How to Turn on the High Beam in Lavida?
2 Answers
Lavida's high beam control switch is located on the combination light lever on the left side of the steering wheel. To turn on the high beam, first activate the low beam by rotating the light knob, then press the combination light lever downward to engage the high beam. The high beam indicator on the dashboard will illuminate simultaneously. Below are related instructions for Lavida's high beam: The procedure for replacing the high beam bulb in the Volkswagen Lavida is as follows: 1. After turning off the vehicle, wait for the engine to cool down completely before opening the engine hood to avoid burns from high engine temperatures. 2. After opening the hood, locate the dust cover of the headlight assembly, which is typically made of rubber. Remove the high beam dust cover to access the bulb base inside the headlight assembly, then disconnect the wiring harness connector. 3. Pinch the wire clip next to the base, and once the clip loosens, the bulb can be removed directly. 4. Install the new bulb, and please observe electrical safety precautions when handling electrical components.
When driving at night on dimly lit roads, I often need to use the high beams on my Volkswagen Lavida. After starting the car, first turn on the headlight switch, usually by rotating the knob or pressing the button on the left side of the steering wheel to activate the low beams. Then, gently push the left-hand stalk forward to switch to high beams—a blue indicator on the dashboard will light up as a reminder. Remember not to use high beams in urban areas or when facing oncoming traffic, as it can dazzle others and cause accidents; they're best suited for highways or unlit roads. For a quick flash to alert the car ahead, simply pull the stalk backward. Regularly checking for bulb wear is also crucial to ensure safe and smooth driving.
