How to turn on the high beam for the 10th generation Honda Civic?
4 Answers
The method to turn on the high beam for the 10th generation Civic is as follows: 1. Push the control lever on the left side of the steering wheel forward until you hear a click to turn on the high beam; 2. When the high beam is on, pull the control lever backward to switch back to the low beam; 3. Pull the control lever backward and then release it to flash the high beam. Additional relevant information is as follows: 1. Turn on the high beam when there are no street lights or visibility is poor at night; the low beam should be turned on when there are street lights at night, when encountering pedestrians on the roadside, or when driving on narrow roads, narrow bridges, or curves. 2. In terms of power, the 10th generation Civic is equipped with a 1.5L turbocharged engine, with a maximum horsepower of 177ps, a maximum power of 130kw, and a maximum torque of 220nm, paired with a continuously variable transmission.
Turning on the high beams of the Honda Civic 10th generation is quite intuitive. After driving the Civic for several years, I found that the control stalk on the left side of the steering wheel is the key—it's a combination lever for turn signals and lights. The steps are: first turn on the low beams (usually by rotating the knob to the ON position), then gently push the stalk upward to switch to high beam mode. After pushing, a small blue icon will light up on the instrument panel, indicating that the high beams are active. If you just want to flash the lights to alert others, simply pull the stalk toward you once. After completing the action, release it to let it return to its original position and turn off. I always recommend using high beams on empty roads at night to improve visibility, but avoid aiming them at oncoming vehicles to prevent glare and potential accidents. It's important to test the lighting system before each drive to avoid unexpected malfunctions.
As a new car owner, I was a bit confused at first, but operating the high beams is quite simple. On the lower left side of the steering wheel, there's a control stalk similar to the turn signal. Pushing it upwards activates the high beams—provided you've first turned on the low beams, which are usually controlled by a rotary knob near the dashboard for lighting modes. Once pushed up, a blue icon on the instrument cluster will indicate that the high beams are on. To turn them off, gently push the stalk downward or return it to the neutral position. If you need to briefly flash the high beams on the road, quickly pull the stalk toward yourself. I find this feature extremely practical, especially for nighttime highway driving where it helps you see farther ahead, but don't overuse it to avoid disturbing other drivers. Regularly checking your car's light settings is a good habit.
To operate the high beams on the 10th-gen Civic, simply push the lever. On the left-hand stalk behind the steering wheel, push upward to activate high beams (provided low beams are already on); push downward or return to center to deactivate. For a high beam flash, quickly pull the lever toward you. Remember to check the blue indicator on the instrument cluster after turning them on. Avoid unnecessary high beam usage in urban areas and maintain safe distances from oncoming traffic.
