the wrong way and almost flashing other drivers, but I got the hang of it after practicing on some rural roads. I also learned a tip: the GL8 has an automatic high beam assist system. When activated, it automatically turns on the high beams on open roads, saving manual operation. Of course, avoid using high beams in well-lit urban areas as it can blind oncoming traffic and cause trouble. Night driving is all about safety, so get familiar with the controls before hitting the highway.
