···
Log in / Register

How to turn on the heating in Volkswagen Tiguan?

1 Answers
VonLondon
07/23/25 1:07pm
The method to turn on the heating in Volkswagen Tiguan: With the car running, turn on the interior circulation, turn off the AC switch, adjust the temperature control knob to the red heating zone, and then turn on the fan. The Tiguan is a compact SUV under Volkswagen, with dimensions of 4506mm in length, 1809mm in width, and 1685mm in height, and a wheelbase of 2684mm. The Tiguan is equipped with three engines: a 1.4L turbocharged engine, a 1.8L turbocharged engine, and a 2.0L turbocharged engine. The car is front-wheel drive, matched with a 7-speed dual-clutch transmission, with ventilated disc front brakes and disc rear brakes.
Was this review help?
15
4
Share
More Forum Discussions

Can Motorcycle Shock Oil Be Replaced with Engine Oil?

Ordinary engine oil cannot be used as a substitute for hydraulic oil in motorcycle shock absorbers. The reasons are explained below: Reasons: The viscosity of ordinary engine oil and hydraulic oil is different. If ordinary engine oil is used instead of hydraulic oil in the shock absorber, the damping effect will be significantly worse. Additional Explanation: Since the performance and functions of the two oils differ, engine oil is used in the engine's lubrication system, primarily for cooling and lubrication to prevent component overheating. Hydraulic oil, on the other hand, is mainly used in hydraulic systems for torque transmission, converting torque into force applied to the driven components. Due to their different roles, they cannot be used interchangeably.
17
0
Share

Does Overfilling Motorcycle Oil Affect the Vehicle?

Yes, overfilling motorcycle oil can have the following effects: Causes Oil Leakage: The high oil pressure can cause oil seals on the crankshaft to leak. Additionally, it affects heat dissipation and increases fuel consumption. Oil may enter the combustion chamber, burn, and produce blue smoke from the exhaust pipe, creating a false impression of oil burning. Causes Reduced Power: Increased resistance to oil circulation inside the engine raises internal gas pressure, creating a counterforce that reduces engine output power. When the piston moves downward, it accelerates cylinder wear and power loss. Oil may also enter the air filter, causing insufficient air intake and affecting combustion.
6
3
Share

Must the motorcycle license plate registration be done in person?

In some cases, it is not necessary. The relevant explanations are as follows: Introduction: For motorcycle license plate registration and other procedures, the owner does not need to handle them in person. They can be entrusted to an agent, except for applying for a replacement of the motor vehicle registration certificate. Legal Basis: Article 25 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" states that when the applicant's submitted documents and certificates are complete and comply with legal requirements, the vehicle management office shall accept them and review the applicant's eligibility for a motor vehicle driving license according to regulations. For eligible drivers, the vehicle management office shall arrange a test appointment as required; if no test is needed, the motor vehicle driving license shall be issued within one day.
6
0
Share

What are the reasons for no spark in a motorcycle spark plug?

Motorcycle spark plug no spark reasons are as follows: Reasons: Motorcycle spark plugs operate in high-temperature and harsh environments, making them one of the components more prone to damage. The absence of spark could be due to severe erosion of the spark plug, excessive carbon buildup causing spark leakage and malfunction; overly rich air-fuel mixture in the motorcycle, improper valve clearance; or excessively advanced spark plug ignition timing. How a spark plug works: The spark plug's electrode repeatedly and continuously generates ignition sparks to ignite the air-fuel mixture in the cylinder. Meanwhile, other parts of the ignition system produce precisely timed high-voltage electrical pulses, creating sparks and explosions that provide the energy required for the engine's power output.
18
2
Share

Does Motorcycle Gear Shifting Grinding Damage the Vehicle?

Motorcycle gear shifting grinding can damage the vehicle, specifically the transmission. Reasons for motorcycle damage: Shifting gears without using the clutch can cause jerking and grinding phenomena, which may severely damage the transmission. Especially when decelerating, using the clutch is essential to avoid transmission damage. Additional wear explanations: Transmission gears often operate under conditions of high speed, high load, and constantly alternating speeds and loads. Apart from normal wear, gears can suffer from impacts due to poor lubricant quality, inadequate lubrication conditions, improper driving operations, and incorrect gear assembly during maintenance, leading to poor gear meshing and startup vibrations.
15
0
Share

Can Motorcycles Be Modified?

Motorcycles can be modified, with the following explanations: Introduction: Modifications to motorcycles must be conducted within the bounds of the law; otherwise, it constitutes illegal modification of motor vehicles. According to relevant regulations, no unit or individual is allowed to assemble motor vehicles or alter the registered structure, construction, or characteristics of a motor vehicle without authorization, including changing the vehicle model, engine number, frame number, or vehicle identification code. Additional Notes: When driving an illegally modified motor vehicle on the road, the public security traffic management department will detain the vehicle, confiscate the illegal devices, order the restoration of the original condition, and impose fines in accordance with the law. For illegally modified motor-assisted bicycles, the public security traffic management department will not issue a safety technical inspection compliance mark.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.